Furman P-8 PRO C Power Conditioner Instruction Manual

1. Introduction

The Furman P-8 PRO C is a professional-grade power conditioner designed to provide advanced protection and clean power for your valuable audio, video, and electronic equipment. It incorporates Furman's exclusive Series Multi-Stage Protection (SMP), technologie de filtrage linéaire (LiFT) et Extreme Voltage Shutdown (EVS) to safeguard against power surges, spikes, and AC line noise, ensuring optimal performance and longevity of your connected devices.

2. Consignes de sécurité

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not remove cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

• Always connect the P-8 PRO C to a properly grounded 20-amp prise électrique.
• Do not overload the unit. The total current draw of all connected equipment must not exceed 20 amps.
• Assurez une ventilation adéquate autour de l'appareil. Ne bloquez aucune ouverture de ventilation.
• Keep liquids away from the unit.
• Avertissement concernant la Proposition 65 : Ce produit peut contenir des produits chimiques reconnus par l'État de Californie pour provoquer le cancer et des anomalies congénitales ou d'autres troubles de la reproduction.

3. caractéristiques du produit

3.1. Advanced Protection Technologies

• Série Multi-Stage Protection (SMP): Furman's SMP circuit provides superior surge suppression, absorbing and dissipating damaging transient voltages without sacrificing itself. This ensures continuous protection for your equipment.
• Linear Filtering Technology (LiFT): LiFT significantly reduces AC line noise across a wide frequency range, delivering cleaner power to your sensitive electronics. This results in improved audio clarity and video resolution.
• Volume extrêmetage Shutdown (EVS): The EVS circuit continuously monitors incoming voltage. If it detects an unsafe overvoltage condition (exceeding 137 volts), it automatically shuts down the connected equipment to prevent damage, then restores power once voltage revient à un niveau sûr.

3.2. Outlets and Power

• Total des points de vente : 9 (1 front-panel convenience outlet, 8 rear-panel outlets).
• Rear Outlets: Conçu avec ample spacing to accommodate 'wall wart' power supplies and feature security strapping to prevent accidental disconnections.
• Cordon d'alimentation : Integrated 10-foot, 12-gauge power cord.
• Ampâge : 20-amp capacity, requiring a 20-amp female receptacle or a Furman ADP-1520B adapter for connection.

3.3. Fonctionnalités supplémentaires

• Connecteur BNC : A BNC connector is located on the rear panel for optional GN-LED or GN-I gooseneck lights (sold separately) to illuminate the rear of your rack.
• Conception montable en rack : Standard 1U rack-mount chassis for easy integration into professional setups.

4. Configuration et installation

4.1. Montage en rack

The P-8 PRO C is designed for standard 1U rack installation. Secure the unit using appropriate rack screws (not included) through the mounting ears on both sides of the front panel. Ensure sufficient space for ventilation.

4.2. Connexion électrique

1. Connect the integrated 10-foot, 12-gauge power cord from the P-8 PRO C to a dedicated 20-amp, 120-volt AC grounded electrical outlet. If a 20-amp receptacle is not available, use a Furman ADP-1520B adapter.
2. Ensure the main power switch on the front panel of the P-8 PRO C is in the OFF position before connecting any equipment.

4.3. Raccordement des équipements

Plug your audio, video, or electronic equipment into the 8 rear-panel outlets and the 1 front-panel convenience outlet. Utilize the wide spacing of the rear outlets for larger power adapters. For critical equipment, consider using the security strapping to prevent accidental unplugging.

4.4. Optional Gooseneck Lights

If desired, connect optional Furman GN-LED or GN-I gooseneck lights to the BNC connector on the rear panel for rack illumination.

5. Fonctionnement

5.1. Mise sous/hors tension

Once all equipment is connected, flip the main power switch on the front panel to the ON position. The P-8 PRO C will power on, and connected equipment will receive conditioned and protected power.

5.2. Voyants lumineux

• Protection OK (Green LED): This indicator illuminates green when the SMP circuit is active and providing surge protection. If this light is off, the unit's surge protection has been compromised, and the unit should be serviced.
• Volume extrêmetage (Red LED): This indicator illuminates red when the incoming voltage exceeds safe operating levels (above 137 volts). The EVS circuit will shut down power to connected equipment until the voltage returns to a safe range.

6. Entretien

The Furman P-8 PRO C is designed for reliable, maintenance-free operation. No user-serviceable parts are inside. For cleaning, disconnect the unit from the power source and wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

7. Dépannage

7.1. No Power to Outlets

• Check the main power switch on the front panel to ensure it is in the ON position.
• Verify that the P-8 PRO C is securely plugged into a functioning 20-amp prise murale.
• Check the circuit breaker on the P-8 PRO C (usually located near the power cord input) and reset if tripped.
• If the 'Extreme Voltage' indicator is lit, the incoming voltage is too high. The unit will automatically restore power when conditions normalize.
• If the 'Protection OK' indicator is off, the surge protection circuit may be compromised. Discontinue use and contact Furman support.

7.2. Audio/Video Noise

• Assurez-vous que tous les équipements sont correctement mis à la terre.
• Vérifiez les connexions de câble desserrées.
• The LiFT technology in the P-8 PRO C is designed to reduce AC line noise. If noise persists, try isolating the source of the noise by unplugging devices one by one.

8. Spécifications

9. Contenu de la boîte

• 1 x Furman P-8 PRO C Power Conditioner

10. Garantie et assistance

Furman products are backed by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official Furman webConsultez leur site web ou contactez leur service client. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.