Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Weiser SmartCode 5 Electronic Deadbolt. The SmartCode 5 deadbolt offers keyless entry convenience with a keypad and enhanced security features, including SmartKey re-key technology. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your lock.
Image: The Weiser SmartCode 5 Electronic Deadbolt in Polished Brass finish, featuring a keypad and traditional keyhole.
Caractéristiques du produit
- Entrée sans clé : Operate the deadbolt using a personalized code on the electronic keypad.
- SmartKey Re-key Technology: Re-key the lock yourself in seconds in three easy steps, allowing you to match your existing keys.
- Traditional Keyed Entry: Includes a standard keyhole for manual operation.
- Interior Turn Button: Lock or unlock the deadbolt from the inside with a simple turn.
- Sécurité renforcée : Designed for exterior doors where robust security is essential.
- Construction durable : Features a 1-inch deadbolt throw for added security.
Image: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.
Configuration et installation
Proper installation is crucial for the optimal performance and security of your SmartCode 5 deadbolt. It is recommended to follow the detailed instructions provided in the separate installation guide included with your product. Ensure your door preparation meets the specified dimensions before beginning installation.
Étapes d'installation clés :
- Prepare the door and frame according to the provided template.
- Installez le loquet et la gâche.
- Installez le clavier extérieur.
- Install the interior assembly, ensuring proper cable connection.
- Insert 4 AA batteries (not included) into the battery pack.
- Effectuez la procédure d'inversion du sens d'ouverture de la porte pour calibrer la serrure.
SmartKey Re-keying Instructions:
The SmartKey feature allows you to re-key your lock to an existing key. This process takes seconds and requires your functioning key and the SmartKey tool.
- Insert the currently programmed key fully into the keyhole and turn it 90 degrees clockwise to the horizontal position.
- Insert the SmartKey tool firmly and fully into the SmartKey hole. Remove the SmartKey tool.
- Remove the currently programmed key.
- Insert the new key you wish to use fully into the keyhole and turn it 90 degrees counter-clockwise to the vertical position.
- Retirez la nouvelle clé. La serrure est maintenant réinitialisée. Testez-la avec la nouvelle clé pour vérifier son bon fonctionnement.
Image: The Weiser SmartCode 5 Electronic Deadbolt installed on a dark wooden door, showcasing its appearance in a home setting.
Mode d'emploi
Verrouillage de la porte :
- From Outside (Keypad): Press the 'Lock' button (the padlock icon) on the keypad.
- De l'extérieur (Légende) : Insert your key and turn it to lock the deadbolt.
- De l'Intérieur: Tournez le bouton-poussoir situé sur le mécanisme intérieur jusqu'à la position verrouillée.
Déverrouillage de la porte :
- From Outside (Keypad): Enter your 4-8 digit user code. The deadbolt will retract.
- De l'extérieur (Légende) : Insert your key and turn it to unlock the deadbolt.
- De l'Intérieur: Turn the thumb turn on the interior assembly to the unlocked position.
Programmation des codes utilisateur :
The lock comes with a default programming code and two default user codes. It is highly recommended to change these immediately after installation.
- Ouvrez le couvercle de la batterie situé à l'intérieur.
- Press the 'Program' button once.
- Enter the 4-digit Programming Code (default is 0-0-0-0).
- Press the 'Lock' button.
- Saisissez un nouveau code utilisateur de 4 à 8 chiffres.
- Press the 'Lock' button.
- Test the new user code to ensure it unlocks the door.
Refer to the full programming guide for instructions on deleting codes, enabling/disabling auto-lock, and other advanced features.
Entretien
Remplacement de la batterie :
The SmartCode 5 deadbolt requires 4 AA batteries. When the batteries are low, the lock will emit a series of beeps and/or flash a red light during operation. Replace all four batteries simultaneously with new, high-quality alkaline AA batteries.
- Retirez le couvercle de la batterie de l'ensemble intérieur.
- Retirez les anciennes piles.
- Insert four new AA alkaline batteries, observing correct polarity (+/-).
- Remettez le couvercle de la batterie.
Nettoyage:
Pour nettoyer la serrure, utilisez un chiffon doux.amp cloth. Avoid abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.
Dépannage
If you encounter issues with your Weiser SmartCode 5 Electronic Deadbolt, refer to the following common solutions:
- La serrure ne répond pas : Vérifiez le niveau de la batterie et remplacez-la si nécessaire. Assurez-vous que la connexion du câble entre les ensembles extérieur et intérieur est bien fixée.
- Le clavier ne s'allume pas : This usually indicates dead batteries. Replace all four AA batteries.
- Le pêne dormant ne s'étend/ne se rétracte pas complètement : Ensure the door frame strike plate is properly aligned and the door is not warped. Perform the door handing process again.
- User code not working: Verify the code is entered correctly. Try reprogramming the user code. Ensure the programming code has not been changed or forgotten.
- SmartKey re-keying issue: Ensure the original key is fully inserted and turned 90 degrees. The SmartKey tool must be inserted firmly and fully.
For more complex issues or if the problem persists, contact Weiser customer support or consult the full troubleshooting guide available on the Weiser website.
Caractéristiques
| Spécification | Détail |
|---|---|
| Fabricant | Weiser |
| Numéro de modèle | 9GED14900-001 |
| Style | Code intelligent 5 |
| Couleur | Laiton poli |
| Matériel | Laiton |
| Dimensions du produit | 13.79 x 8.97 x 25.3 cm |
| Poids de l'article | 1.36 kg |
| Piles requises | 4 piles AA (non incluses) |
| Type de serrure | Key Lock, Electronic Keypad |
| Code UPC | 059184200164 |
Garantie et assistance
Weiser products are backed by a limited lifetime mechanical and finish warranty, and a 1-year limited electronics warranty. For specific warranty details, claims, or technical support, please visit the official Weiser webConsultez leur site web ou contactez leur service client. Conservez votre preuve d'achat pour la garantie.
Service client Weiser : Veuillez vous référer à l'emballage de votre produit ou au site officiel de Weiser. website pour les informations de contact actuelles.
