Introduction
Thank you for choosing the CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new water dispenser. Please read all instructions carefully before use and retain this manual for future reference.
Informations importantes sur la sécurité
Respectez toujours les consignes de sécurité de base lors de l'utilisation d'appareils électriques afin de réduire les risques d'incendie, d'électrocution et de blessures.
- This appliance is equipped with patented child safety hot water protection to prevent burn accidents.
- Assurez-vous que l'appareil est placé sur une surface stable et plane.
- N’utilisez pas le distributeur si le cordon ou la fiche est endommagé(e).
- Keep the dispenser at least 4 inches from walls to allow for proper air circulation.
- Ne plongez pas le distributeur, le cordon ou la prise dans l'eau ou tout autre liquide.
- Débranchez le distributeur avant de le nettoyer ou d'effectuer toute opération de maintenance.
Contenu du colis
Your CLOVER D1-K water cooler package includes:
- CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler Unit
- 2H-L Filter Cartridge
- Matériel d'installation
- Ligne d'eau
- Manuel d'instructions
Caractéristiques
| Modèle | D1-K |
| Type de produit | Hot and Cold Countertop Bottleless Water Dispenser |
| Dimensions du produit | 10.7 po L x 16.8 po P x 17.2 po H |
| Poids du produit | Net: 26 lbs, Gross: 31 lbs |
| Couleur du produit | Noir et argent |
| Électrique | Prise 110V |
| Type de réfrigérant | R134a |
| Type de compresseur | LG |
| Certifications | UL |
| Température de l'eau | Chaud et froid |
| Cold Water Rate | 0.6 GAL of 50°F/HR |
| Hot Water Rate | 1.8 GAL of 185°F/HR |
| Cold Water Thermostat | Réglable de 32°F à 50°F |
| Thermostat d'eau chaude | Controlled to 185°F |
| Système de filtration intégré | Oui |
| Durée de vie du filtre | 750 gallons ou 12 mois |
| Certifié Energy Star | Oui |
Installation
1. Placement
Place the water cooler on a flat, stable countertop. Ensure there is at least 4 inches of clearance from walls to allow for proper ventilation and efficient operation. The unit dimensions are 10.7"W x 16.8"D x 17.2"H, designed to fit under standard cabinets.
2. Raccordement de la conduite d'eau
This bottleless water cooler connects directly to your existing plumbing. The package includes all necessary installation hardware and water line for a basic setup. Follow the detailed instructions provided with the installation kit to connect the water line to a cold water source.
3. Initial System Flush
Before first use, it is crucial to flush the system to remove any air or carbon fines from the new filter. Once the water line is connected and the water supply is turned on, dispense several cups of water from both the hot and cold faucets until the water runs clear and free of air bubbles. This ensures optimal water quality and taste.
Mode d'emploi
1. Distribution d'eau
The CLOVER D1-K features easy-to-use push faucets for dispensing water. The unit provides both hot and cold water.
- Eau froide : Press the cold water faucet to dispense chilled water (32°F to 50°F).
- Eau chaude: To dispense hot water (185°F), you must first engage the child safety hot water protection by sliding the safety lock, then press the hot water faucet. This prevents accidental dispensing of hot water.
2. Fast Fill Rate
The dispenser offers a fast fill rate, capable of dispensing 16 oz in under 8 seconds. The deep fill area accommodates large sport bottles and containers.
Entretien
1. Nettoyage
The CLOVER D1-K water dispenser requires minimal maintenance. The removable drip tray is made of ABS plastic and is dishwasher safe for easy cleaning. Regularly wipe down the exterior with a soft, damp tissu.
2. Remplacement du filtre
The built-in filtration system ensures clean, fresh water. The filter cartridge (2H-L) has a life of approximately 750 gallons or 12 months, whichever comes first. Refer to the filter replacement instructions provided with your replacement filter for detailed steps.
Dépannage
If you experience issues with your CLOVER D1-K water cooler, please consult the following common problems and solutions:
- Pas de distribution d'eau : Check if the water supply line is properly connected and the shut-off valve is open. Ensure the unit is plugged into a working electrical outlet.
- Water Not Hot/Cold Enough: Verify that the hot and cold water switches on the back of the unit are turned ON. Allow sufficient time for the unit to reach desired temperatures after initial setup or power cycling.
- Fuite : Check all water line connections for tightness. Ensure the filter cartridge is correctly installed. The unit has a Dual Float with Emergency Shut Off System to prevent leakage.
- Bruit inhabituel : Some operational noise from the compressor is normal. If the noise is excessive or unusual, ensure the unit is level and not touching any walls or objects.
Garantie
The CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler comes with a Garantie de 1 ans sur les pièces et un Garantie de 3 ans sur le compresseur from the date of purchase. Please retain your proof of purchase for warranty claims. This warranty covers defects in materials and workmanship under normal use.
Soutien
For further assistance, technical support, or to inquire about replacement parts, please contact CLOVER customer service. Refer to the contact information provided on the product packaging or the official CLOVER website.
