Introduction
This manual provides essential information for the proper use, setup, and maintenance of your Directed Electronics 7111L 1-Button Replacement Remote. The 7111L remote is designed to work with specific Avital models, including 4003, 4111, 4113, and 24921, when paired with an Avital control module. It features DEI's Super Code Hopping technology for enhanced security.
Image: Directed Electronics 7111L 1-Button Remote Control. This image displays the black, oval-shaped remote control with a single large button and the 'Avital' logo at the bottom. A metal key ring is attached to the bottom.
Caractéristiques du produit
- Modèle: 7111L 1-Button Replacement Remote.
- Compatibilité: Works with Avital models 4003, 4111, 4113, and 24921 with an Avital control module.
- Sécurité: Incorporates DEI's exclusive Super Code Hopping protection against code grabbers, featuring 2/66 (18 quintillion) rolling codes.
- Indicateur: Equipped with a green LED for operational feedback.
- Conception: Slim, ergonomic black design.
Configuration et programmation
The Directed Electronics 7111L remote requires programming to function with your vehicle's Avital security or remote start system. Specific programming instructions are typically included with the remote control upon purchase. It is crucial to follow these instructions carefully.
General Programming Guidance:
- Veuillez vous référer aux instructions incluses : Always prioritize the programming guide provided with your 7111L remote.
- Locate Valet Button: Many Avital systems utilize a 'Valet' button for programming. This button is usually located on the control module or dashboard.
- Cycle d'allumage : Programming often involves a specific sequence of turning the vehicle's ignition on and off.
- Button Press Sequence: A series of presses on the remote's button and/or the system's Valet button will be required to enter programming mode and register the new remote.
- Assistance professionnelle : If you encounter difficulties or prefer professional installation, it is recommended to contact an authorized Directed Electronics or Avital dealer/installer. They possess the necessary tools and expertise for proper system integration.
Mode d'emploi
The 7111L is a 1-button remote control. Its primary function is to arm/disarm your security system or activate your remote start feature, depending on how your Avital system is configured and programmed.
- Presse simple : Typically, a single press of the button will activate the primary function (e.g., arm/lock or remote start).
- Appuyez et maintenez : Holding the button for a few seconds may activate a secondary function (e.g., remote start if a single press is for arming, or panic mode).
- LED verte: Observe the green LED on the remote. It will illuminate to indicate that a signal is being transmitted.
Refer to your specific Avital system's user manual for detailed information on how the 1-button remote interacts with its various features.
Entretien
- Remplacement de la batterie : The remote requires 1 Lithium Metal battery. When the remote's range decreases significantly or the LED indicator becomes dim, it is time to replace the battery. Open the remote casing carefully, replace the old battery with a new one of the same type, ensuring correct polarity.
- Nettoyage: Clean the remote with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Stockage: Rangez la télécommande dans un endroit sec, à l'abri des températures extrêmes et de la lumière directe du soleil.
- Éviter les dommages : Protect the remote from drops, impacts, and exposure to water or excessive moisture.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La télécommande ne répond pas | Batterie morte ou faible | Replace the Lithium Metal battery. |
| La télécommande ne répond pas | Remote is not programmed to the system | Follow the programming instructions included with the remote or consult a professional installer. |
| Plage de fonctionnement réduite | Batterie faible | Replace the Lithium Metal battery. |
| Plage de fonctionnement réduite | Interférence environnementale | Move closer to the vehicle or away from sources of electronic interference. |
| Green LED does not light up | Batterie morte | Replace the Lithium Metal battery. |
Caractéristiques
- Numéro de modèle : 7111L
- Marque: Réalisé
- Dimensions du produit : 5 x 3 x 0.5 pouces
- Poids de l'article : 0.317 onces
- Exigences relatives à la batterie : 1 pile au lithium métal (obligatoire)
- Couleur: Noir
- Dossier spécial : Conception ergonomique
- Nombre maximal d'appareils pris en charge : 1
- Appareils compatibles : Car Alarm System (specifically Avital models 4003, 4111, 4113, 24921 with Avital control module)
Garantie et assistance
For warranty information, technical support, or service inquiries regarding your Directed Electronics 7111L remote control, please contact the manufacturer, Directed, or an authorized dealer. Specific warranty terms and conditions may apply.
Important Note on Returns: Please be aware that returns may be subject to a restocking fee. Items must be unopened and in original packaging if received in such condition. The buyer is typically responsible for shipping costs associated with returns or exchanges.