1. Introduction
Thank you for choosing the Kapego Ultra 70 Dimmable LED Power Supply. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your device. Please read this manual thoroughly before installation and keep it for future reference.
1.1 Avertissements de sécurité
- Risque électrique : L'installation et l'entretien doivent être effectués par un électricien qualifié, conformément aux codes et réglementations électriques locaux.
- Coupez l'alimentation avant toute installation, maintenance ou dépannage.
- Ne faites pas fonctionner l'appareil s'il est endommagé.
- Assurer une ventilation adéquate pour éviter la surchauffe.
- This device is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not expose to moisture or water.
2. Produit terminéview
The Kapego Ultra 70 is a constant voltage electronic transformer designed for dimmable LED lighting applications. It features phase-cut dimming control, allowing for smooth adjustment of light intensity when paired with compatible dimmers.
2.1 Principales caractéristiques
- Matériel: Durable plastic housing.
- Couleur: Finition noire.
- Puissance de sortie : 0-70.00W, suitable for various LED loads.
- Contrôle: Phase-cut dimming for compatibility with leading and trailing edge dimmers.
- Vol d'entréetage: 220-240V AC, 50-60Hz.
- Volume de sortietage: 12V CA.
2.2 Image du produit
3. Configuration et installation
Important: All installation work must be carried out by a qualified electrician. Ensure power is disconnected at the main circuit breaker before proceeding.
- Coupure de courant : Turn off the main power supply to the circuit where the power supply will be installed. Verify that the power is off using a voltage testeur.
- Montage: Choose a suitable, dry location for mounting the power supply, ensuring adequate ventilation. The device is not waterproof (IP20). Secure the power supply using appropriate fasteners.
- Input Wiring (PRI): Connect the main AC power supply (220-240V AC, 50-60Hz) to the input terminals marked 'PRI' (L and N). Use appropriate wire gauges (0.75-2.50 mm² recommended).
- Connect the Live (L) wire to the 'L' terminal.
- Connect the Neutral (N) wire to the 'N' terminal.
- Output Wiring (SEC): Connect your 12V AC LED lighting fixtures to the output terminals marked 'SEC'. Ensure the total wattage of the connected LED fixtures does not exceed 70W. Use appropriate wire gauges (0.75-2.50 mm² recommended).
- Dimmer Connection (Optional): If using a dimmer, connect it on the primary (input) side of the power supply, following the dimmer manufacturer's instructions. This power supply is designed for phase-cut dimmers.
- Vérification finale : Double-check all connections for proper polarity and secure fastening. Ensure no bare wires are exposed.
- Restauration de puissance : Rétablissez l'alimentation du circuit.
4. Mode d'emploi
Once properly installed, the Kapego Ultra 70 Dimmable LED Power Supply operates automatically when power is supplied. If a compatible phase-cut dimmer is connected to the input, you can adjust the brightness of the connected LED lights using the dimmer control.
- Marche/Arrêt : Use the main light switch or dimmer switch to turn the connected LED lights on or off.
- Atténuation: Rotate or adjust the dimmer control to increase or decrease the light output. Ensure the dimmer is compatible with phase-cut electronic transformers.
5. Entretien
The Kapego Ultra 70 Dimmable LED Power Supply requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:
- Nettoyage: Ensure power is disconnected before cleaning. Wipe the exterior of the power supply with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids.
- Inspection: Periodically inspect the wiring and connections for any signs of damage, loose connections, or overheating. Address any issues promptly.
- Ventilation: Ensure that the power supply's ventilation openings are not obstructed.
6. Dépannage
If you experience issues with your Kapego Ultra 70 Dimmable LED Power Supply, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Pas de sortie lumineuse |
|
|
| Lumière vacillante ou instable |
|
|
| La gradation ne fonctionne pas |
|
|
Si le problème persiste après avoir essayé ces solutions, veuillez contacter un électricien qualifié ou le service clientèle.
7. Spécifications
| Paramètre | Valeur |
|---|---|
| Numéro de modèle | 180515 |
| Marque | Deko-Light (Kapego) |
| Vol d'entréetage | 220 à 240 V CA, 50 à 60 Hz |
| Courant d'entrée | 0.29A (PRI) |
| Volume de sortietage | 12V AC (SEC: 11.5V~eff) |
| Courant de sortie | 0-6.0A |
| Puissance de sortie | 0-70.00W |
| Contrôle de gradation | Phase Cut (Leading/Trailing Edge) |
| Facteur de puissance (λ) | ≥0.99 |
| Matériel | Plastique |
| Couleur | Noir |
| Indice de protection IP | IP20 (pas de protection contre l'eau) |
| Operating Temperature (ta) | 50°C |
| Température du boîtier (tc) | 80°C |
| Dimensions du produit (L x l x H) | 115 mm x 45 mm x 28 mm (4.53 x 1.77 x 1.10 pouces) |
| Poids | 120 grammes |
| Section transversale du fil | 0.75-2.50 mm² |
8. Garantie et assistance
This Kapego product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.
8.1 Assistance clientèle
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the packaging or the manufacturer's website pour les coordonnées.
Fabricant: Kapego (Deko-Light)
Modèle: 180515
