SeKi Easy Plus Universal Learning Remote Control (Model 311154)

Introduction

The SeKi Easy Plus remote control is designed for simplicity and ease of use, making it ideal for seniors, children, and individuals who prefer a straightforward control experience. This universal learning remote can replace any infrared remote control, allowing you to consolidate multiple remotes into one. Its large, freely assignable buttons ensure comfortable operation, and all programmed settings are retained even when changing batteries.

Caractéristiques du produit

• Universal Learning Function: Capable of learning commands from any existing infrared remote control.
• Replaces Multiple Remotes: Consolidate control for your TV and other IR devices.
• Freely Assignable Keys: Customize button functions to your preference.
• Large, Easy-to-Use Buttons: Designed for enhanced visibility and tactile feedback.
• Conservation de la mémoire : Programmed settings are saved even after battery replacement.
• Appareils compatibles : Primarily designed for televisions, but can learn from other IR devices.
• Technologie de connectivité: Infrared (IR).
• Nombre de boutons : 20.
• Portée maximale : Jusqu'à 10 mètres.

Contenu du colis

The SeKi Easy Plus remote control package includes:

• 1x SeKi Easy Plus Universal Learning Remote Control (Silver-Black)
• Manuel de l'utilisateur (ce document)

Note: 2x AAA batteries are required for operation and are not included in the package.

Image: SeKi Easy Plus remote control in its retail packaging, showing the silver-black design and large buttons.

Installation

1. Installation de la batterie

1. Locate the battery compartment on the back of the SeKi Easy Plus remote control.
2. Faites glisser le couvercle du compartiment à piles pour l'ouvrir.
3. Insérez deux (2) piles AAA, en veillant à respecter la polarité (+ et -) comme indiqué à l'intérieur du compartiment.
4. Fermez soigneusement le couvercle du compartiment à piles.

Image : Arrière view of the SeKi Easy Plus remote control with the battery cover removed, showing the empty battery slots.

Image : Gros plan view of the battery compartment, clearly indicating the requirement for AAA batteries and their correct orientation.

2. Mise sous tension initiale

After installing the batteries, the remote is ready for programming. There is no separate power-on button; the remote will activate when a button is pressed.

Operating Instructions: Learning Function

The SeKi Easy Plus remote control learns commands directly from your original remote. Follow these steps carefully to program each button:

1. Préparer les télécommandes : Place the SeKi Easy Plus remote and your original remote control on a flat surface, facing each other, with their infrared emitters aligned and approximately 1-3 cm apart. Ensure both remotes have fresh batteries.
2. Entrez en mode d'apprentissage : Appuyez et maintenez enfoncé le TV Power (red button) et AV buttons simultaneously on the SeKi Easy Plus remote for approximately 3 seconds until the red LED indicator light stays on continuously. This indicates the remote is in learning mode.
3. Sélectionnez le bouton à programmer : On the SeKi Easy Plus remote, press the button you wish to program (e.g., Volume Up '+'). The red LED will start blinking slowly.
4. Transmettre la commande : On your original remote control, press and hold the corresponding button (e.g., Volume Up) until the red LED on the SeKi Easy Plus remote blinks rapidly three times and then stays on continuously. This confirms the command has been learned successfully.
5. Programmer plus de boutons : Repeat steps 3 and 4 for all other buttons you wish to program (e.g., Volume Down '-', Channel Up '^', Channel Down 'v', Mute, Number buttons, etc.).
6. Quitter le mode d'apprentissage : Une fois tous les boutons souhaités programmés, appuyez sur TV Power (red button) et AV buttons simultaneously again, or wait for approximately 10 seconds without any input. The red LED will turn off, indicating that the remote has exited learning mode and saved the settings.

Remarques importantes :

• Perform the programming steps promptly. If there is a long pause between button presses during learning mode, the remote may exit learning mode automatically.
• Ensure a clear line of sight between the two remotes during the learning process.
• If a button does not learn correctly, repeat the process for that specific button.

Image: Technical diagram illustrating the dimensions and button layout of the SeKi Easy Plus remote control, highlighting the large button design.

Image : Côté profile of the SeKi Easy Plus remote control, showcasing its ergonomic design and slim form factor.

Entretien

Remplacement de la batterie

When the remote's performance degrades or the LED indicator light does not respond, it's time to replace the batteries. Follow the battery installation steps in the "Setup" section. The SeKi Easy Plus remote retains its programmed settings even when batteries are removed, so reprogramming is not necessary after replacement.

Nettoyage

Pour nettoyer la télécommande, utilisez un chiffon doux et sec. Pour les saletés tenaces, frottez-la légèrement avec un chiffon doux et sec.ampNettoyez le chiffon avec de l'eau ou une solution nettoyante douce. N'utilisez pas de nettoyants abrasifs et n'immergez pas la télécommande dans l'eau.

Dépannage

• La télécommande ne répond pas :
  • Check if the batteries are correctly inserted and have sufficient charge. Replace with fresh AAA batteries if necessary.
  • Ensure there is a clear line of sight between the remote and the device (TV).
• Buttons not working after programming:
  • The learning process might have failed for specific buttons. Repeat the "Operating Instructions: Learning Function" steps for the affected buttons.
  • Ensure the original remote's signal is strong and consistent during programming.
• Learning mode exits prematurely:
  • This can happen if there's too long a pause between steps during the learning process. Try to complete each step more quickly.
  • Ensure the original remote is transmitting a clear signal when its button is pressed.
• Device not responding to learned commands:
  • Verify that the SeKi Easy Plus remote is pointed directly at the device's IR receiver.
  • Confirm that the original remote works correctly with the device. If not, the issue might be with the device itself.

Caractéristiques

Garantie et assistance

The SeKi Easy Plus remote control comes with a Garantie de 2 ans À compter de la date d'achat. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.

For further assistance, troubleshooting tips, or to view additional product information, please visit the official SeKi website:

www.my-seki.com

Image: Back of the product packaging, detailing key features, warranty information, and the official support website.