Introduction
This manual provides essential information for the safe and effective operation of your Cen-Tech 9 Volt Metal Detector 6-inch Wand Scanner. This device is designed to locate metal objects, particularly those embedded in wood, and can also serve as a security scanning tool. Please read this manual thoroughly before use and retain it for future reference.
Image: The Cen-Tech 9 Volt Metal Detector, a black handheld wand with yellow "CEN-TECH" branding.
Consignes de sécurité
- Utilisez toujours l'appareil en toute sécurité.
- N'exposez pas l'appareil à des températures extrêmes ou à l'humidité.
- Tenir hors de portée des enfants.
- Éliminez les piles conformément aux réglementations locales.
- Do not attempt to modify or repair the device yourself. Refer to qualified service personnel.
Contenu du colis
- Cen-Tech 9 Volt Metal Detector Wand Scanner
- Étui de rangement
- Manuel de l'utilisateur (ce document)
Note: A 9V battery is required for operation and is sold separately.
Configuration : Installation de la batterie
The Cen-Tech Metal Detector requires one 9-volt battery for operation.
- Repérez le couvercle du compartiment à piles, généralement sur la poignée ou à l'arrière de l'appareil.
- Faites glisser ou déclipsez le couvercle pour ouvrir le compartiment.
- Insert a fresh 9-volt battery, ensuring the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
- Replacez soigneusement le couvercle du compartiment à piles.
- L'appareil est maintenant prêt à l'emploi.
Mode d'emploi
Mise sous/hors tension
- To turn the detector ON, slide the power switch to the "ON" position. You may hear a brief beep and see an LED light up, indicating it is active.
- To turn the detector DÉSACTIVÉ, slide the power switch to the "OFF" position.
Detecting Metal
- Hold the wand scanner by the handle and sweep the 6-inch wand head slowly and steadily over the area you wish to scan.
- When metal is detected, the device will emit an audio alarm (a distinct beeping sound) and/or activate the LED visual alert (a flashing light). The intensity of the alarm may increase as you get closer to the metal object.
- Pinpoint the exact location by narrowing your sweep area once an alarm is triggered.
Réduction de la sensibilité
- The detector features a 50% sensitivity reduction button. Press and hold this button to temporarily decrease the sensitivity of the detector. This is useful for scanning in areas with high levels of ambient metal or when trying to ignore smaller, less significant metal objects.
- Release the button to return to full sensitivity.
Alerte de batterie faible
- The device is equipped with a low battery alert. When the battery power is low, the detector's performance may diminish, and a specific indicator (e.g., a continuous low tone or a specific LED pattern) will activate.
- Replace the 9-volt battery immediately when the low battery alert is active to ensure optimal performance.
Caractéristiques
- Detects metal embedded in wood.
- May also be used as a security scan device.
- 6-inch wand for one-pass coverage.
- Audio alarm and LED visual alert.
- 50% sensitivity reduction button.
- Alerte de batterie faible.
- Comes with a handy carrying case.
Entretien
- Nettoyage: Wipe the detector with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Stockage: When not in use, store the detector in its provided carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Batterie: Retirez la batterie si l'appareil n'est pas utilisé pendant une période prolongée afin d'éviter les fuites et les dommages.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Detector does not turn on. | La batterie est déchargée ou mal installée. | Vérifiez la polarité de la pile. Remplacez-la par une pile 9V neuve. |
| Weak or inconsistent detection. | Low battery. Interference from other electronic devices. | Replace battery. Move away from other electronics. Ensure sensitivity reduction button is not pressed. |
| Constant alarm without metal present. | High ambient metal. Device too close to metal objects during power-on. | Move to an area free of metal to power on. Use the sensitivity reduction button. |
| No audio or LED alert. | Battery issue. Internal malfunction. | Check/replace battery. If problem persists, contact customer support. |
Caractéristiques
| Marque | Cen-Tech |
| Numéro de modèle | 94138 |
| Source d'énergie | Pile 9V (non incluse) |
| Type de détection | Métal |
| Wand Size | 6 pouces |
| Alertes | Audio Alarm, LED Visual Alert, Low Battery Alert |
| Caractéristiques spéciales | 50% Sensitivity Reduction Button |
| Dimensions | 16.5 x 5 x 2 pouces |
| Poids de l'article | 1.45 livres |
| Matériel | Wood, Metal (referring to detected materials) |
| Évaluation de la protection internationale | IP54 |
Garantie et assistance
Cen-Tech products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your purchase or visit the official Cen-Tech webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.
For further assistance, you may contact Cen-Tech customer service through their official channels. Always provide your product model number (94138) when seeking support.
