Produit terminéview
The CMA Dishmachines AH is a robust, door-type commercial dishwasher designed for efficient low-temperature chemical sanitizing. This model is capable of processing approximately 40 racks per hour, making it suitable for various food service environments. It features a straight-thru design, top-mounted controls, and an automatic start/stop function for ease of use. Constructed from durable stainless steel, the AH dishwasher includes a delimer switch and a Poly Pro scrap accumulator for effective cleaning and maintenance.
Image: CMA Dishmachines AH Door Type Dishwasher. This image displays the full stainless steel unit, highlighting its compact, freestanding design. Visible components include the top-mounted control panel, the door opening mechanism on the left, and the lower section housing the wash pump and scrap accumulator. The overall appearance is industrial and functional.
Consignes de sécurité
Always read and understand all instructions before operating the dishwasher. Failure to follow safety guidelines may result in injury or damage to the equipment.
- Ensure the unit is properly grounded and connected to the specified electrical supply (120 Volts).
- Do not operate the dishwasher without proper ventilation.
- Use only approved low-temperature chemical sanitizers and detergents. Refer to chemical manufacturer's instructions for safe handling.
- Pendant le fonctionnement, tenez vos mains et vos vêtements éloignés des pièces mobiles.
- In case of malfunction or unusual noise, immediately turn off the unit and disconnect power before inspection.
- Only qualified personnel should perform maintenance and repairs.
Configuration et installation
Une installation correcte est essentielle pour un fonctionnement optimal et une sécurité maximale. Il est recommandé de faire appel à un technicien qualifié.
- Déballage: Carefully remove the dishwasher from its packaging. Inspect for any shipping damage. Report any damage to the carrier immediately.
- Placement: Position the freestanding unit on a level, stable surface. Ensure adequate clearance around the machine for ventilation, maintenance, and door operation.
- Raccordement d'eau : Connect the dishwasher to a potable water supply. The unit requires a specific water pressure and temperature for optimal operation. Refer to local plumbing codes.
- Connexion de vidange : Connect the drain line to an appropriate floor drain or waste receptor, ensuring proper slope for gravity drainage.
- Connexion électrique : Connect the unit to a dedicated 120 Volt electrical circuit as per local electrical codes. Ensure proper grounding.
- Chemical Dispenser Setup: Connect the chemical lines from the external chemical dispensers (not included) to the designated ports on the dishwasher. Ensure proper priming of chemical pumps.
Mode d'emploi
Follow these steps for daily operation of your CMA Dishmachines AH dishwasher.
- Pre-Scraping: Before loading, scrape all large food particles from dishes and utensils. This prevents clogging and ensures effective cleaning.
- Loading Racks: Load dishes into the provided racks (one open and one peg rack included). Ensure items are spaced to allow water and chemical spray to reach all surfaces. Do not overload racks.
- Closing Door: Close the dishwasher door securely. The machine features an auto "start/stop" function, which initiates the cycle upon door closure.
- Initiation aux cycles : The wash cycle will automatically begin once the door is closed. The low-temperature chemical sanitizing process will run for a preset duration.
- Delimer Switch: If lime scale buildup is observed, activate the delimer switch as needed. Consult your chemical supplier for appropriate deliming agents and procedures.
- Déchargement: Once the cycle is complete, open the door and carefully remove the clean, sanitized racks. Allow items to air dry if necessary.
Entretien
Regular maintenance ensures the longevity and efficient operation of your dishwasher.
- Nettoyage quotidien : At the end of each day, drain the machine, remove and clean the Poly Pro scrap accumulator, and wipe down the interior and exterior stainless steel surfaces.
- Inspection du bras de pulvérisation : Regularly inspect spray arms for clogged nozzles. Clean any blockages to ensure proper water distribution.
- Chemical Levels: Monitor chemical levels (detergent, sanitizer, rinse aid) in external dispensers and refill as needed.
- Décalaminage : Perform deliming procedures regularly, especially in hard water areas, to prevent mineral buildup. Use the delimer switch and appropriate chemicals.
- Inspection des joints : Check door gaskets for wear or damage. Replace worn gaskets to prevent leaks and maintain proper sealing.
- Service professionnel : Schedule periodic professional maintenance checks to ensure all components are functioning correctly and to address any potential issues.
Dépannage
This section provides solutions to common operational issues. For problems not listed, contact customer support.
| Problème | Cause possible | Solution |
|---|---|---|
| Le lave-vaisselle ne démarre pas. | No power; Door not fully closed; Circuit breaker tripped. | Vérifiez l'alimentation électrique ; assurez-vous que la porte est bien verrouillée ; réenclenchez le disjoncteur. |
| Dishes not clean. | Clogged spray arms; Insufficient chemical levels; Improper loading; Low water pressure. | Clean spray arm nozzles; Refill chemical dispensers; Reload racks correctly; Check water supply. |
| L'eau ne s'écoule pas. | Clogged drain line; Scrap accumulator full. | Clear drain line obstruction; Empty and clean scrap accumulator. |
| Mousse excessive. | Too much detergent; Wrong type of detergent. | Reduce detergent dosage; Use recommended low-foaming detergent. |
Spécifications techniques
| Fonctionnalité | Détail |
|---|---|
| Modèle | AH |
| Marque | Lave-vaisselle CMA |
| Taper | Door Type, Low Temperature Chemical Sanitizing |
| Racks par heure | Up to 40 racks/hour |
| Voltage | 120 volts |
| Consommation d'eau | 1.7 gallons par cycle |
| Dimensions du produit (L x P x H) | 25.75 x 25.75 x 57 pouces (environ) |
| Matériel | construction en acier inoxydable |
| Pompe de lavage | 1 CV |
| Caractéristiques | Top-mounted controls, Auto "start/stop", Delimer switch, Poly Pro scrap accumulator, NSF, cULus certified. |
| Composants inclus | Dishwasher unit, 1 open rack, 1 peg rack |
Informations sur la garantie
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official CMA Dishmachines website. Typically, commercial dishwashers come with a limited warranty covering manufacturing defects for a specified period from the date of purchase. Keep your proof of purchase for warranty claims.
Assistance clientèle
If you require further assistance, have questions about operation, or need to schedule service, please contact CMA Dishmachines customer support.
- Website: www.cmadishmachines.com (Examp(le lien, à remplacer par la version réelle si disponible)
- Téléphone: Consult the product documentation or website pour le numéro de contact le plus récent.
- Service: When contacting support, please have your model number (AH) and serial number ready.
