Allen + Roth Merington 3-Light Brushed Nickel Bathroom Vanity Light Manual

1. Consignes de sécurité

AVERTISSEMENT: Risque d'électrocution. Coupez l'alimentation au niveau du disjoncteur ou du tableau électrique avant toute installation ou intervention. Un câblage incorrect peut provoquer une électrocution ou un incendie.

PRUDENCE: For your safety, read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electric shock, fire, or other injuries that could be hazardous or even fatal.

• Assurez-vous que tous les raccordements électriques sont conformes aux codes et règlements locaux, ainsi qu'au Code national de l'électricité (NEC).
• Consultez un électricien qualifié si vous avez des doutes sur les procédures de câblage.
• This fixture is ETL Safety Listed and Damp rated for use in bathrooms.
• Ne pas dépasser la puissance maximale de l'ampoule.tage de 60 watts par ampoule.
• Always use the recommended bulb type (Standard A19 with Medium base E-26).

2. Contenu du colis

Carefully unpack the fixture and check that all parts are included. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact customer service for assistance.

• Vanity Light Fixture (Brushed Nickel)
• 3 Frosted Opal Glass Shades
• Matériel de montage (vis, connecteurs de fils, plaque de montage)
• Manuel d'instructions

Note: Bulbs are not included. Three 60-watt A19 bulbs with a Medium base (E-26) are required (sold separately).

3. Configuration et installation

Before beginning installation, ensure the power is turned off at the circuit breaker. This fixture is designed for hardwired installation.

3.1 Outils nécessaires (non inclus)

• Tournevis (Phillips et tête plate)
• Pinces à dénuder
• Pinces
• Ruban électrique
• Lunettes de sécurité

3.2 étapes d'installation

1. Couper l'alimentation : Locate the circuit breaker or fuse box and turn off the power to the electrical box where the fixture will be installed.
2. Préparez la surface de montage : Remove any existing fixture and its mounting hardware. Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
3. Fixer la plaque de montage : Secure the provided mounting plate to the electrical box using the screws included in the hardware kit.
4. Effectuer les connexions électriques :
   • Connect the bare copper ground wire from the fixture to the ground wire from the electrical box (usually bare copper or green) using a wire nut.
   • Connect the white wire from the fixture to the white (neutral) wire from the electrical box using a wire nut.
   • Connect the black wire from the fixture to the black (hot) wire from the electrical box using a wire nut.
   • Ensure all connections are secure and wrap them with electrical tape for added safety.
5. Montage du support : Alignez soigneusement le dispositif avec la plaque de montage et fixez-le à l'aide des vis fournies.
6. Install Shades: Gently attach the three frosted opal glass shades to the fixture.
7. Installez les ampoules : Screw in three 60-watt A19 Medium base (E-26) bulbs (not included) into the sockets.
8. Restaurer l'alimentation : Remettez le courant au disjoncteur.

Image 1: The Merington 3-Light Vanity Light installed in a bathroom, showcasing its brushed nickel finish and frosted opal shades.

Image 2 : Un gros plan view of the frosted opal glass shades, highlighting their texture and the brushed nickel fixture.

4. Fonctionnement

This vanity light is operated via a standard wall switch (not included). Once installed and powered, simply use the wall switch to turn the light fixture on or off.

• Orientation de l'éclairage : The fixture can be installed with the shades facing up or down, depending on your preference and desired lighting effect.
• Remplacement de l'ampoule : To replace bulbs, ensure the power is off at the circuit breaker. Allow bulbs to cool before touching. Unscrew old bulbs and screw in new ones of the correct type and wattage.

5. Entretien

Regular maintenance will help preserve the appearance and functionality of your vanity light fixture.

• Nettoyage: Turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Entretien de l'ombre : The frosted opal glass shades can be gently wiped with a damp cloth. Ensure they are completely dry before restoring power.
• Inspection: Vérifiez périodiquement le serrage de toutes les connexions électriques et des éléments de fixation.

6. Dépannage

If you experience issues with your vanity light, refer to the following common problems and solutions:

If the problem persists after trying these solutions, consult a qualified electrician or contact customer support.

7. Spécifications

8. Garantie et assistance

Pour obtenir des informations sur la garantie ou une assistance technique, veuillez vous référer au site officiel du fabricant. webConsultez leur site web ou contactez leur service client. Conservez votre reçu d'achat pour toute réclamation au titre de la garantie.

Fabricant: Allen + Roth

Politique de retour: This product typically has a 30-day return/replacement policy. Please check with your retailer for specific return terms.