One Control Minimal Series AB Box Instruction Manual

Introduction

The One Control Minimal Series AB Box is a compact and versatile signal routing device designed for musicians. It allows you to control the direction of your audio signal path, enabling functions such as selecting between amplifiers, muting your signal, or switching between different input sources. Its robust design ensures durability and low noise performance.

Produit terminéview

The AB Box features one input and two outputs (A and B), along with a footswitch to toggle between the outputs. It also includes a 9-volt power input for LED indicator functionality.

De haut en bas view of the One Control Minimal Series AB Box, showing the input, two outputs, power input, and footswitch. — This image displays the top and side view of the One Control Minimal Series AB Box. Visible components include the single input jack, two output jacks (A and B), the 9V power input, and the footswitch for toggling between outputs. The unit is compact and black.

Caractéristiques principales :

Conception compacte et durable.
One input, two outputs (A and B).
Footswitch for toggling between outputs.
LED indicators for active output (requires power).
Can operate passively without power (LEDs will not function).

Installation

Connecting as an Output Selector (1 Input to 2 Outputs):

Connectez votre instrument (par exemple, une guitare) au SAISIR jack on the AB Box.
Connectez un câble à partir du SORTIE A jack to your first destination (e.g., Amplifier A).
Connectez un câble à partir du SORTIE B jack to your second destination (e.g., Amplifier B or a tuner).
For LED functionality, connect a 9-volt center negative power supply to the POUVOIR input. The unit will function passively without power, but the LEDs will not illuminate.

Connecting as an Input Selector (2 Inputs to 1 Output):

Connect your first instrument to the SORTIE A jack (used as Input 1 in this configuration).
Connect your second instrument to the SORTIE B jack (used as Input 2 in this configuration).
Connectez un câble à partir du SAISIR jack (used as Output in this configuration) to your ampAmplificateur ou pédale suivante dans la chaîne de signal.
For LED functionality, connect a 9-volt center negative power supply to the POUVOIR input. The unit will function passively without power, but the LEDs will not illuminate.

Mode d'emploi

Toggling Outputs/Inputs:

Once connected, press the footswitch to toggle between the active output (A or B) or active input (A or B). If a power supply is connected, the red and blue LEDs will indicate which path is currently active.

Mute/Tuner Switch Functionality:

To use the AB Box as a mute or tuner switch, connect your main signal path to one output (e.g., Output A) and your tuner to the other output (e.g., Output B). When you switch to Output B, your main signal will be muted, allowing you to tune silently. Even without a tuner connected, switching to an unused output will mute your signal.

Entretien

Veillez à ce que l'appareil reste propre et exempt de poussière et de débris. Utilisez un chiffon doux et sec pour le nettoyer.
Évitez d'exposer l'appareil à des températures extrêmes, à l'humidité ou à la lumière directe du soleil.
Do not attempt to open the enclosure or modify the internal circuitry, as this may void the warranty and cause damage.
Assurez-vous que tous les câbles sont correctement connectés afin d'éviter toute perte de signal ou tout fonctionnement intermittent.

Dépannage

Pas de son :

Check all cable connections to ensure they are secure and correctly plugged into the designated input/output jacks.
Verify that the footswitch is set to the desired active output/input.
Test cables and other equipment in your signal chain to rule out external issues.

Les LED ne s'allument pas :

Ensure a 9-volt center negative power supply is connected to the POWER input.
Check that the power supply is functioning correctly and providing the specified voltage.
The unit can operate passively without power, but the LEDs will not light up. This is normal behavior.

Bruit/bourdonnement indésirable :

Assurez-vous d'une mise à la terre correcte pour tous les équipements connectés.
Use high-quality, shielded instrument cables.
If using two amplifiers, ground loop issues may occur. Consider using a ground loop isolator if necessary.

Caractéristiques

Poids	140 g (environ 4.94 onces)
Dimensions (without switches/jacks)	38W X 94D X 32H mm (approximately 1.5W x 3.7D x 1.26H inches)
Dimensions (with switches/jacks)	54W X 101D X 48H mm (approximately 2.13W x 3.98D x 1.89H inches)
Alimentation électrique	9-volt DC, center negative (for LED functionality)
Numéro de modèle	Minimal AB Box

Garantie et assistance

For warranty information and technical support, please refer to the official One Control website or contact your authorized dealer. Specific warranty terms may vary by region and retailer.

	Boucle noire One Control Minimal Series avec tampon BJF : Produit terminéview et spécifications Discover the One Control Minimal Series Black Loop, a versatile loop switcher with an integrated BJF-buffer, offering true bypass or buffered operation and dual DC outputs for guitar effects setups. Learn about its features, specifications, and the advanced functionality of the Minimal Series.
	One Control Chamaeleo Tail Loop MK2 User Manual User manual for the One Control Chamaeleo Tail Loop MK2, a programmable guitar effects loop switcher with 5 loops, buffer, and intuitive controls.
	Manuel d'utilisation de la boucle noire One Control Minimal Series avec buffer BJF Manuel d'utilisation du One Control Minimal Series Black Loop avec BJF Buffer, détaillant ses caractéristiques en tant que commutateur de boucle et tampon polyvalent, ses spécifications et son guide d'utilisation.
	Manuel d'utilisation du sélecteur d'entrée MIDI One Control Minimal Series User manual for the One Control Minimal Series MIDI Input Selector, detailing its features, operation modes, MIDI control, and specifications. Learn about its compact design and versatile functionality for guitarists and synthesists.
	Manuel d'utilisation de la boucle de queue de crocodile One Control Guide d'utilisation du One Control Crocodile Tail Loop, un commutateur de pédale programmable phare avec des capacités MIDI et un tampon BJF intégré.
	One Control Caiman Tail Loop User Manual User manual for the One Control Caiman Tail Loop, a 150 preset MIDI 5PC/CC with Tap Tempo Switcher. Details features, front and rear panel descriptions, PGM hierarchy, footswitch and MIDI settings, initialization setup, and specifications.

One Control Minimal AB Box