Manuel d'utilisation de la radiocommande WFLY X9 pour voiture RC

1. Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your WFLY X9 RC Car Radio system. The WFLY X9 is a high-performance 2.4GHz 9-channel radio transmitter designed for precise control of various RC vehicles, including cars, boats, tanks, and robots. It features advanced technology such as a capacitive touch screen, GPS support, and extensive model memory.

2. Produit terminéview

2.1 Principales caractéristiques

• 3.5-inch capacitive touch color screen for intuitive control.
• 9-channel RC radio with a compact RG206S receiver.
• External foldable antenna and LED RGB strip light.
• Supports GPS and external Gyro functions, ideal for racing cars and stunt cars.
• 40 models memory storage and MOA (Motor On Axle) function for crawlers.
• Voice broadcast support.
• USB online upgrade capability.
• Type-C charging for 1S LiPo battery.

2.2 Contenu de la boîte

• WFLY X9 Transmitter
• RG206S Receiver

2.3 Composants du produit

Figure 1: The WFLY X9 RC Transmitter and its accompanying RG206S Receiver. The transmitter features a pistol-grip design with a steering wheel and a screen on top, while the receiver is a small, rectangular unit with multiple ports.

Figure 2 : Un aperçu détaillé view of the RG206S Receiver, showing its channel ports (1-6), external voltage detection port (Ext. Volt), GPS port, and W.BUS port. A 'SET' button is also visible for binding and configuration.

Figure 3: The 3.5-inch capacitive touch screen interface of the WFLY X9 transmitter. The screen displays various parameters such as timer, RX voltage, vol externetage, speed, and channel outputs (CH1, CH2, CH3). Menu, Lock, and User menu buttons are visible on the screen.

Figure 4: Illustration of the servo channel limit function. This feature allows setting the servo angle to prevent mechanical damage by ensuring servo output remains within the mechanical travel limits of the connected component.

3. Installation

3.1 Installation de la batterie de l'émetteur

1. Locate the battery compartment on the bottom of the WFLY X9 transmitter.
2. Ouvrez le couvercle du compartiment à piles.
3. Insert either a 1S LiPo battery or four AA dry batteries, ensuring correct polarity.
4. Fermez soigneusement le couvercle du compartiment à piles.

Note: The transmitter supports a working voltage gamme de 3.5V à 6.0V.

3.2 Connexion du récepteur

1. Connect the RG206S receiver to your RC vehicle's electronic speed controller (ESC) and servos.
2. Ensure that the channels (CH1-CH6) on the receiver correspond to the correct functions (e.g., steering, throttle) on your vehicle.
3. If using GPS or external voltage detection, connect the respective modules to the 'GPS' and 'Ext. Volt' ports on the receiver.

Note: The receiver supports a working voltage gamme de 3.5V à 9.0V.

3.3 Procédure contraignante

Pour établir la communication entre l'émetteur et le récepteur, un processus de liaison est nécessaire :

1. Éteignez l’émetteur et le récepteur.
2. Press and hold the 'SET' button on the RG206S receiver while powering it on. The receiver's LED indicator will flash rapidly, indicating it is in binding mode.
3. Turn on the WFLY X9 transmitter.
4. Navigate to the binding menu on the transmitter's touch screen (refer to the on-screen interface for specific steps).
5. Initiate the binding process from the transmitter.
6. Once binding is successful, the receiver's LED indicator will turn solid, and the transmitter will display a successful connection message.
7. Turn off both devices and then power them on normally to confirm the connection.

4. Fonctionnement

4.1 Contrôles de base

• Volant: Controls the left/right direction of your RC vehicle.
• Gâchette d'accélérateur : Tirez pour accélérer, poussez pour freiner ou reculer.
• Garnitures : Adjust the neutral position of steering and throttle channels for fine-tuning.
• D/R (Double Taux) : Adjusts the maximum throw of steering or other channels.

