Case CA334

Case Military 00334 USMC Fixed Blade Knife Instruction Manual

Modèle : CA334

1. Consignes de sécurité

This product is a sharp instrument and must be handled with extreme care. Improper use can result in serious injury. Always keep the blade sheathed when not in use and store it out of reach of children. Users are responsible for understanding and complying with all local laws and regulations regarding knife ownership and carry.

Avertissement concernant la Proposition 65 de Californie : Ce produit contient des produits chimiques reconnus par l’État de Californie comme pouvant provoquer le cancer, des malformations congénitales ou d’autres troubles de la reproduction.

2. Produit terminéview

The Case Military 00334 USMC Fixed Blade Knife is an authentic reproduction featuring a blackened 1095 carbon steel blade and a grooved leather handle. It is designed for durability and reliable performance. The knife comes with a genuine leather sheath for protection and secure carrying.

Caractéristiques principales :

  • Blackened 1095 Carbon Steel blade, guard, and end cap.
  • Grooved leather handle for a secure grip.
  • Authentic reproduction of the United States Marine Corps prototype.
  • Includes a genuine leather sheath with USMC and Case XX logos.
  • Overall Length: 12.13 inches, Blade Length: 7 inches.
Case Military 00334 USMC Fixed Blade Knife

Figure 2.1: The Case Military 00334 USMC Fixed Blade Knife, showcasing its blackened blade and grooved leather handle.

3. Installation

The knife is supplied with a genuine leather sheath designed for secure storage and transport.

3.1 Sheath Attachment

  1. Insert the knife blade fully into the leather sheath until the guard rests against the sheath opening.
  2. Secure the handle by fastening the snap closure strap around the knife's handle, ensuring it is snug to prevent accidental dislodgement.
  3. The sheath features a belt loop for attachment to a belt and a leg tie-down cord for additional security.
Case Military 00334 USMC Fixed Blade Knife in its leather sheath

Figure 3.1: The Case USMC knife securely fastened within its genuine leather sheath.

Genuine leather sheath for Case Military 00334 USMC Fixed Blade Knife

Figure 3.2: The genuine leather sheath, showing the belt loop and leg tie-down cord.

4. Mode d'emploi

This knife is designed for general utility and outdoor tasks. Always prioritize safety during use.

4.1 Proper Grip

Hold the knife firmly by the grooved leather handle. Ensure your hand is positioned behind the hand guard to prevent it from slipping onto the blade during use. The ambidextrous design allows for comfortable use by both left and right-handed individuals.

Hand holding the Case Military 00334 USMC Fixed Blade Knife

Figure 4.1: Demonstrating a proper grip on the knife handle, with the hand positioned behind the guard.

4.2 Blade Use

The 7-inch 1095 carbon steel blade is extremely sharp. Use controlled movements when cutting or piercing. Avoid prying or twisting the blade, as this can cause damage or injury. Always cut away from your body and keep bystanders at a safe distance.

5. Entretien

Regular maintenance will ensure the longevity and performance of your Case USMC knife.

5.1 Nettoyage

  • After each use, especially if exposed to moisture or corrosive materials, clean the blade with a damp chiffon et savon doux.
  • Thoroughly dry the blade immediately to prevent rust, as 1095 carbon steel is susceptible to corrosion.
  • Wipe the leather handle with a clean, dry cloth. Avoid excessive moisture on the leather.

5.2 Affûtage

The blade comes factory sharp. Over time, the edge may dull with use. Use a suitable sharpening stone or system to maintain the blade's edge. Follow the manufacturer's instructions for your chosen sharpening tool. Maintain the original blade angle for optimal performance.

5.3 Entretien du cuir

The genuine leather handle and sheath may benefit from occasional conditioning with a leather conditioner to keep them supple and prevent drying or cracking. Apply sparingly and buff with a soft cloth.

