1. Introduction
Préface
Thank you for choosing this Intelligent Car Information System. Our product adds CarPlay and Android Auto to vehicles lacking these features, letting you use them for music, navigation, and more—all via your car's original screen. A seamless upgrade, it bridges your smartphone and in-car display, bringing familiar interfaces without altering your vehicle's factory setup. Easy to integrate, it enhances connectivity safely, turning your existing infotainment system into a smart, intuitive hub. Modernize your drive affordably, leveraging what your car already has.
Précautions de sécurité
- Installez-le uniquement par des professionnels qualifiés afin d'éviter d'endommager les systèmes électriques du véhicule.
- Disconnect car battery before installation to prevent short circuits.
- Veillez à ce que toutes les connexions soient bien fixées et isolées afin d'éviter tout risque d'incendie.
- Ne pas obstruer les airbags, la visibilité du conducteur ni les commandes du véhicule pendant l'installation.
- Évitez de modifier les systèmes de sécurité essentiels du véhicule ou le câblage.
- Utilisez les appareils connectés uniquement lorsque vous êtes à l'arrêt ; ne vous laissez jamais distraire de la conduite.
- Vérifiez régulièrement les connexions et évitez toute surchauffe pendant l'utilisation.
- Stop using immediately if unusual smells, sounds, or malfunctions occur.
- Veillez à ce que l'utilisation du produit soit conforme aux lois et réglementations routières locales.
- Keep product away from water, extreme temperatures, and direct sunlight when not in use.
2. Produit terminéview
Caractéristiques principales
The ANYFAR Wireless Carplay Android Auto Module offers a range of features to enhance your in-car experience:
- CarPlay et Android Auto sans fil : Intégrez facilement votre smartphone pour la navigation, la musique, les appels et les messages.
- Retains OEM Functionality: Utilizes your existing car screen, rotary controller, and steering wheel controls.
- Connectivité : Built-in 2.4G and 5.8G WIFI for stable connection and Bluetooth 5.0 technology.
- Options de contrôle : Operate via steering wheel controls, central control panel, touch control (if applicable to vehicle), and voice commands ("Hey Siri...").
- Navigation: Supports popular GPS navigation apps like Google Maps, Waze, and Apple Maps with live traffic information.
- Qualité audio: Built-in DSP with fully adjustable Audio EQ for optimal sound.
- Prise en charge de la caméra: Two RCA inputs for adding rear and right PAL/NTSC cameras. Supports HD 360 panoramic cameras, dynamic guidance lines, and OEM parking style.
- Installation: Plug and play, non-destructive installation, eliminating the need for wire breaks.
- Commutation du système : Easily switch between the OEM car system and the CarPlay/Android Auto interface using factory controls.
- Front/Rear/360 Input: Intelligent module supports video decoding for frontview, arrièreview (with dynamic trajectory and radar support), and 360° panoramic views.
Applicable Volvo Models
This module is compatible with specific Volvo models and years, primarily those with a 7-inch screen. Please verify your car model and year against the table below:
| Modèle de voiture | Années | Écran en pouces |
|---|---|---|
| V40 | 2015-2020 | 7" |
| V60 | 2015-2019 | |
| S60/S60L | 2015-2019 | |
| XC60 | 2015-2017 | |
| S80L | 2015-2017 |
For newer Volvo models with 9-inch screens, a different version of the module may be compatible. Please check the following compatibility:
| Modèle de voiture | Années | Écran en pouces |
|---|---|---|
| XC40 | 2017-2022 | 9" |
| XC60 | 2017-2022 | |
| XC90 | 2017-2022 | |
| S60 | 2020-2022 | |
| S90 | 2017-2022 | |
| V60 | 2020-2022 | |
| V90 | 2017-2022 |
3. Configuration et installation
Manuel d'installation
The installation of the ANYFAR module involves connecting it between your car's existing infotainment system and the factory wiring. This is a plug-and-play solution designed to be non-destructive.
Connexion généraleview:
- Connect the module to the factory power harness.
- Connect the module to the factory LVDS harness.
- Connect the original car fiber optic cable as instructed.
- Assurez-vous que toutes les connexions sont sécurisées et correctement isolées.
Réglages DIP et commutateur
After installation, configure the DIP switches on the module according to your specific car model and screen size. Refer to the table below for the correct settings:
| Modèle de voiture | Année | Taille de l'écran | Réglage DIP |
|---|---|---|---|
| V40 | 2015-2020 | 7" | 245 67 SUR |
| V60 | 2015-2019 | 7" | 2 5 SUR |
| S60/S60L | 2015-2019 | 7" | 2 5 SUR |
| XC60 | 2015-2017 | 7" | 2 5 SUR |
| S80L | 2015-2017 | 7" | 2 5 67 MARCHE |
Note: Please ensure the dial is set to "ON". After switching the DIP, restart the decoder for changes to take effect.
Arrière View Entrée de la caméra
Cette interface CarPlay prend en charge l'entrée caméra pour une vue arrière dégagéeview imagery. To connect a rear camera, follow the wiring instructions provided in the detailed PDF manual. The module supports dynamic guidance lines and OEM parking styles.
Radar and Trajectory Settings
If your aftermarket camera supports reversing trajectory lines, you can enable this feature through the system settings:
- Enter the system settings: Click "Factory mode" > "Advanced mode".
- Saisissez le mot de passe « 888888 ».
