Introduction
The BELL 5146-5 Weatherproof Device Cover is designed to provide robust protection for outdoor electrical receptacles. This single-gang cover features a durable metal construction with a state-of-the-art powder-coated finish, ensuring maximum weatherability and resistance to scratches. It is specifically engineered for vertical mounting over duplex receptacles, offering reliable NEMA 3R rated protection against environmental elements.
Image : Avant view of the BELL 5146-5 Weatherproof Device Cover in gray, showing the self-closing lid and the "BELL" branding. This cover is designed for wet locations.
Consignes de sécurité
Please read and understand all safety information before installation and use. Failure to follow these instructions may result in electric shock, fire, or property damage.
- Sécurité électrique : This device cover is intended for use with 120-volt electrical systems. Ensure power is disconnected at the circuit breaker before beginning any installation work.
- Personnel qualifié: Installation should be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring practices and local electrical codes.
- Avertissement concernant la Proposition 65 : Ce produit peut vous exposer à des substances chimiques reconnues par l'État de Californie comme pouvant causer le cancer, des malformations congénitales ou d'autres troubles de la reproduction. Pour plus d'informations, consultez le site suivant : www.P65Warnings.ca.gov.
- Utilisation prévue : Use this cover only for its intended purpose of protecting outdoor duplex receptacles. Do not modify the product.
- Certification: This product is CSA Certified and UL Listed, ensuring it meets recognized safety standards.
Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- BELL 5146-5 Weatherproof Device Cover (1 unit)
- Matériel de montage (vis)
- Gasket (for weatherproof seal)
- Multi-Lingual Instructions
Configuration et installation
Follow these steps for proper installation of your weatherproof device cover:
- Débrancher l'alimentation : Before starting, turn off the power to the electrical outlet at the main circuit breaker or fuse box. Verify that the power is off using a voltage testeur.
- Remove Existing Cover (if applicable): Carefully remove any existing cover plate from the duplex receptacle.
- Préparez la surface : Ensure the mounting surface is clean, dry, and flat to allow for a proper seal.
- Positionnez le joint : Place the provided gasket over the electrical box opening. The gasket helps create a watertight seal between the cover and the mounting surface.
- Mount the Cover: Align the BELL 5146-5 device cover over the duplex receptacle and the gasket. The cover is designed for vertical mounting. Use the included installation hardware (screws) to securely fasten the cover to the electrical box. Do not overtighten the screws, as this can damage the cover or the electrical box.
- Opération de test : Once installed, ensure the self-closing lid operates smoothly and fully closes to provide weatherproof protection.
- Restaurer l'alimentation : Remettez le courant au disjoncteur.
Image: A hand holding the BELL 5146-5 Weatherproof Device Cover, illustrating its approximate dimensions for installation reference.
Mode d'emploi
The BELL 5146-5 Weatherproof Device Cover is designed for simple and effective operation:
- Accessing Receptacle: To use the electrical receptacle, simply lift the self-closing lid.
- Protection contre les intempéries : When not in use, ensure the lid is fully closed. The self-closing mechanism is designed to automatically return the lid to the closed position, maintaining the NEMA 3R weatherproof seal and protecting the outlet from rain, snow, and debris.
Entretien
The BELL 5146-5 Weatherproof Device Cover requires minimal maintenance due to its durable construction and powder-coated finish.
- Nettoyage: Periodically wipe the cover with a damp cloth to remove dirt or dust. Avoid using abrasive cleaners or solvents, as these may damage the finish.
- Inspection: Regularly inspect the cover and gasket for any signs of wear, cracks, or damage. Ensure the lid still closes securely. If any damage is observed, replace the cover to maintain weatherproof integrity.
Dépannage
Most issues with the device cover are related to installation or physical damage.
| Problème | Cause possible | Solution |
|---|---|---|
| Le couvercle ne se ferme pas complètement. | Obstruction, damaged hinge, or improper installation. | Check for debris around the hinge. Inspect the hinge for damage. Re-check installation to ensure the cover is not warped or misaligned. |
| Water inside the cover. | Damaged or improperly seated gasket, or lid not fully closed. | Ensure the gasket is properly seated and not damaged. Verify the lid closes completely. Replace gasket or cover if necessary. |
| Cover feels loose after installation. | Les vis de fixation ne sont pas suffisamment serrées. | Carefully tighten the mounting screws. Do not overtighten. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | CLOCHE |
| Numéro de modèle | 5146-5 |
| Matériel | Métal |
| Couleur | Gris |
| Dimensions du produit (L x H) | 2.94 po L x 4.94 po H |
| Taille (L x l) | 4-9/16"L x 2-13/16"W |
| Poids de l'article | 3.87 onces |
| Type de finition | Revêtement en poudre |
| Type d'installation | À visser |
| Montage | Verticale |
| NEMA | 3R |
| Certifications | Certifié CSA, homologué UL |
| Voltage | 120 volts |
| Code UPC | 050169514658 |
Garantie et assistance
Specific warranty details for the BELL 5146-5 Weatherproof Device Cover are typically provided with the product packaging or can be obtained by contacting the manufacturer directly. For product support, technical assistance, or warranty claims, please contact BELL customer service.
Manufacturer: Hubbell
For further information, you may visit the official BELL store on Amazon: BELL Store
