1. Introduction
The Dickson TM320 is a versatile data logger designed to accurately monitor and record temperature and humidity levels. Featuring a large display for real-time readings, audio/visual alarms, and convenient data transfer options via USB and flash card, it provides essential environmental monitoring for various applications. Its user-friendly design ensures ease of use and reliable performance.
- USB Enabled Download: Easily transfer recorded data to a computer.
- Flash Memory Data Transfer Capability: Utilize flash cards for convenient data retrieval.
- Jumbo Display: Clear and easy-to-read real-time measurements.
- Facile à utiliser : Intuitive interface for straightforward operation.
2. Consignes de sécurité
Please read all safety instructions before operating the device. Failure to do so may result in damage to the device or personal injury.
- Do not expose the device to extreme temperatures outside its specified operating range.
- Avoid direct contact with water or high humidity environments beyond the non-condensing range.
- Utilisez uniquement les sources d'alimentation et les accessoires spécifiés.
- N’essayez pas d’ouvrir ou de réparer l’appareil vous-même. Confiez toute réparation à un personnel qualifié.
- Tenir hors de portée des enfants.
3. Contenu du colis
Vérifiez que tous les éléments sont présents dans le colis :
- Dickson TM320 Data Logger
- Manuel d'instructions (ce document)
- Câble USB (peut être vendu séparément)
- SD Card (may be sold separately)
- Batteries (may be pre-installed or included)
4. Produit terminéview
Figure 4.1 : Face avant View. Shows the large digital display, 'DICKSON' branding, and three control buttons: MIN/MAX, ALARM, and SAVE.
Figure 4.2 : Côté View avec des ports. Illustrates the mini-USB port for data transfer and external sensor input jacks, along with ventilation for internal sensors.
Figure 4.3 : Retour View. Displays the battery compartment cover and keyhole slots for wall mounting.
Figure 4.4 : Haut View. Shows the slot for inserting an SD card for data storage and transfer.
5. Installation
5.1. Installation de la batterie
- Repérez le compartiment de la batterie à l'arrière de l'appareil (voir figure 4.3).
- Faites glisser le couvercle de la batterie pour l'ouvrir.
- Insert the required batteries (typically AA or AAA, check compartment for type) ensuring correct polarity (+/-).
- Fermez soigneusement le couvercle de la batterie.
5.2. Mise sous tension initiale
The device should power on automatically once batteries are installed. The display will illuminate, showing current readings or a startup sequence.
5.3. Montage de l'appareil
The TM320 can be placed on a flat surface or mounted on a wall:
- Placement en surface : Ensure the device is placed on a stable, level surface away from direct heat sources or extreme drafts.
- Montage mural : Use appropriate screws (not included) with the keyhole slots on the back of the device (refer to Figure 4.3) to secure it to a wall. Ensure it is mounted in a location representative of the environment you wish to monitor.
6. Fonctionnement
6.1. Comprendre l'affichage
The jumbo display provides real-time information:
- Lecture actuelle : Shows the live temperature or humidity value.
- Unités: Indicates Fahrenheit (F) or Celsius (C) for temperature, and %RH for humidity.
- Indicateur de batterie : Affiche la durée de vie restante de la batterie.
- CH (Canal) : Indicates which channel is currently displayed (e.g., CH 1 for temperature, CH 2 for humidity).
6.2. Fonctions des boutons
- Bouton MIN/MAX : Press to cycle through minimum, maximum, and current readings for both temperature and humidity. Hold to reset min/max values.
- Bouton d'alarme: Appuyez pour view current alarm settings. Hold to enter alarm setting mode (refer to section 6.4).
- Bouton ENREGISTRER : Press to manually save a data point.
6.3. Enregistrement des données
The TM320 automatically logs data at a pre-set interval. Data can be viewed on the display or downloaded to a computer.
6.4. Réglage des alarmes
The device features audio/visual alarms for out-of-range conditions.
- Appuyez et maintenez enfoncé le ALARME button until the alarm setting mode is activated.
- Utilisez le MIN MAX button to navigate between temperature and humidity alarm settings (high/low).
- Utilisez le SAUVEGARDER button to adjust the alarm threshold values.
- Presse ALARME à nouveau pour confirmer et quitter le mode de réglage.
6.5. Téléchargement de données (USB)
- Connect the TM320 to your computer using a compatible USB cable (refer to Figure 4.2 for port location).
- The device should be recognized as a removable storage device or require specific Dickson software (refer to manufacturer's website pour les logiciels).
- Follow the software instructions to download and analyze the logged data.
6.6. Data Transfer (Flash Card)
If your model supports flash card data recovery:
- Insert a compatible SD card into the SD card slot (refer to Figure 4.4).
- The device may automatically transfer data or require a specific button press (consult software/manual for details).
- Remove the SD card and insert it into a computer's card reader to access the data.
7. Entretien
7.1. Nettoyage
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor vents or ports.
7.2. Remplacement de la batterie
Remplacez les piles lorsque le témoin de batterie faible s'affiche. Suivez les étapes d'installation des piles décrites dans la section 5.1.
7.3. Stockage
When not in use for extended periods, remove the batteries and store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
8. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'appareil ne s'allume pas. | Piles mortes ou mal installées. | Vérifiez la polarité des piles ; remplacez-les par des piles neuves. |
| No data is being logged. | Device not powered on; memory full; logging paused. | Ensure device is on; download data to clear memory; check software settings for logging status. |
| Display shows 'Err' or abnormal readings. | Sensor malfunction; out of range conditions. | Move device to a stable environment; contact support if error persists. |
| Cannot download data via USB. | Incorrect cable; driver issue; software not installed. | Ensure correct USB cable; install necessary drivers/software from Dickson website. |
| L'alarme ne sonne pas. | Alarm disabled; volume too low; thresholds set incorrectly. | Check alarm settings (Section 6.4); ensure alarm is enabled and thresholds are appropriate. |
9. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | TM320 |
| Plage de température | -4 à 158°F (-20 à 70°C) |
| Taux d'humidité | 0-95 % HR (sans condensation) |
| Fabricant | Dickson Unigage Inc. |
| Dimensions du produit | 19.56 x 16.51 x 8.89 cm (7.7 x 6.5 x 3.5 pouces) |
| Poids du produit | 385.55 g (0.85 lb) |
| Transfert de données | USB, Flash Card (SD) |
| Afficher | ACL géant |
10. Garantie et assistance
This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Dickson website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Dickson customer service through their official channels.
Dickson Official Website: www.dicksonlogger.com