Navigation sur écran tactile 4.2

The WFLY X9 features a 3.5-inch capacitive touch screen for easy navigation and configuration. Tap icons and menus to access various settings:

• Écran principal: Displays real-time telemetry data such as battery voltage (transmitter and external), signal strength, and timer.
• Bouton Menu : Permet d'accéder au menu principal des paramètres.
• Menu utilisateur : Raccourcis personnalisables pour les fonctions fréquemment utilisées.
• Sélection du modèle : Select from up to 40 stored models, each with its own unique settings.

4.3 fonctions avancées

• Program Mix: Configure up to 5 custom mixes for complex control scenarios (e.g., 4-wheel steering).
• Diffusion vocale : Enable voice prompts for telemetry data or system alerts.
• Assistance GPS : When connected to a compatible GPS module, the system can display real-time speed detection.
• External Gyro Function: Enhance stability and control for racing or stunt applications.
• Limite de canaux : Protect your servos and mechanical components by setting maximum travel limits for each channel.

5. Entretien

5.1 Chargement de l'émetteur

If using a 1S LiPo battery, charge the transmitter via the Type-C USB port. Connect a standard USB charger (not included) to the Type-C port on the transmitter. The screen will indicate charging status.

5.2 Nettoyage et stockage

• Wipe the transmitter and receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Store the system in a cool, dry place, away from direct sunlight and extreme temperatures (-10℃ to +60℃ operating temperature).
• Retirez les piles de l'émetteur si vous prévoyez de le stocker pendant une période prolongée afin d'éviter les fuites.

5.3 Mise à jour du micrologiciel

The WFLY X9 supports USB online firmware upgrades. Visit the official WFLY website for the latest firmware versions and instructions. Connect the transmitter to your computer via a USB cable to perform the upgrade.

6. Dépannage

6.1 Problèmes courants

7. Spécifications

7.1 Transmitter (WFLY X9)

• Vol de travailtage: 3.5V~6.0V (1S LiPo battery / 4×AA dry battery)
• Courant de travail : 260~400mA
• Saut de fréquence : FHSS
• Modulation: LORA
• Application: RC cars, boats, tanks, robots, etc.
• Résolution: 4096
• Bande de fréquence : 2.4 GHz (bidirectionnel)
• Puissance de transmission : ≤100mW
• Gamme: >600m (ideal conditions)
• Température de fonctionnement : -10℃ à +60℃
• Interface du simulateur : 3.5mm (PPM)
• Stockage: Mémoire de 40 modèles
• Program Mix: 5 modèles
• Diffusion vocale : Soutien
• Chargement : Support 1S LiPo battery (Type C)
• Langue: Anglais
• Mise à niveau: USB online upgrade
• Servo: Soutien
• Afficher: 3.5” 480*320 capacitive touch screen
• Dimensions: Approximately 33.5 x 22.0 x 12.5 mm (Transmitter body, not including wheel/handle)
• Poids: 318g

7.2 Receiver (RG206S)

• Nom du modèle : RG206S
• Chaînes : 6 channels (PWM)
• Courant de travail : 95 mA
• Bande de fréquence : 2.4GHz (two-way transmission)
• Vol de travailtage: 3.5 V à 9.0 V
• Modulation: LORA
• GPS: Support speed detection
• Application: RC cars, boats, tanks, robots, etc.
• Résolution: Full channel 4096
• Température de fonctionnement : -10℃ à +60℃
• Vol externetage Détection : 1 à 36 V CC
• ppm: Support 180/270°
• W.BUS : Support S.BUS
• Mise à niveau: USB online upgrade
• Dimensions: 33.6 x 22.3 x 12.3 mm
• Poids: 7.6g

7.3 Dimensions physiques

• Dimensions du produit (émetteur) : 8 x 6.5 x 4.7 inches (approximate, from product specifications)
• Poids total de l'article : 1.54 livres

8. Garantie et assistance

Specific warranty information for the WFLY X9 RC Car Radio is not provided in this manual. Please refer to the product packaging or the retailer's website pour les détails de la garantie.

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding parts and service, please contact the seller or the official WFLY customer support channels. Keep your purchase receipt as proof of purchase for any warranty claims.