1. Introduction
The Zebra 220XI4 Industrial Printer is a robust and high-performance tabletop printer designed for demanding environments. It supports both direct thermal and thermal transfer printing methods, capable of producing labels up to 8.5 inches wide at a resolution of 300 dpi. Equipped with a 32-bit 133 MHz RISC processor, it ensures efficient processing for high-volume printing tasks. The printer features a durable 12-gauge steel frame, a clear media side door for supply monitoring, and a graphical LCD display for user interaction.
This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Zebra 220XI4 printer to ensure optimal performance and longevity.
2. Installation
2.1 Déballage et inspection
Carefully remove the printer from its packaging. Verify that all components are present and undamaged. The box should contain:
- One (1) Zebra 220XI4 Industrial Printer
- One (1) North American Power Cord
Si des articles sont manquants ou endommagés, contactez immédiatement votre fournisseur.
2.2 Emplacement de l'imprimante
Place the printer on a stable, level surface in a well-ventilated area. Ensure adequate space around the printer for media loading, maintenance, and proper airflow. Avoid locations with excessive dust, humidity, or direct sunlight.
2.3 Media and Ribbon Loading
The 220XI4 printer supports various media types including black mark, continuous, roll-fed, die-cut, and fanfold. Media thickness can range from 0.003" (0.076 mm) to 0.012" (0.305 mm).
Figure 1 : Interne view of the Zebra 220XI4 printer with the top cover open, illustrating the media and ribbon loading paths. The image highlights the spindle for the ribbon and the adjustable guides for label media.
- Open the clear media side door and the top cover of the printer.
- For thermal transfer printing, load the ribbon onto the supply spindle, ensuring it unwinds correctly.
- Load the label media roll onto the media supply spindle.
- Thread the media through the printer mechanism, ensuring it passes under the print head and through the media guides.
- Adjust the media guides to fit the width of your labels.
- Close the top cover and the clear media side door.
- The printer will perform an auto-calibration to detect the media type and length.
2.4 Connexion d'alimentation
Connect the provided power cord to the printer's power inlet and then to a grounded electrical outlet. The printer supports a universal power supply (90 to 264 VAC, 48 to 62 Hz).
2.5 Connectivité
The Zebra 220XI4 offers multiple connectivity options for integration into your system.
Figure 2 : Rear panel of the Zebra 220XI4 printer, displaying the serial (RS-232), bi-directional parallel, and USB 2.0 ports, along with the power inlet and switch.
- USB 2.0 : Connect the printer to your computer using a standard USB cable.
- Série (RS-232) : For serial communication, connect a compatible serial cable.
- Bi-directional Parallel: Use a parallel cable for this connection type.
- Ethernet (en option) : The printer may include an optional 10/100 Ethernet port for network connectivity.
After connecting the printer, install the necessary drivers on your computer. Refer to the Zebra webSite pour télécharger les derniers pilotes.
3. Mode d'emploi
3.1 Mise sous/hors tension
- To power on, press the power switch located on the rear of the printer.
- To power off, press the power switch again. Always ensure no print jobs are active before powering off.
3.2 Utilisation de l'écran LCD
The printer features a 240 x 128 pixel graphical, backlit LCD display. Use the navigation buttons adjacent to the display to access and configure printer settings, monitor status, and view error messages. The menus are multilingual and customizable.
3.3 Impression de base
- Assurez-vous que l'imprimante est allumée et connectée à votre ordinateur ou à votre réseau.
- Load the appropriate media and ribbon (if thermal transfer).
- From your application, select the Zebra 220XI4 printer.
- Configure print settings such as label size, orientation, and quantity.
- Initiate the print job. The printer will automatically calibrate and begin printing.
3.4 Print Quality Adjustment
The printer offers advanced controls for print quality:
- Darkness Settings: Adjust the print darkness (up to 300 settings) via the LCD menu or printer driver to optimize readability.
- Element Energy Equalizer (E3): This feature ensures consistent print quality across the entire label.
- Print Head Test: The intelligent print head can test for element outages, helping to diagnose and prevent print quality issues.
4. Entretien
Regular maintenance ensures the longevity and optimal performance of your Zebra 220XI4 printer.
4.1 Nettoyage de la tête d'impression
The print head should be cleaned regularly, especially after every ribbon or media roll change, or if print quality degrades.
