Avidsen 103800 Programmable Timer Socket User Manual

Introduction

This manual provides instructions for the safe and efficient use of your Avidsen 103800 Programmable Timer Socket. This device is designed to automatically control the power supply to household appliances, allowing for scheduled operation.

Consignes de sécurité

• Pour usage intérieur uniquement.
• Do not exceed the maximum load of 3500 W (16A).
• Ensure the appliance connected does not exceed the timer's power rating.
• Do not immerse in water or expose to moisture.
• Tenir hors de portée des enfants.
• Ne démontez pas et n'essayez pas de réparer l'appareil.

Produit terminéview

The Avidsen 103800 is a mechanical programmable timer socket. It features a rotating dial with segments for setting ON/OFF times.

Figure 1: Avidsen 103800 Programmable Timer Socket. This image shows the front view of the white timer socket, highlighting the central rotating dial for programming and the socket outlet.

Caractéristiques principales

• Easy to operate programmable socket.
• Minimum programming interval: 15 minutes.
• Maximum power capacity: 3500 W.
• Current rating: 16A.
• Conçu pour une utilisation en intérieur.

Installation

1. Initial Plug-in: Plug the Avidsen 103800 timer into a standard 230V, 50Hz wall socket.
2. Définir l'heure actuelle : Rotate the central dial clockwise until the arrow indicator aligns with the current time of day. The dial is marked in 24-hour format.
3. Horaires de programmation ON/OFF : The dial is divided into segments, each representing 15 minutes. Push down the segments corresponding to the times you want the connected appliance to be ON. Leave the segments up for the times you want the appliance to be OFF.
4. Connecter l'appareil : Plug the appliance you wish to control into the timer socket.
5. Sélectionnez le mode de fonctionnement : The timer typically has a switch for different modes (e.g., ON, OFF, TIMER). Set this switch to the "TIMER" position for automatic operation.

Note: The timer does not require batteries as it is mains powered.

Opérationnel

Une fois configurée, la minuterie allumera et éteindra automatiquement l'appareil connecté selon votre programmation.

Commande manuelle

If your timer has a manual override switch (often labeled ON/OFF/TIMER), you can temporarily bypass the programmed schedule:

• SUR: The appliance will remain continuously ON, ignoring the timer settings.
• OFF: The appliance will remain continuously OFF, ignoring the timer settings.
• MINUTEUR: The appliance will operate according to the programmed schedule.

Refer to the specific markings on your device for exact switch positions.

Entretien

• Nettoyage: Disconnect the timer from the wall socket before cleaning. Wipe the exterior with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• Stockage: Rangez la minuterie dans un endroit frais et sec lorsqu'elle n'est pas utilisée.
• Inspection: Periodically check the timer and its plug for any signs of damage. Do not use if damaged.

Dépannage

Caractéristiques

• Modèle: Avidsen 103800
• Taper: Programmable Mechanical Timer Socket
• Vol d'entréetage: 230V AC, 50Hz
• Charge max. : 3500 W / 16 A
• Minimum Setting Unit: 15 minutes
• Application: Utilisation en intérieur uniquement
• Couleur: Blanc
• Matériel: Plastique
• Dimensions (paquet) : 23.1 x 13.9 x 8.5 cm
• Poids (colis) : 210 g
• Code GTIN: 03660211038000

Garantie et assistance

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Avidsen webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

Fabricant: AVIDSEN

Contact: Pour obtenir de l'aide, veuillez visiter www.avidsen.com