SOLO 416-Li

SOLO 416-Li Battery-Powered Backpack Sprayer Instruction Manual

Introduction

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your SOLO 416-Li Battery-Powered Backpack Sprayer. Please read this manual thoroughly before initial use and keep it for future reference.

The SOLO 416-Li is designed for various spraying tasks, including applications in enclosed spaces like greenhouses and office buildings where extended spraying is required. It is suitable for applying pesticides, herbicides, and for general spraying. This battery-powered sprayer operates quietly and produces no emissions.

Caractéristiques principales

Composants terminésview

Unité principale

Système de pulvérisation

Côté view of the SOLO 416-Li backpack sprayer showing the translucent tank, red base, and pressure gauge on the wand.
Cette image montre le profil latéralfile of the SOLO 416-Li sprayer, highlighting the translucent tank with volume markings and the integrated pressure gauge on the spray wand for precise application control.
Dos view of the SOLO 416-Li backpack sprayer showing the padded shoulder straps and waist belt.
L'arrière view of the sprayer illustrates the ergonomic design with padded shoulder straps and a waist belt, ensuring comfort during extended use.

Configuration et assemblage

Déballage

Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged. Retain packaging for storage or potential returns.

Installation et charge initiale de la batterie

Locate the battery compartment, typically at the base of the sprayer. Insert the 11V 7.8Ah lithium-ion battery. Connect the provided battery charger to the charging port on the sprayer and plug it into a standard electrical outlet. Allow approximately 5.5 hours for a full charge before first use.

Close-up of the SOLO 416-Li sprayer's charging port with a charger connected.
This image shows the charging port located on the red base of the sprayer, with the battery charger plug inserted. Ensure a secure connection for proper charging.

Wand and Hose Connection

Attach the spray hose securely to the outlet on the sprayer's base. Connect the 36-inch carbon fiber wand to the other end of the hose. Ensure all connections are tight to prevent leaks.

Sélection de buse

Select the appropriate nozzle for your spraying task from the interchangeable spray nozzle system. Attach it firmly to the end of the spray wand.

Mode d'emploi

Remplissage du réservoir

Ensure the sprayer is on a stable, level surface. Unscrew the tank cap. Prepare your liquid solution according to the chemical manufacturer's instructions. Use the integrated strainer to prevent debris from entering the tank. Fill the tank up to the desired level, not exceeding the maximum capacity of 4.5 gallons. Securely replace the tank cap.

A person wearing a SOLO 416-Li backpack sprayer, spraying plants in a greenhouse.
This image demonstrates the SOLO 416-Li backpack sprayer in use within a greenhouse environment, showing a user applying liquid to plants. The translucent tank allows for easy monitoring of liquid levels.

Powering On and Pressure Adjustment

Locate the two-step toggle switch on the sprayer's base. Switch it to the desired pressure setting: 36psi for lower pressure or 62psi for higher pressure. The pump will activate, and the pressure gauge on the wand will indicate the current operating pressure.

Close-up of the two-step toggle power switch on the SOLO 416-Li sprayer's red base.
This image highlights the two-step toggle switch on the sprayer's base, used to select between 36psi and 62psi pressure settings for varied spraying needs.

Pulvérisations

Aim the nozzle at the target area. Press the trigger on the spray wand to begin spraying. Release the trigger to stop. Maintain a consistent distance and motion for even application.

Entretien

Nettoyage après utilisation

After each use, especially when using chemicals, thoroughly rinse the tank, hose, and wand with clean water. Operate the sprayer with clean water for a few minutes to flush out any chemical residue from the pump and lines. This prevents clogging and extends the life of the sprayer.

Drainage et stockage

To completely drain the tank, use the drain valve located at the bottom of the sprayer. Ensure all liquid is removed before storing. Store the sprayer in a cool, dry place, away from direct sunlight and freezing temperatures. Disconnect the battery if storing for extended periods.

Close-up of the drain valve located at the bottom of the SOLO 416-Li backpack sprayer.
This image shows the red drain valve at the base of the sprayer, designed for easy and complete emptying of the tank after use or before storage.

