Introduction
The Lithonia Lighting FMLWL LED linear wraparound fixture is designed to provide bright, even illumination. This low-maintenance fixture delivers 1,200 lumens of 4000K cool white light with a long-lasting LED engine, ensuring up to 50,000 hours of energy-efficient performance. Its durable construction features a sturdy metal housing with decorative plastic end caps and a white polycarbonate diffuser that distributes light evenly while reducing glare. This fixture is suitable for various indoor applications including hallways, offices, closets, utility areas, bathrooms, and kitchens.
This version is non-dimming.
Consignes de sécurité
AVERTISSEMENT: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Lisez toutes les instructions avant l'installation.
- Assurer le vol d'alimentationtage is correct (120V).
- Ne faites pas et ne modifiez pas de trous ouverts dans un boîtier de câblage ou de composants électriques pendant l'installation du kit.
- Pour éviter tout dommage ou abrasion du câblage, n'exposez pas le câblage aux bords de la tôle ou à d'autres objets tranchants.
- Convient pour damp emplacements.
Contenu du colis
Verify that all parts are included before beginning installation.
- Lithonia Lighting FMLWL LED Wraparound Fixture (Model FMLWL 24 840)
- Manuel d'instructions
- Matériel de montage (vis, connecteurs de fils)
Caractéristiques
| Fonctionnalité | Spécification |
|---|---|
| Marque | Eclairage Lithonia |
| Numéro de modèle | FMLWL 24 840 |
| Taille | 24-Inch (24.45"L x 5.48"W x 2.5"H) |
| Température de couleur | Blanc froid 4000K |
| Luminosité | 1200 Lumens (rated for 70% output for 50,000 hours) |
| Voltage | 120 volts |
| Quoitage | 12 watts |
| Matériel | Alloy Steel, Polycarbonate Shade |
| Type d'installation | Montage encastré (plafond ou mur) |
| Utilisation intérieure/extérieure | Intérieur (Damp (Évaluation de l'emplacement) |
| Caractéristiques spéciales | Easy to Install, Non-dimming |
| Certifications | UL and CSA listed, DLC |
Installation
This fixture is designed for easy surface-mount installation on ceilings or walls. Always ensure power is disconnected before starting installation.
Étapes d'installation :
- Préparez le montage : Remove fixture components and parts pack. Check that all parts are included. Carefully remove the diffuser from the housing.
- Câblage d'accès : Remove the wireway cover by removing two screws securing the cover to the fixture housing. Locate the black supply wire, the white neutral wire, and the green grounding wire. Push all three wires out the back of the fixture through the coined hole.
- Mise à la terre : Hold the fixture housing firmly and connect the green ground wire from the fixture to the bare copper ground wire from the junction box using a wirenut.
- Connexions électriques : Use wirenuts to connect the black fixture wire to the black supply wire and the white (neutral) fixture wire to the white supply wire.
- Montage: Align keyholes on the back of the fixture housing with screws previously installed in the junction box. Lift the fixture up, rotate clockwise, and tighten screws to secure the housing assembly against the ceiling.
- Remonter: Starting at one end of the housing, insert the diffuser slot onto the edge of the housing. Carefully squeeze the diffuser to engage the opposite side with the housing. Continue this action down the length of the diffuser until fully installed onto the housing.
Aide visuelle :
Description de la vidéo : This video provides a detailed product overview and installation guide for the FMLWL LED Wraparound Light. It visually demonstrates how to disassemble the fixture, connect the wiring, mount it to the ceiling, and reattach the diffuser, including steps for selecting color temperature and lumen output.
Images du produit :
Mode d'emploi
The Lithonia Lighting FMLWL 24 840 is a non-dimmable fixture. It operates by a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture ON or OFF.
Entretien
This LED fixture is designed for low maintenance. To ensure optimal performance and appearance:
- Nettoyage: Disconnect power before cleaning. Wipe the exterior of the fixture with a soft, damp Chiffon. N’utilisez pas de nettoyants abrasifs ni de solvants, car ils pourraient endommager la finition ou le diffuseur.
- LED Engine: The integrated LED engine is designed for long life and does not require bulb replacement.
Dépannage
If the fixture does not operate correctly, refer to the following:
- Pas de lumière :
- Check that power is supplied to the fixture at the circuit breaker.
- Assurez-vous que toutes les connexions filaires sont sécurisées.
- Lumière vacillante:
- Verify that the fixture is not connected to a dimmer switch, as this model is non-dimmable.
- Vérifiez les connexions de câblage desserrées.
Si les problèmes persistent, consultez un électricien qualifié.
Garantie et assistance
This Lithonia Lighting FMLWL LED fixture is backed by a Garantie limitée de 5 ans. For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Lithonia Lighting website.
