1. Introduction
This manual provides essential information for the safe and effective use of your Eiko EYB 82V 360W T3-1/2 G5.3 Base Halogen Lamp. Please read these instructions carefully before installation and operation to ensure proper function and longevity of the product.
2. Consignes de sécurité
Halogène lamps operate at high temperatures and contain pressurized gas. Improper handling or use can result in personal injury or property damage. Adhere to the following safety guidelines:
- Always disconnect power to the fixture before installing, removing, or cleaning the lamp.
- Autoriser le lamp Laisser refroidir complètement avant de manipuler afin d'éviter les brûlures.
- Avoid touching the glass envelope of the lamp with bare hands. Oils from skin can create hot spots, leading to premature failure. Use a clean cloth or gloves during handling.
- Ne dépassez pas le volume spécifiétage et quoitage pour votre luminaire.
- Assurez-vous que le lamp is securely seated in its base before applying power.
- Jeter les l usagésamps according to local environmental regulations.
3. Configuration et installation
Follow these steps for proper installation of the Eiko EYB halogen lamp:
- Coupure de courant : Ensure the power supply to the fixture is completely turned off and locked out if possible.
- Refroidissement: Si vous remplacez un l existantamp, allow it to cool down for at least 15 minutes to prevent burns.
- Old Lamp Removal (if applicable): Saisissez soigneusement le vieux lamp and pull it straight out from the G5.3 base. Avoid twisting if the base is a push-in type.
- Nouveau Lamp Manutention: Handle the new Eiko EYB lamp by its ceramic base. Do not touch the glass bulb with bare hands. If the glass is accidentally touched, clean it thoroughly with rubbing alcohol and a lint-free cloth before installation.
- Insertion: Align the two pins of the Eiko EYB lamp with the holes in the G5.3 base. Gently push the lamp straight into the base until it is fully seated. Do not force the lamp.
- Rétablissement du courant : Une fois le lamp L'appareil est correctement installé ; rétablissez l'alimentation électrique du luminaire.
Un gros plan view of the Eiko EYB halogen lamp, showing its clear glass envelope, coiled tungsten filament, and the white ceramic G5.3 base with two metal pins. The base is labeled with 'EIKO EYB 82V 360W CHINA'.
4. Mode d'emploi
The Eiko EYB halogen lamp is designed for straightforward operation within compatible fixtures.
- Marche/Arrêt : Activate the fixture's power switch to turn the lamp allumé ou éteint.
- Gradation (le cas échéant) : Ce lamp is dimmable. If your fixture is equipped with a compatible dimmer switch, you can adjust the light output. Ensure the dimmer is rated for halogen lamps et le total wattage of the installed lamps.
5. Entretien
Regular maintenance helps ensure optimal performance and longevity of your Eiko EYB halogen lamp.
- Nettoyage: Si le lamp's glass envelope becomes dusty or dirty, disconnect power and allow it to cool. Gently wipe the glass with a clean, dry, lint-free cloth. For stubborn marks, use a small amount of rubbing alcohol.
- Inspection: Inspectez périodiquement le lamp for any signs of damage or discoloration. If the lamp appears dim or flickers, it may be nearing the end of its lifespan.
- Remplacement: Remplacer le lamp when it fails or when its light output significantly diminishes. Always replace with a lamp du même volumetage et quoitage (Eiko EYB 82V 360W) to ensure compatibility and safety.
6. Dépannage
If you encounter issues with your Eiko EYB halogen lamp, se référer aux problèmes et solutions courants suivants :
| Problème | Cause possible | Solution |
|---|---|---|
| Lamp ne s'allume pas | No power to fixture, loose connection, faulty lamp, faulty fixture | Check power supply, ensure lamp is fully seated, replace lamp, inspect fixture wiring |
| Lamp est faible | Lamp approchant de la fin de vie, volume incorrecttage, dirty glass | Remplacer lamp, verify fixture voltage, clean lamp verre |
| Lamp fails prematurely | Survoltage, improper handling (fingerprints), excessive vibration, faulty fixture | Vérifier le volume du luminairetage, handle with gloves, ensure stable mounting, inspect fixture |
If problems persist after attempting these solutions, consult a qualified electrician or the fixture manufacturer.
7. Spécifications
Key technical specifications for the Eiko EYB 82V 360W T3-1/2 G5.3 Base Halogen Lamp:
- Marque: Eiko
- Modèle: EYB
- Voltage: 82 volts
- Quoitage: 360 watts
- Type de lumière : Halogène
- Taille de la forme de l'ampoule : T3-1/2
- Culot de l'ampoule : G5.3
- Couleur de la lumière : Blanc brillant
- Température de couleur: 3300 Kelvin
- Luminosité: 10000 lumens
- Matériel: Tungstène
- Dimensions du produit : 1 x 1 x 2.7 pouces
- Poids de l'article : 1.6 onces
- Dossier spécial : Gradable
8. Informations sur la garantie
This product is covered by the manufacturer's standard warranty. For specific details regarding warranty terms, duration, and claims procedures, please refer to the official Eiko website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.
9. Assistance et coordonnées
For technical assistance, product inquiries, or further support, please contact Eiko customer service.
- Fabricant: Eiko
- Website: Refer to Eiko's official webConsultez le site pour obtenir les coordonnées actuelles.
- Service client: Refer to Eiko's official webConsultez le site pour obtenir les coordonnées actuelles.
