1. Introduction
Le weBoost 901117 Pole Mount is designed to provide a secure and stable mounting solution for outdoor antennas, particularly those used with cell phone signal boosters. This durable aluminum pole mount is suitable for installation on building roofs or walls, ensuring optimal placement for your external antenna.
This manual provides essential information regarding the installation, maintenance, and specifications of your weBoost 901117 Pole Mount.
2. Consignes de sécurité
- Always exercise caution when working at heights, especially on roofs or ladders. Ensure stable footing and use appropriate safety equipment.
- Do not install the pole mount during adverse weather conditions, such as strong winds, rain, or lightning.
- Ensure the mounting surface is structurally sound and can support the weight of the pole mount and the attached antenna, even in windy conditions.
- Avoid contact with power lines or other electrical hazards during installation.
- Si vous avez des doutes concernant une quelconque étape du processus d'installation, consultez un professionnel qualifié.
3. Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- 1x Pole Mount (10 inches length, 1.5 inches diameter)
- 1x U-Bracket Assembly
- 1x support de montage mural
Figure 3.1: Included components of the weBoost 901117 Pole Mount.
4. Configuration et installation
Le weBoost 901117 Pole Mount is designed for easy installation on various outdoor surfaces. Follow these steps for proper setup:
4.1. Choisissez un emplacement de montage
Select a location on your building's roof or wall that provides the best line of sight for your outdoor antenna. Ensure the surface is flat and strong enough to securely hold the mount and antenna.
Figure 4.1 : Example of pole mount installation on a roof.
4.2. Attach the Wall Mount Bracket
- Position the wall mount bracket against the chosen surface.
- Marquez les points de perçage à travers les trous du support.
- Drill pilot holes if necessary, appropriate for your mounting hardware (screws not included).
- Securely fasten the wall mount bracket to the surface using suitable screws or bolts.
4.3. Assemble the Pole and U-Bracket
- Slide the U-bracket assembly onto the pole.
- Insert the pole into the opening of the secured wall mount bracket.
- Align the U-bracket with the wall mount bracket and tighten the nuts on the U-bracket bolts to firmly secure the pole to the wall mount.
Figure 4.2: Assembled pole mount ready for antenna attachment.
4.4. Attach Your Antenna
Once the pole mount is securely installed, attach your outdoor antenna to the top of the pole using the antenna's provided mounting hardware. Ensure the antenna is oriented correctly for optimal signal reception as per its own instruction manual.
Figure 4.3 : Example of an antenna mounted on the pole.
5. Mode d'emploi
Le weBoost 901117 Pole Mount is a passive component designed to provide a stable platform for your outdoor antenna. It does not require any electrical power or active operation. Once installed, its function is to securely hold the antenna in its desired position.
6. Entretien
To ensure the longevity and continued stability of your pole mount, periodic maintenance is recommended:
- Inspection visuelle : Annually inspect the pole mount and its connections for any signs of corrosion, loose bolts, or physical damage.
- Resserrez les connexions : If any bolts or nuts appear loose, carefully re-tighten them to ensure the mount remains secure.
- Propreté: Keep the mount free from excessive dirt, debris, or ice buildup, which could add unnecessary stress.
7. Dépannage
As a passive component, the pole mount typically does not experience "malfunctions." However, if you encounter issues related to its stability or the performance of your antenna, consider the following:
- Le support est desserré : Check all mounting bolts and nuts. Ensure they are securely tightened. Verify the integrity of the mounting surface.
- Antenna Performance Issues: If your antenna's signal strength has decreased, first check the antenna itself and its connections. Then, inspect the pole mount for any shifting or damage that might have altered the antenna's orientation.
- Corrosion: While made of durable materials, prolonged exposure to harsh environments can cause corrosion. If significant corrosion is observed, consider replacement to ensure structural integrity.
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | 901117 |
| Dimensions du produit (L x l x H) | 10 inches x 1.5 inches (diameter) |
| Poids de l'article | 9.1 onces |
| Matériel | Aluminum (implied from product description and reviews) |
| Fabricant | Wilson Electronics |
| Composants inclus | Pole, U-Bracket Assembly, Wall Mount Bracket |
9. Informations sur la garantie
Le weBoost 901117 Pole Mount is covered by a Garantie constructeur de 2 ansCette garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
Pour connaître les conditions générales de garantie détaillées, veuillez consulter le site officiel. weBOost website ou contacter le support client.
10. Assistance clientèle
For technical assistance, installation questions, or warranty inquiries, please contact weBoost customer support. US-based customer support is available to assist you.
Veuillez vous référer à l'emballage de votre produit ou au site officiel. weBOost website pour les informations de contact les plus récentes.