Entretien de la batterie

Recharge the lithium-ion battery after each use. Avoid completely draining the battery to prolong its lifespan. If storing for a long time, charge the battery to about 50% and store it in a cool, dry place. Recharge every 3-6 months if not in use.

Dépannage

ProblèmeCause possibleSolution
Le pulvérisateur ne s'allume pas.Batterie non chargée ou mal installée.Ensure battery is fully charged and correctly seated in its compartment. Check charger connection.
Pas de pulvérisation ou pulvérisation faible.Clogged nozzle or filter. Low battery. Air in the system.Clean the nozzle and internal filter. Recharge battery. Prime the pump by spraying water until consistent flow is achieved.
Fuites au niveau des connexions.Loose hose connections or worn seals.Tighten all hose connections. Inspect seals and O-rings for damage and replace if necessary.
Inconsistent pressure.Low battery. Clogged components.Ensure battery is fully charged. Clean all filters and nozzles.

Caractéristiques

FonctionnalitéDétail
MarqueSOLO
Numéro de modèle416-Li
Volume du réservoir4.5 Gallons (approx. 17 liters)
Source d'énergieBattery Powered (11V 7.8Ah Lithium-Ion)
Temps de chargeEnviron 5.5 heures
Pression maximale62 PSI
Adjustable Pressure Settings36 PSI and 62 PSI
Longueur de la baguette36 inches (Carbon Fiber)
Composants inclusBattery Charger, Interchangeable Spray Nozzle System
Poids de l'article14 Pounds (empty)
Utilisations recommandéesPest Control, Weed Control, Garden spraying, Sanitizing

Consignes de sécurité

Garantie et assistance

For warranty information, please refer to the documentation included with your product or visit the official SOLO website. For technical support or replacement parts, contact SOLO customer service.

Fabricant: Solo

Website: nous.solo.global

Produit terminéview Vidéo

Cette vidéo offre un aperçu généralview of Solo sprayers, including different types and their applications. It helps in understanding the versatility and features of Solo products.

Documents connexes - 416-Li

Préview Manuel d'utilisation du pulvérisateur à dos à batterie SOLO 442
Manuel d'utilisation complet du pulvérisateur dorsal à batterie SOLO 442, couvrant son fonctionnement, la sécurité, l'entretien, le montage et les spécifications techniques. Inclut des instructions sur la charge et l'utilisation de la batterie.
Préview Pulvérisateur dorsal à batterie SOLO 442 - Manuel d'utilisation et guide technique
Manuel d'utilisation et guide technique complets pour le pulvérisateur dorsal à batterie SOLO 442, couvrant le fonctionnement, la sécurité, le montage, l'entretien et les spécifications. Inclut les déclarations de conformité CE.
Préview SOLO 442 Battery Backpack Sprayer User Manual and Operating Instructions
Comprehensive guide to operating, maintaining, and safely using the SOLO 442 battery backpack sprayer, including assembly, charging, and technical specifications.
Préview Pulvérisateur dorsal à batterie SOLO 442 : Manuel d’utilisation et instructions de fonctionnement
Manuel d'utilisation complet du pulvérisateur dorsal à batterie SOLO 442. Découvrez les consignes de sécurité, le montage, l'entretien et les caractéristiques techniques de cet outil de jardinage et d'agriculture sans fil.
Préview Manuel d'utilisation du pulvérisateur à dos à batterie SOLO 442
Manuel d'utilisation complet du pulvérisateur à dos à batterie SOLO 442 de SOLO KLEINMOTOREN GmbH. Ce manuel couvre le fonctionnement en toute sécurité, le montage, l'entretien et les spécifications techniques pour une utilisation au jardin et en agriculture.
Préview Pulvérisateur dorsal à batterie SOLO 442 - Manuel d'utilisation
Manuel d'utilisation complet du pulvérisateur dorsal à batterie SOLO 442, couvrant son fonctionnement, les consignes de sécurité, son entretien et ses caractéristiques techniques. Ce document fournit des instructions détaillées pour une utilisation sûre et efficace du pulvérisateur dorsal électrique SOLO 442.