Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Equity 31269 Atomic Projection Clock. This device automatically synchronizes with the atomic time signal, ensuring accurate timekeeping. It features time projection, an alarm with snooze, and displays indoor temperature.
Figure 1 : Face avant view of the Equity 31269 Atomic Projection Clock, showing its display and projection arm.
Installation
Installation de la batterie : Open the battery compartment located on the back of the clock. Insert one (1) AA battery, ensuring the polarity (+/-) matches the diagram inside the compartment. Close the battery compartment securely.
Mise sous tension initiale : Upon battery installation, the clock will power on and begin searching for the atomic time signal. This process may take several minutes to several hours depending on your location and signal strength.
Synchronisation temporelle atomique : The clock will automatically attempt to synchronize with the atomic time signal. Once synchronized, the time will be set accurately. Ensure the clock is placed away from large metal objects or electronic devices that may interfere with the signal reception.
Mode d'emploi
Fonctions d'affichage
The main display shows the current time, month, day, and date.
The indoor temperature is displayed, switchable between Fahrenheit (℉) and Celsius (℃). Refer to the control buttons on the back for temperature unit selection.
PM indicator illuminates when the time is in the afternoon (12-hour format).
Projection temporelle
Bras réglable : The projection arm can be adjusted to direct the time display onto a wall or ceiling.
Réglage de la mise au point : Use the focus wheel on the projection arm to sharpen the projected image.
Rotation Feature: The projected time can be rotated for optimal viewing orientation. Consult the device controls for rotation options.
Projection On/Off: The projection feature can be turned off when not desired.
Alarme et Snooze
Réglage de l'alarme : Use the dedicated alarm setting buttons (refer to the back panel for specific button labels) to set your desired alarm time. An alarm indicator will appear on the display when the alarm is active.
Fonction de répétition: When the alarm sounds, press the SNOOZE button to temporarily silence the alarm. The alarm will sound again after a short interval.
Rétroéclairage
Press the BACKLIGHT button to illuminate the display for a short period, improving visibility in low-light conditions.
Heure d'été (DST)
The clock automatically adjusts for Daylight Saving Time, eliminating the need for manual time changes.
Entretien
Remplacement de la batterie : When the display dims or the clock functions become erratic, replace the AA battery. Dispose of used batteries responsibly.
Nettoyage: Clean the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.
Conditions environnementales : Évitez d'exposer l'horloge à des températures extrêmes, à la lumière directe du soleil ou à une forte humidité, car cela pourrait affecter son fonctionnement et sa durée de vie.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Clock not displaying time or functions erratically. | Batterie faible ou morte. | Remplacez la pile AA par une neuve. |
| L'heure atomique ne se synchronise pas. | Interference from electronics or metal objects; weak signal. | Relocate the clock to an open area, away from other electronic devices or large metal structures. Allow several hours for synchronization. |
| Le calendrier prévu est flou. | La mise au point de la projection nécessite un réglage. | Adjust the focus wheel on the projection arm until the image is clear. |
| L'alarme ne sonne pas. | L'alarme n'est pas réglée ou est désactivée. | Verify that the alarm time is set correctly and the alarm function is activated (check for alarm indicator on display). |
Caractéristiques
Marque: Équité
Modèle: 31269
Dossier spécial : Atomic Time Synchronization, Time Projection
Source d'alimentation : 1 pile AA
Type de montage : Ceiling, Wall (via projection)
Poids de l'article : 1.29 livre (environ 0.58 kg)
Réveil: Oui
Mode de fonctionnement : Atomique
Dimensions du produit : 9.5 x 7.5 x 2.75 pouces (environ 24.1 x 19.1 x 7 cm)
Garantie et assistance
For warranty information or technical support, please refer to the documentation included in your product packaging or contact Equity customer service. Keep your purchase receipt as proof of purchase.
