Manuel d'utilisation du support de coffre UHF Browning BR1020

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Browning BR1020 -UHF Trunk Mount. This product is designed to securely attach an antenna to a vehicle's trunk lid or similar surface, providing a stable platform for communication equipment. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Informations importantes sur la sécurité

AVERTISSEMENT: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please refer to the manufacturer's official website ou contacter le support client.

• Always ensure proper grounding during installation to prevent electrical hazards.
• Do not overtighten mounting screws, as this may damage the vehicle surface or the mount.
• Verify that the antenna and mount are securely fastened before driving.

3. Contenu du colis

The Browning BR1020 -UHF Trunk Mount package typically includes the following components:

• Browning BR1020 -UHF Trunk Mount assembly
• Coaxial cable (integrated)
• Matériel de montage (vis, rondelles)

Note: Antenna is sold separately.

4. Configuration et installation

Follow these steps to properly install your Browning BR1020 -UHF Trunk Mount:

1. Sélectionnez l'emplacement de montage : Choose a suitable location on your vehicle's trunk lid or hood lip. Ensure the surface is clean and free of obstructions. The mount is designed to fit surfaces up to 3/8" (10mm) thick.
2. Préparez la surface : If necessary, gently clean the mounting area to ensure good electrical contact for grounding. For painted surfaces, it may be necessary to lightly abrade the paint under the mounting screws to ensure a solid ground connection.
3. Fixer le support : Position the stainless steel bracket onto the chosen edge. Secure the mount using the provided screws. Ensure the mount is firm and does not wobble. Do not overtighten.
4. Connectez l'antenne : The mount features a chrome-plated solid brass NMO (New Motorola) connector with a gold contact pin. Carefully screw your NMO-compatible antenna onto the NMO connector until it is finger-tight. Do not use tools to overtighten the antenna.
5. Passage du câble coaxial : Carefully route the integrated coaxial cable from the mount into the vehicle's interior. Ensure the cable is not pinched, kinked, or exposed to sharp edges that could damage the insulation. Use cable ties or clips to secure the cable along its path.
6. Se connecter à la radio : Connect the other end of the coaxial cable to your radio or communication device.

Figure 4.1: The Browning BR1020 -UHF Trunk Mount, illustrating the NMO connector for antenna attachment, the robust stainless steel bracket for secure vehicle mounting, and the integrated coaxial cable for signal transmission.

5. Mode d'emploi

Once the Browning BR1020 -UHF Trunk Mount and antenna are securely installed and connected to your radio, operation is straightforward:

• Ensure all connections (mount to vehicle, antenna to mount, cable to radio) are tight and secure.
• Perform a Standing Wave Ratio (SWR) check on your antenna system to ensure optimal performance and prevent damage to your radio. Refer to your radio's manual for SWR measurement procedures.
• Operate your radio according to its manufacturer's instructions.

6. Entretien et maintenance

To ensure the longevity and optimal performance of your Browning BR1020 -UHF Trunk Mount, follow these maintenance guidelines:

• Inspection régulière : Periodically check the mount for any signs of wear, corrosion, or loosening of screws.
• Nettoyage: Clean the mount and NMO connector with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or materials.
• Intégrité de la connexion : Ensure the antenna connection to the NMO mount remains clean and free of debris. A poor connection can lead to signal loss or increased SWR.
• Inspection des câbles : Regularly inspect the coaxial cable for any cuts, kinks, or damage to the outer jacket. Replace if damage is found.

7. Dépannage

If you encounter issues with your Browning BR1020 -UHF Trunk Mount, consider the following:

• Poor Signal / High SWR:
  • Check all connections: ensure the antenna is tightly screwed onto the NMO mount, and the coaxial cable is securely connected to the radio.
  • Verify proper grounding: ensure the mount has a good electrical connection to the vehicle's chassis. Lightly abrading paint under mounting screws may be necessary.
  • Vérifiez que le câble coaxial n'est pas endommagé.
  • Ensure the antenna itself is tuned correctly for the operating frequency.
• Montage lâche :
  • Tighten the mounting screws, but do not overtighten.
  • Ensure the mounting surface is appropriate and provides sufficient grip.

8. Spécifications du produit

9. Garantie et assistance

For specific warranty information and customer support, please contact the manufacturer directly. Warranty details are subject to change and may vary by region.

You can visit the official Browning store for more product information: Browning Store