Samson HP30 Stereo Headphones User Manual
Model: SAM HP30 | Brand: SAMSON
Introduction
The Samson HP30 Stereo Headphones are designed to deliver quality sound for various applications, from home studio use to on-the-go listening. These headphones feature a lightweight, closed-back design with an adjustable headband, ensuring a comfortable listening experience. Equipped with 40mm full-range drivers, they offer a wide frequency response from 20Hz to 20kHz and an impedance level of 32 ohms, providing balanced sound reproduction. They are suitable for use with keyboards, guitars, MP3 players, and other media devices.

Figure 1: Samson HP30 Stereo Headphones, showcasing their over-ear design and adjustable headband.
Installation
The HP30 headphones are designed for straightforward connectivity. To begin using your headphones:
- Identifiez la prise audio : The headphones come with a 3.5mm audio jack.
- Connectez-vous à votre appareil : Plug the 3.5mm audio jack into the corresponding audio output port on your device. This could be a keyboard, guitar amplifier, MP3 player, media player, laptop, desktop, tablet, or cellphone.
- Use the Adapter (if necessary): If your device requires a larger 1/4-inch connection, use the included 1/8-inch to 1/4-inch adapter. Attach the adapter to the 3.5mm jack before plugging it into your device.

Figure 2: The 3.5mm audio jack and the 1/4-inch adapter for versatile device compatibility.
Mode d'emploi
Once connected, follow these steps for optimal use:
- Ajustez le bandeau : Gently extend or retract the adjustable headband to ensure a snug yet comfortable fit over your head. The earcups should fully cover your ears.
- Positionnez les oreillettes : Ensure the earcups are properly positioned over your ears for maximum sound isolation and comfort. The closed-back design helps to minimize external noise.
- Contrôle du volume : Adjust the volume directly from your connected audio source (e.g., MP3 player, keyboard, computer). The HP30 headphones do not feature inline volume controls.
- Music Practice: For quiet music practice with instruments like keyboards or guitars, the HP30 provides clear and isolated audio monitoring, allowing you to focus on your sound without disturbing others.
Entretien
To ensure the longevity and performance of your Samson HP30 Stereo Headphones, follow these maintenance guidelines:
- Nettoyage: Use a soft, dry cloth to wipe the exterior of the headphones. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish and materials.
- Entretien des coussinets d'oreille : The earpads are made from protein leather. Gently wipe them with a damp Essuyez-les avec un chiffon si nécessaire et laissez-les sécher complètement à l'air libre avant utilisation.
- Stockage: When not in use, store the headphones in a clean, dry place away from extreme temperatures and direct sunlight. Avoid tangling the cable to prevent damage.
- Manipulation des câbles : Always grasp the plug, not the cable, when connecting or disconnecting the headphones from a device to prevent internal wire damage.
Dépannage
If you encounter issues with your HP30 headphones, consider the following common solutions:
- Pas de son :
- Ensure the audio jack is fully inserted into the device's port.
- Check the volume level on your audio source; it might be muted or set too low.
- Test the headphones with a different audio source to rule out a device-specific issue.
- Vérifiez que le câble ne présente aucun dommage visible ni pliure.
- Son déformé :
- Baissez le volume de votre source audio.
- Ensure the audio jack and adapter (if used) are clean and free of debris.
- Test with another audio source to determine if the distortion is from the headphones or the source.
- Coupe inconfortable :
- Adjust the headband carefully until a comfortable fit is achieved.
- Ensure the earcups are not pressing too hard or too loosely against your ears.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Nom du modèle | Casque stéréo |
| Marque | SAMSON |
| Placement des oreilles | Sur l'oreille |
| Technologie de connectivité | Câblé |
| Taille du pilote audio | 40 millimètres |
| Réponse en fréquence | 20 Hz - 20 kHz |
| Impédance | 32 Ohms |
| Prise pour casque | 3.5 mm Jack |
| Contrôle du bruit | Isolation acoustique |
| Matériel | Cuir protéiné |
| Dossier spécial | Léger |
| Poids de l'article | 0.01 onces |
| Appareils compatibles | Laptops, Desktops, Tablets, Cellphones, Music Production Equipment |
Produit terminéview Vidéo
Vidéo 1 : Un officiel surview of the Samson HP30 Stereo Headphones, highlighting key features such as 40mm full-range drivers, wide frequency response (20Hz to 20kHz), 32 ohms impedance, lightweight closed-back design, adjustable headband, and compatibility with various music instruments and media players via its 3.5mm jack.
Garantie et assistance
For warranty information, technical support, or service inquiries regarding your Samson HP30 Stereo Headphones, please refer to the documentation included in your product packaging or visit the official SAMSON webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.