Produit terminéview
The Artograph Prism Art Projector is a high-quality, single lens, tabletop opaque projector designed for convenient projection of various art forms, including artwork, designs, patterns, prints, and line drawings, onto a vertical surface. Its reversible lens allows for a wide projection range, from 80% reduction up to 20 times enlargement, providing full-color reproduction. The projector features 500-Watts of photo-quality lighting (two 250-Watt bulbs) for a bright and clear image. The 7" x 7" (178 x 178 mm) top-loading area simplifies the placement of your original material. Magnetic door latches and a spring clip ensure your original stays flat and secure during projection. For optimal performance and to prevent overheating, the unit is fan-cooled and includes thermal overload circuit protection. A darkened room is required for maximum visibility and projection clarity.
Image : Avant view of the Artograph Prism Art Projector, showcasing son design compact et son objectif.
Contenu du colis
Lors du déballage, veuillez vérifier que tous les composants suivants sont présents :
- Artograph Prism Art Projector Unit
- Two (2) 250-Watt Photo-Quality Bulbs
- Objectif 20X
- Cordon d'alimentation
Installation
- Déballage: Retirez soigneusement tous les composants de l'emballage. Conservez l'emballage pour un stockage ou un transport ultérieur.
- Placement: Place the projector on a stable, flat surface. Ensure there is adequate space for projection onto a vertical surface (wall or easel). A darkened room is essential for optimal projection quality.
Image: A user setting up the Artograph Prism Art Projector next to an easel, demonstrating typical usage.
- Installation de l'objectif : The 20X lens is reversible. Insert the lens into the projector's front opening. The orientation of the lens affects the projection range (reduction or enlargement).
Image : Gros plan view of the projector's lens, highlighting its design.
- Connexion électrique : Connect the power cord to the projector's power inlet and then to a standard electrical outlet.
Image : Arrière view of the projector, showing the power cord connection point and cooling fan.
Mode d'emploi
- Mise sous tension : Locate the power switch on the side of the projector and turn it to the 'ON' position.
Image : Côté view of the projector, highlighting the power switch location.
- Loading Original: Open the top-loading area. Place your artwork, design, or image face down onto the 7" x 7" glass-covered copy area. Use the magnetic door latches and spring clip to hold the original flat and secure.
Image: The top-loading area of the projector shown open, ready for placing original artwork.
- Projection: The image from your original will be projected onto the vertical surface.
Image: The projector in operation, displaying a clear image of a flower on a wall.
- Réglage de la taille : Move the projector closer to the projection surface to reduce the image size (up to 80% reduction). Move it further away to enlarge the image (up to 20 times enlargement).
- Mise au point : Adjust the lens to achieve a sharp, clear image on the projection surface.
- Vertical Projection (with accessories): For tabletop projection, optional accessories are available to allow for vertical projection of 80% reduction and up to 4x enlargement.
Vidéo : Un overview of the Artograph Prism Art Projector's features, including lens reversibility, top-loading area, and fan-cooled operation. This video demonstrates the product's capabilities and key components.
Entretien
- Nettoyage: Regularly wipe the exterior of the projector with a soft, dry cloth. For the glass copy area and lens, use a lens cleaning cloth and appropriate cleaning solution to avoid scratches.
- Remplacement de l'ampoule : The 500-Watt photo-quality bulbs have an estimated lifespan of 20 hours. When a bulb needs replacement, ensure the projector is unplugged and cooled down. Refer to the bulb replacement diagram in the original user guide (PDF link provided in product details) for detailed instructions.
- Stockage: When not in use, store the projector in a cool, dry place, preferably in its original packaging, to protect it from dust and damage.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| No image projected / Projector not turning on |
|
|
| Projected image is dim or unclear |
|
|
| Original artwork not staying flat |
|
|
Caractéristiques
| Numéro de modèle | 25090 |
| Marque | Artograph |
| Dimensions du produit | 17.5 x 17.2 x 10.2 pouces |
| Poids de l'article | 11 livres |
| Fabricant | Artograph Original Prism |
| Éclairage | 500 Watts (2 x 250-Watt photo lamps) |
| Zone de copie | 7" x 7" (178 x 178 mm) top-loading |
| Agrandissement/Réduction | 80% reduction up to 20 times enlargement |
| Lentille | Reversible 20X lens |
| Refroidissement | Fan cooled with thermal overload circuit protection |
| Dossier spécial | Portable, Electronic |
| Technologie de connectivité | VGA (as per product specifications, though typically not applicable to opaque projectors) |
| Résolution d'affichage | 500W (as per product specifications) |
| Résolution d'affichage maximale | 3840 x 2160 (as per product specifications, though typically not applicable to opaque projectors) |
Garantie et assistance
The Artograph Prism Art Projector comes with a Garantie de 1 ans from the date of purchase. Additionally, Artograph provides Assistance technique à vie pour ce produit.
For warranty claims, technical assistance, or further inquiries, please contact Artograph customer service. Refer to the official Artograph website or the original product packaging for contact details.
Un guide d'utilisation détaillé au format PDF est également disponible en téléchargement : Artograph Prism Projector User Guide (PDF)