Introduction
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Vivere Double Cotton Hammock with Space-Saving Steel Stand. Please read all instructions carefully before use to ensure safe and proper setup.
Consignes de sécurité
- Always assemble the hammock stand on a flat, stable surface.
- Assurez-vous que toutes les connexions sont bien serrées avant utilisation.
- Ne pas dépasser la capacité de poids maximale de 450 livres (204 kg).
- Keep children and pets away from the hammock during assembly.
- Regularly inspect the hammock fabric and stand for any signs of wear or damage. Discontinue use if damage is found.
- Do not stand on the hammock or use it as a swing.
- Avoid placing the hammock near open flames or heat sources.
Liste des pièces
Before assembly, ensure all components are present.
- Hammock Fabric (1)
- Steel Stand Base Legs (2)
- Steel Stand Crossbar (1)
- Steel Stand Frame Bars (2)
- J-Hooks with Wing Nuts (2)
- Sac de transport (1)
- Rubber End Caps (4 + 2 spare)
Image: The complete Vivere Double Cotton Hammock with its space-saving steel stand and accompanying carrying bag.
Instructions de montage
Follow these steps for quick and easy assembly. It is recommended to have two people for initial setup, though one person can manage.
Step 1: Lay Out Your Parts
Unpack all components and lay them out on a clear, flat surface. Identify the two base legs, the crossbar, and the two frame bars. Locate the two J-hooks with their wing nuts.
Image: All steel stand components laid out on a grassy area, ready for assembly.
Step 2: Attach Crossbar into Base Legs
Insert the ends of the crossbar into the designated openings on the two base legs. Ensure they are fully seated.
Step 3: Attach Frame Bar to Leg Base
Connect each frame bar to the top of its corresponding leg base. Secure these connections using the provided hand-tightened bolts.
Step 4: Attach J-Hook to Frame Bar
Insert a J-hook into the desired height adjustment hole on each frame bar. Secure it with the wing nut, ensuring it is tightened firmly.
Step 5: Attach Hammock to J-Hook on Frame Bar
Drape the hammock fabric over the J-hooks on both frame bars. Ensure the hammock is evenly distributed and securely resting on the hooks.
Video: An official Vivere video demonstrating the five easy steps to assemble the Vivere Double Cotton Hammock with Space-Saving Steel Stand. This video provides a visual guide for laying out parts, attaching the crossbar, connecting frame bars, securing J-hooks, and finally attaching the hammock.
Image: An adult and child comfortably seated in the assembled Vivere Double Cotton Hammock, demonstrating its capacity for two individuals.
Image: Two children sitting in the Vivere Double Cotton Hammock next to a swimming pool, highlighting its suitability for outdoor relaxation.
Mode d'emploi
To use your hammock, gently sit in the center, allowing the fabric to conform to your body. For optimal comfort, adjust the J-hooks to achieve your preferred hammock height and tension. The hammock is designed for relaxation and light swaying motions.
Entretien
Cleaning the Hammock Fabric
The cotton hammock fabric can be hand washed with mild soap and cold water. Air dry completely before storing. Do not bleach or tumble dry.
Cleaning the Steel Stand
Wipe the steel stand with a damp cloth to remove dirt and debris. For stubborn stains, use a mild detergent. Ensure the stand is dry before storage to prevent rust.
Stockage
When not in use, especially during inclement weather or off-season, disassemble the hammock and stand. Store all components in the provided carrying bag in a dry, cool place to prolong product life.
Image: A close-up of the Vivere Premium Carry Bag, designed for convenient storage and transport of the hammock and stand components.
Dépannage
Hammock feels too low/high
Adjust the J-hooks on the frame bars to a different height setting. There are multiple holes for customization.
Le support semble instable
Ensure all bolts and wing nuts are securely tightened. Verify that the stand is placed on a completely flat and level surface.
Bruits de grincement
Apply a small amount of lubricant to the J-hooks or any moving parts where metal meets metal.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | UHSDO8-25 |
| Dimensions du produit | 250 x 109 x 104 cm (L x l x H) |
| Poids de l'article | 13.8 kg |
| Type de matériau | Fabric (Cotton Hammock), Steel (Stand) |
| Capacité | 204 kilogrammes (450 livres) |
| Taille pliée | 117 x 23 x 18 cm |
Informations sur la garantie
Vivere products are manufactured to high standards and are backed by a limited warranty. Please refer to the product packaging or the official Vivere webConsultez le site pour connaître les conditions générales de garantie spécifiques.
Assistance clientèle
For further assistance, parts replacement, or any inquiries not covered in this manual, please contact Vivere customer support through their official website ou le détaillant où le produit a été acheté.