- Navigate to "MCU setup" and uncheck the "A1" option to display the reversing trajectory line.
- If using an aftermarket radar, uncheck the "A2" box.
- To connect a front camera, select the "A3" option.
- Return to the previous level and click "Restart system" for changes to take effect.
4. Mode d'emploi
Basculement entre les systèmes
To switch between your car's original OEM system and the CarPlay/Android Auto interface, long press the "Previous/Next" button on your car's central control knob.
Contrôle des boutons
The module integrates with your car's existing steering wheel and central control panel buttons for seamless operation.
Steering Wheel Button Functions
| Bouton | Opération | Fonction |
|---|---|---|
| Previous/Next Track Icon | Appui long | Switch OEM screen to interface screen OR Interface screen to the OEM screen |
| Previous/Next Track Icon | Appui court | Chanson précédente/suivante |
| Icône d'augmentation du volume | Appui court | Augmenter le volume |
| Icône de réduction du volume | Appui court | Diminuer le volume |
Central Control Panel Button Functions
| Bouton | Opération | Fonction |
|---|---|---|
| Rotary Knob (TUNE/EXIT) | Swipe/Click | Fonction de contrôle |
| Bouton de feux de détresse | Double Click Short press | Switch OEM screen to interface screen OR Interface screen to the OEM screen |
Connexion sans fil
The module uses wireless CarPlay and Android Auto, supporting audio and video separation. Before using the wireless connection, you must pair your device via Bluetooth and ensure the vehicle's audio system is set to Bluetooth music mode.
Étapes de connexion CarPlay sans fil
- Turn on your phone's Bluetooth and Wi-Fi, and keep them active.
- On your phone, search for Bluetooth devices and select the device name "CAR Audio_XXXX".
- Confirmez la demande de jumelage sur votre téléphone.
- Once paired, your phone will prompt to "Use CarPlay". Select this option.
Étapes de connexion automatique Android sans fil
- Assurez-vous que le Bluetooth et le Wi-Fi de votre téléphone sont activés.
- Go to the Bluetooth settings of the Smart Box (module).
- Pair your Android phone with the module via Bluetooth.
- After successful Bluetooth pairing, follow the on-screen prompts to complete the Android Auto connection.
Sélection de la source audio
On your iPhone, verify that the sound output source is set to the original car radio (e.g., "Volvo" or "CAR BT") for optimal audio routing.
Navigation and Voice Control
Utilize your favorite navigation apps directly on your car's screen and control functions hands-free with intelligent voice commands.
5. Spécifications
Spécifications électriques
| Paramètre | Valeur |
|---|---|
| Vol d'exploitationtage | 9-16 V, 14.4 V (nominale) |
| Température de fonctionnement | -30~+75°C |
| Power Consumption Current | 1A (rated), 3A (Max) |
| Courant de repos | Moins de 3 mA |
| Température de stockage | -30~+85°C |
| Humidité ambiante | ≤98% (at 45°C), 65±5% (rated) |
| Shutdown Current | 300mA (Clock is on) |
| Charging Current Note | ≤2A; when USB charging current >1A, the host machine should activate circuit protection to control current within 15A and avoid product burning. |
Spécifications physiques
- Poids de l'article : 0.9 kg
- Dimensions de l'emballage (L xlxh) : 26 cm x 19 cm x 11 cm
Propriétés générales
- Taille DIN : Un Din
- Écran tactile : Oui
- Type de sortie : Coloré
- Format des médias numériques : CD
- Taille de l'écran : 2.5" (refer to car model compatibility for actual screen size)
- Origine: Chine continentale
6. Dépannage
Problèmes courants et solutions
Why will the Box's Bluetooth disconnect?
The wireless CarPlay/Android Auto system establishes a Wi-Fi connection to transmit data after initial Bluetooth pairing. To avoid interference, the Bluetooth connection will intentionally disconnect. This is a normal phenomenon and does not indicate a fault.
I cannot connect CarPlay, but Bluetooth is already paired.
If you are experiencing issues connecting CarPlay despite Bluetooth being paired, please try the following:
- On your iPhone, forget the device's Bluetooth connection.
- Reset your Wi-Fi settings on your iPhone: Go to Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings.
- Attempt to pair and connect again.
Why is the wireless CarPlay not stable?
If your wireless CarPlay connection is unstable, consider these solutions:
- Emplacement des modules : Ensure the CarPlay box is not blocked by metal components in its mounted position, as this can impair Wi-Fi signal transmission.
- Canal Wi-Fi : Switch the Wi-Fi channel. Enter the CarPlay box settings: Factory Mode > Connectivity Settings > Hotspot Band > Select 1, 6, or 11, depending on your current region to find the most stable channel.
7. Conseils d'utilisation
- Vérifiez le contenu de l'emballage : Upon receiving your module, carefully check all included cables and components against the packing list to ensure everything is present for installation.
- Installation professionnelle recommandée : While designed for plug-and-play, professional installation is highly recommended to avoid damage to your vehicle's electrical system and ensure optimal performance.
- Mises à jour régulières du logiciel : Vérifiez le fabricant website (www.anyfar.com) periodically for any available firmware updates to ensure the best compatibility and performance.
8. Assistance
Assistance technique
If you encounter any technical issues or require further assistance, please contact our technical support team:
E-mail: support technique@anyfar.com
Ressources supplémentaires
A comprehensive user manual in PDF format is available for detailed instructions, including wiring diagrams and advanced settings:
