Robinet de lavabo de salle de bain Project Source chromé à 2 poignées, entraxe de 10 cm (4 po), certifié WaterSense (bonde incluse) - Manuel d'instructions

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Project Source Chrome 2-Handle 4-in Centerset WaterSense Bathroom Sink Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.

Produit terminéview

The Project Source Chrome 2-Handle 4-in Centerset WaterSense Bathroom Sink Faucet is designed for both home and RV use, offering a modern aesthetic with practical features.

Caractéristiques principales :

• Home and RV Compatible
• 3-hole Deck Mount Installation on 4-in center
• Meets WaterSense criteria to conserve water without sacrificing performance, with a max flow rate of 1.2-GPM
• Sleek low arc spout allows plenty of sink space
• Easy Installation with Drop and Lock Drain

Figure 1 : Devant view of the Project Source Chrome 2-Handle Bathroom Sink Faucet, showcasing its polished chrome finish and modern design.

Figure 2 : The Project Source Chrome Faucet installed on a white bathroom vanity, highlighting its compact and elegant profile.

Figure 3 : Côté view of the Project Source Chrome Faucet, demonstrating the clearance provided by its low arc spout above the sink basin.

Configuration et installation

This faucet is designed for 3-hole deck mount installation on 4-inch centers. The included Drop and Lock Drain simplifies the installation process.

Installation Steps for Drop & Lock Drain:

1. Drop & Lock: Insert the drain assembly into the sink drain hole.
2. Verrouillage: Secure the drain from underneath the sink by tightening the locking mechanism.
3. Régler: Make any necessary adjustments to ensure a proper seal and alignment.

Figure 4 : Visual guide for the 'Drop & Lock' drain installation, illustrating the three simple steps for quick setup.

For detailed faucet body installation, refer to the separate installation guide provided with your product packaging.

Mode d'emploi

The Project Source faucet features a two-handle design for precise control over water temperature and flow.

Contrôle du débit et de la température de l'eau :

• The left handle controls the hot water supply. Turn the handle counter-clockwise to increase hot water flow.
• The right handle controls the cold water supply. Turn the handle counter-clockwise to increase cold water flow.
• Réglez les deux poignées simultanément pour obtenir la température et le débit d'eau souhaités.
• To turn off the water, rotate both handles clockwise until the flow stops completely.

Entretien

Regular cleaning and maintenance will help preserve the finish and functionality of your Project Source faucet.

Nettoyage du robinet :

• Nettoyez la finition chromée avec un chiffon doux et sec.amp tissu.
• Utilisez de l'eau et du savon doux si nécessaire. Évitez les nettoyants abrasifs, les produits chimiques agressifs et les tampons à récurer, car ils peuvent endommager la finition.
• Wipe dry with a soft cloth to prevent water spots and maintain shine.

Entretien de l'aérateur :

• Si le débit d'eau diminue ou devient irrégulier, l'aérateur est peut-être obstrué.
• Carefully unscrew the aerator from the end of the spout.
• Rincez la grille de l'aérateur sous l'eau courante pour éliminer tout débris.
• Remontez l'aérateur et revissez-le sur le bec.

Dépannage

Si vous rencontrez des problèmes avec votre robinet, consultez les conseils de dépannage courants suivants :

• Faible débit d'eau : Vérifiez si l'aérateur est obstrué (voir la section Entretien). Assurez-vous que les vannes d'arrivée d'eau sont complètement ouvertes.
• Fuite au niveau du bec : Turn off water supply. Check for loose connections or worn washers/gaskets within the faucet body. Consult a professional plumber if the issue persists.
• Leaking from Handles: Tighten handle screws. If leaking continues, the cartridge may need replacement.
• Pas d'eau chaude/froide : Verify that the hot/cold water supply lines are connected correctly and the corresponding shut-off valves are open.

For more complex issues or if troubleshooting steps do not resolve the problem, contact Project Source customer support or a qualified plumber.

Caractéristiques

Garantie et assistance

Project Source products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product packaging or visit the official Project Source website. For technical support, replacement parts, or any other inquiries, please contact Project Source customer service.