Introduction
This manual provides essential information for the safe and effective use of your Maxell SR621SW Silver Oxide Watch Battery. The Maxell SR621SW is a 1.55V silver oxide button cell battery, designed for low-drain applications such as quartz watches, medical devices, and keyless remote entry systems. Maxell batteries are manufactured with a focus on environmental responsibility, featuring a 0% mercury content.
Key features include a lightweight design, high-energy density, stable discharge characteristics, and a leakage resistance design for reliable performance.
Instructions d'installation
Proper installation is crucial for the performance and longevity of your device and battery. Always refer to your device's specific instruction manual for detailed battery replacement procedures.
- Préparez votre espace de travail : Work in a clean, dry, and well-lit area. Use non-metallic tools if possible to avoid short-circuiting the battery.
- Identifier le compartiment de la batterie : Locate the battery compartment on your device. This is typically on the back or side of watches, or within the casing of other small electronics.
- Retirer l'ancienne batterie : Carefully open the battery compartment. Note the orientation of the old battery (positive (+) and negative (-) terminals). Gently remove the old battery. Dispose of used batteries responsibly according to local regulations.
- Insérer une nouvelle batterie : Handle the new Maxell SR621SW battery by its edges to avoid touching the flat surfaces, as oils from your skin can affect conductivity. Insert the new battery with the correct polarity, matching the orientation of the old battery. The positive (+) side is usually marked on the battery and/or the device.
- Compartiment sécurisé : Close the battery compartment securely. Ensure any seals or covers are properly re-seated to maintain water resistance (if applicable to your device).
- Appareil de test : Allumez votre appareil pour vérifier que la batterie est correctement installée et fonctionne correctement.
Image: Maxell SR621SW Silver Oxide Watch Battery in its original blister packaging. The packaging clearly displays the model number 364 SR621SW, 1.55V, and indicates "Made in Japan" and "0% Hg" (mercury-free).
Opération
Once correctly installed, the Maxell SR621SW battery will provide a stable 1.55V power supply to your compatible device. This silver oxide chemistry is known for its consistent voltage output throughout its lifespan, which is ideal for devices requiring a steady power source, such as quartz watches. The battery is designed for low-drain applications, ensuring efficient and long-lasting performance in appropriate devices.
Image : Un gros plan view of the Maxell SR621SW Silver Oxide Watch Battery packaging, highlighting the "maxell" brand logo, "SILVER OXIDE", "1.55V", "Made in Japan", and the battery designation "364 SR621SW" along with the "0% Hg" mercury-free symbol.
Entretien et stockage
- Stockage: Store unused batteries in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid storing batteries near metallic objects that could cause a short circuit.
- Manutention: Do not expose batteries to water, fire, or high temperatures. Do not attempt to recharge, disassemble, or modify the battery.
- Élimination: Used batteries should be disposed of responsibly. Many communities have recycling programs for button cell batteries. Do not dispose of batteries in household waste or incinerate them. Consult local regulations for proper disposal methods.
- Sécurité: Keep batteries out of reach of children and pets. If a battery is swallowed, seek immediate medical attention.
Dépannage
If your device is not functioning after battery installation, consider the following:
- Polarité incorrecte : Ensure the battery is inserted with the correct positive (+) and negative (-) orientation as indicated by your device.
- Mauvais contact: Check that the battery is making firm contact with the device's terminals. Gently clean the terminals in the device with a dry, non-abrasive cloth if there is any visible residue.
- Problème lié à l'appareil : If the battery is correctly installed and the device still does not work, the issue may lie with the device itself rather than the battery. Consult your device's manual or a qualified technician.
- Épuisement de la batterie : Although new, batteries can sometimes be depleted if stored improperly or for extended periods. Try a fresh battery if available.
Spécifications du produit
| Numéro de modèle : | SR621SW (Replaces 364) |
| Type de pile: | Oxyde d'argent |
| Vol nominaltage: | 1.55 volts |
| Teneur en mercure : | 0 % de mercure |
| Réutilisabilité : | Usage unique |
| Poids de l'article : | 0.3 gramme |
| Dimensions du produit : | 1.97 x 0.79 x 0.79 pouce (emballage) |
| Fabricant: | Maxell |
| Code à barres : | 762022256055 |
Informations sur la garantie
Maxell batteries are manufactured to high-quality standards. Specific warranty terms and conditions for the Maxell SR621SW battery are typically provided by the retailer at the time of purchase or can be found on the official Maxell webVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
For detailed warranty information, please visit the official Maxell webconsultez le site ou contactez directement leur service client.
Assistance clientèle
For further assistance, technical inquiries, or support regarding your Maxell SR621SW battery, please contact Maxell customer service through their official website. You may also reach out to the retailer from whom you purchased the product for support related to your order.
When contacting support, please have your product model number (SR621SW) and any relevant purchase information readily available.
