Buderus WPT 270/2 I-S Heat Pump Water Heater Instruction Manual

1. Consignes de sécurité

Important: Read all instructions carefully before installation, operation, or maintenance of the Buderus WPT 270/2 I-S Heat Pump Water Heater. Failure to follow these instructions could result in property damage, personal injury, or death.

• L'installation et l'entretien doivent être effectués par un technicien qualifié.
• Assurez-vous que l'appareil est correctement mis à la terre afin d'éviter tout risque d'électrocution.
• N’utilisez pas l’appareil si une pièce quelconque est endommagée ou dysfonctionne.
• Gardez les matériaux inflammables loin du chauffe-eau.
• Assurez une ventilation adéquate autour de l'appareil.
• The appliance must be installed in a frost-free environment.
• Maximum operating temperature for stored hot water is 80 °C. Maximum operating temperature for heated water is 110 °C.
• Maximum operating pressure for stored hot water side is 10 bar. Maximum operating pressure for heated water side is 6 bar.

2. Produit terminéview

The Buderus Logafix WPT 270/2 I-S is a highly efficient heat pump water heater designed to utilize up to 70% free environmental energy from ambient air and appliance waste heat for water heating. This unit offers flexible installation options and advanced features for domestic hot water supply.

Figure 1: Buderus WPT 270/2 I-S Heat Pump Water Heater. This image shows the cylindrical white unit with control panel and various connections.

Caractéristiques principales :

• Efficient hot water generation using ambient air.
• Flexible installation: standalone or integrated with central heating/solar systems.
• Removable heat pump section for easier installation.
• Advanced control with illuminated display and multiple time programs.
• Additional functions: basement dehumidification, ventilation, and air cooling.
• Corrosion-resistant Buderus thermoglaze Duoclean plus and magnesium anode.
• High energy efficiency (95%) and COP (3.2 according to EN16147).

3. Configuration et installation

Proper installation is crucial for the safe and efficient operation of your Buderus WPT 270/2 I-S. This section provides general guidelines; always refer to local regulations and consult a qualified installer.

3.1 Sélection du site

• Emplacement: The unit should be installed in a frost-free basement or utility room.
• Température ambiante: The temperature of the intake air must be between +5 °C and +35 °C.
• Ventilation: Ensure adequate air circulation for optimal heat pump performance.
• Espace: Allow sufficient space around the unit for maintenance and service.

3.2 Connexion électrique

• The unit requires a 230 V/50 Hz electrical connection.
• The electric heating element is 2 kW.
• All electrical work must comply with local codes and be performed by a certified electrician.

3.3 Raccordements d'eau

• Connect the cold water inlet and hot water outlet according to the markings on the unit.
• Assurez-vous que tous les raccords sont étanches.
• The unit includes a smooth tube heat exchanger for optional connection to a solar system or boiler.

3.4 Air Duct System (Optional)

• The WPT 270/2 I-S can be connected to an air duct system.
• It features two DN160 supports for optional duct system connection.
• This allows for additional functions such as basement dehumidification, ventilation, and air cooling.

3.5 Démarrage initial

• After all connections are made and checked, fill the water tank completely before switching on the power.
• Follow the on-screen prompts on the control panel for initial configuration.

4. Mode d'emploi

The Buderus WPT 270/2 I-S features an intuitive control panel with an illuminated display for easy operation.

4.1 Panneau de contrôle

The illuminated display provides information on current status, temperature settings, and operational modes. Use the navigation buttons to access menus and adjust settings.

4.2 réglages de température

• Fonctionnement de la pompe à chaleur : Hot water temperature can be set up to 60 °C using the heat pump.
• Élément chauffant électrique : For higher temperatures, the integrated electric heating element can raise the water temperature up to 70 °C.
• Adjust the desired temperature via the control panel settings.

4.3 Time Programs

• The unit supports multiple time programs, allowing you to schedule hot water production to match your daily routine and optimize energy consumption.
• Refer to the control panel menu for setting up and managing time programs.

4.4 Désinfection thermique

The WPT 270/2 I-S includes a thermal disinfection function to prevent bacterial growth (e.g., Legionella). This function periodically heats the water to a high temperature. Consult the manual for activation and scheduling of this feature.

4.5 Additional Functions (with Air Duct System)

If connected to an air duct system, the unit can provide:

• Déshumidification du sous-sol : Helps reduce humidity levels in the basement.
• Fonction de ventilation : Improves air circulation.
• Refroidissement par air : Provides a degree of air cooling in the connected space.

5. Entretien

Regular maintenance ensures the longevity and efficient operation of your Buderus WPT 270/2 I-S. Always disconnect power before performing any maintenance.

5.1 Protection contre la corrosion

• The internal surfaces in contact with hot water are protected with Buderus thermoglaze Duoclean plus, which is corrosion-resistant according to DIN 4753-3.
• A magnesium anode provides additional cathodic corrosion protection. This anode should be inspected periodically (e.g., annually) by a qualified technician and replaced if significantly depleted.

5.2 Nettoyage et inspection généraux

• Keep the exterior of the unit clean. Use a soft, damp chiffon. N'utilisez pas de nettoyants abrasifs.
• Periodically check for any leaks around connections.
• Ensure that the air intake and exhaust vents (if applicable) are free from obstructions.
• It is recommended to have the unit professionally inspected and serviced annually.

6. Dépannage

Cette section propose des solutions de dépannage de base pour les problèmes courants. Pour les problèmes plus complexes, veuillez contacter un technicien qualifié.

6.1 No Hot Water / Insufficient Hot Water

• Vérifiez l'alimentation : Vérifiez que l'appareil est branché et que le disjoncteur n'a pas sauté.
• Vérifiez les paramètres de température : Verify the desired temperature is set correctly on the control panel.
• Programmes horaires : Ensure no time program is preventing hot water production.
• Débit d'air : Check if the air intake or exhaust is blocked.
• Codes d'erreur : Look for any error messages on the display and consult the full manual for their meaning.

6.2 Bruits inhabituels

• De légers bruits de fonctionnement sont normaux.
• If you hear loud or unusual noises, turn off the unit and contact a service technician.

6.3 Fuites

• Immediately turn off the water supply and power to the unit.
• Identifiez la source de la fuite.
• Contact a qualified plumber or service technician.

7. Spécifications

8. Garantie et assistance

For detailed warranty information, please refer to the warranty card included with your product or visit the official Buderus website. In case of technical issues, service requests, or questions not covered in this manual, please contact Buderus customer support or your authorized dealer.

Fabricant: Budérus

Website: www.buderus.com (ou région pertinente) webet données clients liées)