TC Electronic T2 Reverb Effects Pedal User Manual

Introduction

The TC Electronic T2 Reverb effects pedal provides a diverse range of reverb effects for guitar and other instruments. This manual details the pedal's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and technical specifications to ensure optimal performance.

Produit terminéview

The T2 Reverb pedal features intuitive controls for shaping your sound and a robust design for reliable use. Familiarize yourself with the pedal's components:

Bouton DECAY : Contrôle la longueur de la réverbération.
Bouton TONE : Adjusts the brightness or darkness of the reverb.
Bouton de mélange : Balances the ratio between the dry (unaffected) signal and the wet (effected) signal.
Reverb Type Selector: A rotary switch to select from various reverb algorithms (I-VIII, E1, E2, TP).
Pédale de commande : Active ou contourne l’effet.
Prises d'entrée/sortie : For connecting your instrument and amplifier.
Puissance d'entrée : For connecting a 9V DC power supply.

TC Electronic T2 Reverb Pedal top view showing Decay, Tone, Mix knobs, Reverb Type selector, and footswitch. — Figure 1 : Haut view of the TC Electronic T2 Reverb pedal, highlighting the control knobs and footswitch.

Incliné view of TC Electronic T2 Reverb Pedal showing input and output jacks. — Figure 2 : Angulaire view of the TC Electronic T2 Reverb pedal, illustrating the input and output jacks on the sides.

Installation

Connexion électrique : Connect a 9V DC power adapter (center negative, not included) to the power input jack. Alternatively, the pedal can be powered by a 9V battery (not included) by opening the battery compartment.
Connexion de l'instrument : Connectez votre instrument (par exemple, une guitare) à la prise d'entrée située sur le côté droit de la pédale à l'aide d'un câble d'instrument standard de 6,35 mm (1/4 pouce).
AmpConnexion lifier: Connectez la prise de sortie sur le côté gauche de la pédale à votre ampEntrée de l'amplificateur utilisant un câble d'instrument standard de 6,35 mm (1/4 pouce).
Stereo Operation (Optional): For stereo output, connect the second output jack to a second ampamplificateur ou périphérique d'entrée stéréo.

Assurez-vous que toutes les connexions sont sécurisées avant de mettre sous tension votre ampAmplificateur et pédale.

Mode d'emploi

Fonctionnement de base

Mise sous tension : Once connected, press the footswitch to engage the effect. The LED indicator will illuminate. Press again to bypass the effect.
Sélection du type de réverbération : Rotate the Reverb Type Selector knob to choose from the available reverb algorithms (I through VIII, E1, E2). Each setting offers a distinct reverb character.
Adjusting Reverb Parameters:
- Utilisez le POURRITURE knob to control the duration of the reverb.
- Utilisez le TONIFIER knob to adjust the frequency content of the reverb, making it brighter or darker.
- Utilisez le MÉLANGER knob to blend the dry signal with the reverb effect. A higher setting increases the effect's prominence.

TonePrint Feature

The "TP" setting on the Reverb Type Selector activates the TonePrint feature. TonePrint allows you to upload custom-tuned reverb sounds created by artists or design your own using the TC Electronic TonePrint app. Connect your pedal to a computer via USB (cable not included) or beam TonePrints wirelessly from your smartphone to the pedal's pickup.

Entretien

Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'extérieur de la pédale. Évitez les nettoyants abrasifs et les solvants.
Remplacement de la batterie : If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. To replace, open the battery compartment on the underside of the pedal.
Stockage: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight, when not in use. Disconnect power and remove the battery if storing for extended periods.

Dépannage

Problème	Cause possible	Solution
Pas de son ou signal faible	Incorrect cable connections, dead battery, faulty power supply, volume knobs on instrument/amp refusé.	Check all cable connections. Replace battery or verify power supply. Ensure instrument and amplifier volumes are set appropriately.
Bruit ou bourdonnement indésirable	Ground loop, faulty cables, interference from other electronics, improper power supply.	Use shielded cables. Try a different power outlet or isolated power supply. Move pedal away from other electronic devices.
Effect not engaging (LED off)	Pas d'alimentation, interrupteur au pied défectueux.	Verify power connection and battery status. If problem persists, contact support.
TonePrint not loading	Incorrect app usage, connection issues.	Ensure the TonePrint app is updated and the pedal is correctly connected (USB or beaming). Refer to the TonePrint app's instructions for detailed guidance.

Caractéristiques

Modèle: T2
Poids de l'article : 1 pound (approximately 454 grams)
Dimensions du produit : 4.61 x 2.48 x 2.91 pouces (11.7 x 6.3 x 7.4 cm)
Source d'alimentation : 9V DC (center negative) power adapter or 9V battery
Voltage: 9 volts
Format des signaux : Analogique
Interface matérielle: HP-HSC

Garantie et assistance

TC Electronic products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official TC Electronic webConsultez leur site web ou contactez directement leur service client. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

Officiel Website: www.tcelectronic.com

	TC Electronic NR-1 Nova Reverb Guitar Effects Pedal User Manual Comprehensive user manual for the TC Electronic NR-1 Nova Reverb programmable digital reverb guitar effects pedal, covering operation, setup, specifications, and features.
	Guide de démarrage rapide de TC Electronic Hall of Fame 2 Reverb A concise guide to the TC Electronic Hall of Fame 2 Reverb pedal, covering its controls, features, and basic operation. Includes information on USB connectivity, TonePrint editing, MASH function, and FCC compliance.
	Guide de démarrage rapide du mini-amplificateur de réverbération TC Electronic Hall of Fame 2 Un guide concis de la pédale d'effets TC Electronic Hall of Fame 2 Mini Reverb, couvrant les commandes, les connexions et les informations de conformité.
	Guide de démarrage rapide de la réverbération Skysurfer de TC Electronic Un guide concis sur le TC Electronic Skysurfer Reverb, détaillant ses commandes, ses connexions et ses fonctionnalités pour des effets de réverbération de qualité studio.
	TC Electronic INFINITE SAMPLE SUSTAINER Quick Start Guide Concise quick start guide for the TC Electronic INFINITE SAMPLE SUSTAINER guitar effects pedal, detailing its controls, features, and basic operation.
	Manuel d'utilisation de la réverbération TC Electronic Hall of Fame Manuel d'utilisation complet pour la pédale de réverbération TC Electronic Hall of Fame, couvrant les consignes de sécurité, les fonctionnalités, les commandes, les types de réverbération, TonePrint, les modes de contournement et les spécifications techniques.

TC Electronic T2