- Power off the printer and disconnect the power cord.
- Ouvrez le capot supérieur.
- Using a cotton swab lightly moistened with isopropyl alcohol (99% pure), gently wipe the dark line across the print head.
- Laissez la tête d'impression sécher complètement avant de fermer le capot et de mettre l'imprimante sous tension.
4.2 Nettoyage du rouleau plateau
The platen roller (the rubber roller beneath the print head) should also be cleaned periodically to prevent media jams and ensure proper media feeding.
- Power off the printer and disconnect the power cord.
- Ouvrez le capot supérieur.
- Rotate the platen roller manually while wiping its surface with a lint-free cloth moistened with isopropyl alcohol.
- Laisser sécher complètement avant utilisation.
4.3 Media and Ribbon Replacement
Refer to Section 2.3 "Media and Ribbon Loading" for detailed instructions on replacing consumables. Always use Zebra-approved media and ribbons for best results.
5. Dépannage
This section addresses common issues you might encounter with your Zebra 220XI4 printer.
5.1 Pas d'alimentation
- Assurez-vous que le cordon d'alimentation est correctement branché à la fois à l'imprimante et à une prise électrique fonctionnelle.
- Vérifiez que l'interrupteur d'alimentation est en position « Marche ».
- Testez la prise avec un autre appareil.
5.2 Mauvaise qualité d'impression
- Faint or Missing Print: Adjust print darkness settings. Clean the print head (see Section 4.1). Ensure the correct ribbon is used for thermal transfer.
- Smudged Print: Reduce print darkness. Ensure media and ribbon are compatible. Clean the print head and platen roller.
- Vertical Lines: Indicates a dirty or damaged print head element. Clean the print head. If the issue persists, the print head may need replacement.
5.3 Media Jams
- Open the top cover and clear any jammed media.
- Ensure media is loaded correctly and guides are properly adjusted (see Section 2.3).
- Clean the platen roller (see Section 4.2).
- Verify media specifications are within the printer's supported range.
5.4 Problèmes de connectivité
- Check all cable connections (USB, Serial, Parallel, Ethernet).
- Assurez-vous que le pilote d'imprimante approprié est installé et à jour.
- Verify printer settings on your computer match the physical connection type.
- For network connections, check network cables and IP address settings.
For more complex issues, consult the full technical documentation or contact Zebra support.
6. Spécifications
| Fonctionnalité | Description |
|---|---|
| Méthode d'impression | Direct Thermal, Thermal Transfer |
| Résolution | 300 dpi (12 points / mm) |
| Print Width (Max) | 8.5 pouces (216 mm) |
| Print Length (Max) | 150 inches (3810 mm) using continuous media |
| Print Speed (Max) | 10 pouces par seconde |
| Mémoire | 16 MB SD RAM, 8 MB Flash |
| Processeur | 32-bit 133 MHz RISC |
| Connectivité | USB 2.0, Serial (RS-232), Bi-directional Parallel, 10/100 Ethernet (optional) |
| Types de médias | Black mark, continuous, roll-fed, die-cut, fanfold |
| Épaisseur du support | 0.003" (0.076 mm) to 0.012" (0.305 mm) |
| Diamètre maximum du rouleau | 8.0 pouces (203 mm) |
| Diamètre du noyau | 3 pouces (76 mm) |
| Longueur du ruban | 1476 ft (450 m) or 984 ft (300 m) |
| Dimensions (H x L x P) | 15.5 x 15.81 x 20.38 pouces (393.7 x 401.6 x 517.5 mm) |
| Poids | 75 livres (34 kg) |
| Alimentation électrique | Universal 90-264 VAC, 48-62 Hz |
| Afficher | 240 x 128 pixel graphical, backlit LCD |
7. Informations sur la garantie
The Zebra 220XI4 Industrial Printer comes with a garantie limitée. Specific terms and conditions of the warranty, including coverage duration and limitations, are provided with the product documentation at the time of purchase. Please refer to your warranty card or contact Zebra Technologies for detailed information regarding your product's warranty.
8. Assistance technique
For technical assistance, driver downloads, or further product information, please visit the official Zebra Technologies website ou contactez leur support client.
- Zebra Technologies Website: www.zebra.com
- Assistance clientèle : Refer to the contact information provided on the Zebra website de votre région.