6. Stockage

Store the knife in its sheath in a dry environment to prevent moisture accumulation on the blade and leather. Keep it in a secure location, inaccessible to unauthorized users, especially children.

7. Dépannage

Lame émoussée 7.1

If the blade becomes dull, refer to Section 5.2 for sharpening instructions. A properly sharpened blade is safer and more effective.

7.2 Rust on Blade

1095 carbon steel can rust if not properly maintained. If rust appears, it can often be removed with fine steel wool or a rust eraser, followed by re-oiling the blade. Ensure thorough drying after each use to prevent recurrence.

7.3 Loose Sheath Fit

Over time, leather can stretch. Ensure the snap closure is securely fastened. If the fit becomes too loose, consider consulting a leather specialist for adjustments or replacement.

8. Spécifications

FonctionnalitéDétail
Nom du modèleCA334
Matériau de la lameBlackened 1095 Carbon Steel
Longueur de la lame7 pouces
Matériau de la poignéeGenuine Grooved Leather
Longueur totale12.13 pouces
Poids de l'article0.1 Kilograms (approximately 10.2 Ounces)
Composants inclusUS Marine Corps Knife, Genuine Leather Sheath
FabricantCase Cutlery
Pays d'origineÉtats-Unis
Code UPC021205003344

9. Garantie et assistance

9.1 Garantie à vie limitée

This Case Military 00334 USMC Fixed Blade Knife is backed by a Limited Lifetime Warranty from the manufacturer. This warranty covers defects in materials and workmanship under normal use. For specific details regarding warranty coverage and claims, please refer to the official Case Cutlery webconsultez le site ou contactez directement leur service client.

9.2 Assistance clientèle

For any questions, concerns, or assistance with your product, please contact Case Cutlery customer support. Contact information can typically be found on the manufacturer's official website ou emballage du produit.

Documents connexes - CA334

Préview Lame de bulldozer pour pelle hydraulique CASE CX80C : caractéristiques et performances
Spécifications détaillées, données de performance et capacités de levage de la pelle hydraulique CASE CX80C avec lame de bulldozer, certifiée Tier 4 Final. Comprend le moteur, la transmission, le système hydraulique, l'environnement de l'opérateur, les dimensions et les caractéristiques techniques.
Préview Manuel d'utilisation des chargeuses-pelleteuses CASE 580E et 580S Construction King | JI Case
Manuel d'utilisation complet pour les chargeuses-pelleteuses CASE 580E et 580S Construction King. Ce manuel couvre la sécurité, le fonctionnement, l'entretien et les spécifications techniques. Fourni par JI Case.
Préview Manuel d'entretien de la chargeuse-pelleteuse Case 580 Super E
Manuel d'entretien complet pour la chargeuse-pelleteuse Case 580 Super E, couvrant la maintenance, le dépannage et les spécifications de tous les principaux systèmes, y compris le moteur, le carburant, l'électricité, les freins, l'hydraulique et la transmission.
Préview Pelle hydraulique CASE CX80 : Caractéristiques et spécifications
Découvrez la pelle hydraulique CASE CX80, une machine puissante et polyvalente conçue pour divers travaux de construction et d'aménagement de chantier. Ce document détaille son moteur, son système hydraulique, le confort de sa cabine, son châssis, ses accessoires, ses performances, ses dimensions et ses équipements de série et en option.
Préview CASE 580K Construction King Loader Backhoe Parts Catalog - Find Parts & Diagrams
Official parts catalog for the CASE 580K Construction King Loader Backhoe. Features detailed illustrations, part numbers, and indexes for maintenance and repair. Issued February 1989.
Préview Guide des produits Case 2020 : Découvrez des couteaux et des couverts de qualité
Découvrez le guide des produits 2020 de WR Case & Sons Cutlery Company, présentant une vaste sélection de couteaux de poche, de couteaux de chasse et de coutellerie fabriqués aux États-Unis. Consultez les spécifications détaillées et découvrez l'histoire de Case.tage.