Philips SRP2003/27 Universal Remote Control Instruction Manual

Introduction

This manual provides instructions for the Philips SRP2003/27 Universal Remote Control. This 3-in-1 remote is designed to control your television, DVD player, and cable/satellite box, simplifying your home entertainment experience. It features large buttons for improved readability and an ergonomic design for comfortable handling.

Image: Philips SRP2003/27 Universal Remote Control, angled view showing all buttons and ergonomic shape.

Contenu du colis

• Philips SRP2003 Universal Remote Control
• Manuel de l'utilisateur (ce document)

Installation

1. Installation de la batterie

The remote control requires four (4) AAA batteries (not included). Ensure correct polarity when inserting the batteries.

1. Ouvrez le couvercle du compartiment des piles au dos de la télécommande.
2. Insert four new AAA batteries, matching the (+) and (-) terminals as indicated inside the compartment.
3. Fermez soigneusement le couvercle du compartiment à piles.

2. Device Programming (SimpleSetup)

The Philips SRP2003/27 features SimpleSetup for quick device configuration. In some cases, your devices may respond automatically without manual programming. If not, follow these steps:

1. Turn on the device you wish to program (e.g., TV, DVD player, Cable box).
2. Press and hold the corresponding device button on the remote (e.g., TV, DVD, CBL). The indicator light on the remote will illuminate.
3. While holding the device button, enter the four-digit code for your device's brand. A comprehensive list of codes can be found in the included user manual or on the dedicated Philips universal remote control website.
4. Release the device button. The indicator light should turn off.
5. Pointez la télécommande vers votre appareil et appuyez sur le bouton. POUVOIR bouton. Si l'appareil s'éteint, le code est correct.
6. If the device does not turn off, repeat steps 2-5, trying the next code listed for your brand until the device responds.

This remote is compatible with over 650 devices, including various models of TVs, DVD players, Blu-Ray players, DVRs, DTVs, SAT devices, and CABLE devices.

Image : Avant view of the Philips SRP2003/27 Universal Remote Control, highlighting the large, clearly labeled buttons.

Utilisation de la télécommande

Once programmed, the remote control allows you to operate your selected devices. The buttons are intuitively laid out for ease of use.

• Device Buttons (TV, DVD, CBL, SAT, VCR, INPUT): Select the device you wish to control. The remote will operate functions for the currently selected device.
• POUVOIR: Active ou désactive le périphérique sélectionné.
• VOL +/-: Permet de régler le volume de l'appareil sélectionné.
• CH +/-: Change les chaînes sur l'appareil sélectionné.
• MUTE: Mutes the audio of the selected device.
• Pavé numérique (0-9): For direct channel entry or other numerical inputs.
• Navigation Pad (Arrows, OK): Utilisé pour la navigation et la sélection dans les menus.
• MENU, GUIDE, INFO, EXIT: Accesses specific functions on your device, such as on-screen menus, program guides, information displays, and exiting menus.
• Commandes de lecture (Lecture, Pause, Arrêt, Retour arrière, Avance rapide, Saut): Controls playback functions for DVD players, DVRs, or other media devices.

The ergonomic design and large buttons enhance operability and readability, making it comfortable to hold and easy to use.

Entretien

• Nettoyage: Use a soft, dry cloth to clean the remote control. Do not use abrasive cleaners or solvents.
• Remplacement de la batterie: Replace batteries when the remote's performance diminishes or the indicator light fails to illuminate. Always replace all four AAA batteries at the same time with new ones.
• StockageSi la télécommande n'est pas utilisée pendant une période prolongée, retirez les piles pour éviter les fuites.

Dépannage

• Remote not responding to device:
  • Assurez-vous que les piles neuves sont correctement installées.
  • Verify that the correct device button (e.g., TV, DVD) is selected on the remote.
  • Confirm that the remote is pointed directly at the device and there are no obstructions.
  • Re-enter the programming code for your device. If the first code does not work, try other codes listed for your brand.
• Certaines fonctions ne fonctionnent pas :
  • Not all functions of your original remote may be supported by the universal remote.
  • Ensure the correct device button is selected.
  • Try alternative codes for your device, as some codes may offer better compatibility with specific functions.
• Le voyant ne s'allume pas :
  • Remplacez les piles.
  • Vérifiez la polarité de la batterie.

Caractéristiques

Informations sur la garantie

The Philips SRP2003/27 Universal Remote Control is backed by a one-year limited warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Philips support resources.

Soutien

For additional assistance, programming codes, or troubleshooting, please visit the dedicated Philips universal remote control website. This resource provides comprehensive support and updated code lists for various devices.

Remarque : Spécifique website addresses are not provided in this manual. Please refer to the packaging or original documentation for direct links.