Introduction
The Samson Resound RS15HD is a high-performance 15-inch 2-way passive PA cabinet designed for professional audio applications. This speaker cabinet delivers powerful, full-range sound suitable for various venues, from live performances to houses of worship. Its robust construction ensures durability and consistent performance.
Caractéristiques principales
- Two-way passive PA speaker cabinet
- 600 watt program power handling @ 8 ohms
- Custom designed 15-inch low frequency driver
- 1.5-inch titanium compression driver
- Dual 1/4-inch and Speakon connections for versatile connectivity
Produit terminéview
Figure 1 : Face avant view of the Samson Resound RS15HD PA Cabinet. This image displays the robust black cabinet with a full metal grille protecting the 15-inch low-frequency driver and the high-frequency compression driver. The Samson logo is prominently displayed at the bottom center of the grille.
Guide d'installation
Follow these steps to properly set up your Samson Resound RS15HD PA Cabinet:
- Placement: Position the speaker on a stable, flat surface or a compatible speaker stand. Ensure the speaker is placed in a location that allows for optimal sound dispersion and avoids obstructions.
- Connectivité : Connectez votre source audio (par exemple, amplifier, mixer) to the RS15HD using high-quality speaker cables. Utilize either the 1/4-inch or Speakon connections on the rear panel. Ensure secure connections to prevent signal loss or damage.
- Adaptation d'impédance : Verify that the impedance of your amplifier matches the 8-ohm impedance of the RS15HD cabinet. Mismatched impedance can lead to poor performance or damage to your equipment.
- Mise sous tension initiale : Avant d'allumer votre amplifier, ensure all volume controls are set to their minimum. Power on the amplifier, then slowly increase the volume to a desired listening level.
Important: Always ensure your amplifier is turned off before making any connections to the speaker cabinet.
Mode d'emploi
The Samson Resound RS15HD is a passive speaker, meaning it requires an external amplifier to operate. Proper operation involves managing the amplifier's output and monitoring sound levels.
- Contrôle du volume : Réglez le volume principalement à partir de votre amplifier or mixer. Avoid pushing the amplifier into clipping (distortion), as this can damage the speaker.
- Égalisation: Use the equalizer on your mixer or amplifier to fine-tune the sound. The RS15HD is designed for a balanced frequency response, but minor adjustments may be needed for different acoustic environments.
- Surveillance: Listen for any signs of distortion or stress from the speaker. If distortion occurs, reduce the input level or amplifier volume immediately.
- Connexion en guirlande : If connecting multiple passive speakers, ensure the total impedance presented to the amplifier is within its safe operating range. Consult your amplifier's manual for specific guidelines.
Entretien et soins
To ensure the longevity and optimal performance of your RS15HD PA Cabinet, follow these maintenance guidelines:
- Nettoyage: Use a soft, dry cloth to clean the exterior of the cabinet. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Stockage: Lorsqu'il n'est pas utilisé, rangez l'enceinte dans un endroit sec et frais, à l'abri de la lumière directe du soleil et des températures extrêmes.
- Protection: Protect the speaker from physical impact and moisture. Consider using a protective cover during transport or storage.
- Inspection: Periodically inspect the speaker grille, connections, and cabinet for any signs of wear or damage. Address any issues promptly.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Pas de sortie audio |
|
|
| Son déformé |
|
|
| Son intermittent |
|
|
Spécifications techniques
| Nom du modèle | RS15HD |
| Numéro de modèle de l'article | 02-06-004 |
| Type de haut-parleur | Passive PA Speaker Cabinet |
| Taille du haut-parleur | 15 Inches (Low Frequency Driver) |
| Pilote haute fréquence | 1.5-inch Titanium Compression Driver |
| Gestion de la puissance du programme | 600 watts |
| Impédance | 8 ohms |
| Relations | Dual 1/4-inch and Speakon |
| Construction d'armoires | All-plywood |
| Poids de l'article | 44.5 livres |
| Marque | SAMSON |
| Code UPC | 809164008637 |
Garantie et assistance
For detailed warranty information and technical support, please refer to the official Samson website or contact Samson customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Samson Technologies Contact Information:
- Website: www.samsontech.com
- Soutien: Consultez la section d'assistance sur le site officiel. webSite regroupant les FAQ, les téléchargements et les options de contact.
