Manuels+

AEG 005070

AEG 005070 Auto Diagnostic Tool User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective use of your AEG 005070 Auto Diagnostic Tool. This device is designed to read and clear diagnostic trouble codes (DTCs) from your vehicle's On-Board Diagnostics II (OBD-II) system, helping you identify and resolve potential issues. Please read this manual thoroughly before operating the device and keep it for future reference.

Consignes de sécurité

Respectez toujours les consignes de sécurité suivantes afin d'éviter les blessures ou les dommages à l'appareil ou au véhicule :

  • Do not attempt to disassemble or modify the diagnostic tool.
  • Ensure the vehicle's ignition is off before connecting or disconnecting the tool.
  • N’utilisez pas cet outil en conduisant.
  • Keep the tool away from water, extreme temperatures, and direct sunlight.
  • Utilisez uniquement les accessoires fournis.

Contenu du colis

Vérifiez que tous les éléments sont présents dans votre colis :

  • AEG 005070 Auto Diagnostic Tool
  • Câble de connexion OBD-II
  • Software CD (for error code lookup)
  • Étui de rangement
  • Manuel d'utilisation
AEG 005070 Auto Diagnostic Tool packaging showing the device, OBD-II cable, and software CD.
Figure 1: Contents of the AEG 005070 Auto Diagnostic Tool package, including the main unit, OBD-II cable, and software CD.

Produit terminéview

The AEG 005070 diagnostic tool features a compact design with an integrated OBD-II cable for direct connection to your vehicle. It includes a display screen for showing diagnostic information and buttons for navigation and function selection.

Close-up of the AEG 005070 Auto Diagnostic Tool showing its display and buttons.
Figure 2 : Face avant view of the AEG 005070 diagnostic tool, highlighting the display, 'LIRE/READ' button, and 'EFFACER/ERASE' button.

Composants clés :

  • Écran d'affichage : Shows diagnostic codes, status, and menu options.
  • Connecteur OBD-II : Standard 16-pin connector for vehicle interface.
  • "LIRE / READ" Button: Initiates the scanning process to read diagnostic trouble codes.
  • "EFFACER / ERASE" Button: Clears stored diagnostic trouble codes from the vehicle's ECU.

Installation

  1. Localisez le port OBD-II : The OBD-II port is typically located under the dashboard on the driver's side, though its exact position may vary by vehicle model. Consult your vehicle's owner's manual if you cannot find it.
  2. Assurez-vous que le véhicule est éteint : Turn off the vehicle's ignition completely.
  3. Connectez l'outil : Plug the OBD-II connector of the diagnostic tool firmly into the vehicle's OBD-II port.
  4. Mettre le contact : Turn the vehicle's ignition to the "ON" position (do not start the engine). The diagnostic tool should power on automatically.

Mode d'emploi

Lecture des codes de diagnostic d'anomalie (DTC) :

  1. After connecting the tool and turning on the ignition, the device will display "SCAN..." indicating it is establishing communication with the vehicle.
  2. Once communication is established, press the "LIRE / READ" bouton.
  3. The tool will display any detected DTCs. Each code is a specific identifier for a vehicle problem.
  4. Refer to the included software CD or an online OBD-II code database to understand the meaning of each code.

Effacement des codes d'anomalie de diagnostic (DTC) :

Avertissement: Clearing DTCs will erase all diagnostic information from the vehicle's computer. Only clear codes after addressing the underlying issue, as they may reappear if the problem persists.

  1. Assurez-vous que le contact est mis (moteur éteint).
  2. Appuyez sur le "EFFACER / ERASE" bouton.
  3. Confirm the action if prompted by the device.
  4. The tool will indicate when the codes have been successfully cleared.

Entretien

  • Nettoyage: Essuyez l'appareil avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs ni de solvants.
  • Stockage: Store the tool in its provided storage case in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Entretien des câbles : Avoid bending or twisting the OBD-II cable excessively to prevent internal damage.

Dépannage

ProblèmeCause possibleSolution
L'outil ne s'allume pas.Connexion desserrée ; contact du véhicule coupé ; port OBD-II défectueux.Ensure the OBD-II connector is fully seated. Turn vehicle ignition to "ON". Test on another vehicle if possible.
Message « Erreur de lien » ou « Erreur de communication ».Vehicle not OBD-II compliant; Loose connection; Vehicle's ECU issue.Verify vehicle is OBD-II compliant (most vehicles from 2000 for petrol, 2003 for diesel). Reconnect the tool. Check vehicle's battery.
Impossible d'effacer les codes.Engine running; Underlying fault still present.Ensure engine is off, ignition is "ON". Codes cannot be cleared if the underlying issue has not been resolved.

Caractéristiques

  • Modèle: AEG 005070
  • Source d'alimentation : Powered by vehicle's OBD-II port.
  • Compatibilité: OBD-II compliant vehicles (petrol from 2000, diesel from 2003).
  • Poids: Approximately 558 g (0.558 kg)
  • Dimensions: Approximately 27.8 x 20.2 x 5.9 cm (Package dimensions)

Garantie et assistance

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact AEG customer service. Keep your proof of purchase for warranty claims.

You can visit the official AEG website pour des ressources supplémentaires et des informations de contact : www.aeg.com