Instant Hot Water Faucet RY-013

Electric Faucet Instant Water Heater User Manual

Model: RY-013

1. Introduction

This manual provides essential information for the safe and efficient use of your new Electric Faucet Instant Water Heater. This faucet features a digital display for real-time water temperature, eliminating the need for manual temperature testing. Its straightforward design allows for direct installation on your sink, making it a convenient addition to any kitchen or bathroom.

Electric Faucet with 360° Rotatable Spout and Digital Temperature Display
Figure 1: Electric Faucet with 360° Rotatable Spout and Digital Temperature Display

2. Informations importantes sur la sécurité

Veuillez lire attentivement toutes les consignes de sécurité avant l'installation et l'utilisation. Le non-respect de ces consignes peut entraîner un choc électrique, un incendie ou des blessures graves.

  • Instantaneous products must be installed vertically upwards. Installing the product upside down will cause the machine to burn out.
  • It is forbidden to install any flow stopping device at the outlet of the faucet.
  • If the ambient temperature is below 0 °C (32°F) or if there is a risk of water freezing, the power supply must be unplugged after use, and the water supply disconnected to prevent damage.
  • The machine is started by water pressure. It is not recommended for users with non-tap water sources (e.g., water tank, water tower) or low water pressure (water tank/tower drop less than 19.69 feet).
  • Before installation, always connect the water supply first, and then power on the unit.
  • It is strictly prohibited to install the faucet sideways, upside down, horizontally, or outdoors.
  • The product has an IPX4 waterproof grade, but direct exposure to strong water jets should be avoided.
  • Ensure the electrical plug is compatible with your region's standards (EU Standard for this model).
  • The required wire section for installation is 1.5 square millimeter (0.002 sq.in.). Consult a qualified electrician if unsure.
  • This product features multiple safety protections: grounding protection, over-temperature protection, pressure relief protection, dry burning protection, leakage protection, and explosion protection.

3. Spécifications

Fonctionnalité Spécification
ModèleRY-013
CouleurBlanc
Voltage220V 50Hz
Puissance nominale3000 W
Matériel304 Stainless Steel, ABS, Ceramic
ProcessusGalvanoplastie
Norme de priseNorme européenne
Mode de prise d'eauLower Water Inlet and Side Water Inlet
StyleSingle Handle and Single Hole
RotationRotation à 360°
Méthode d'installationMontage sur le pont
Niveau d'étanchéitéIPX4
Pression d'eau applicable0.04 Mpa
Plage de température de l'eau45~55℃ / 113~131℉
Classe d'efficacité énergétiqueNiveau II
Noyau de valveNoyau de valve en céramique
Wire Section Requirements1.5 square millimeter / 0.002 sq.in.
Inlet and Outlet Pipes ModelG1/2 (22mm / 0.87in)
Longueur du cordon d'alimentation1 m / 3.28 pieds
Longueur d'affichage15 cm / 5.9 pouces
Universal Faucet Length60 cm / 23.62 pouces
Poids net0.7 kg / 1.54 lb
Poids brut0.8 kg / 1.76 lb
Taille du paquet21*11*27cm / 8.27*4.33*10.63in

4. Contenu du colis

Le forfait comprend les éléments suivants :

  • 1 x Electric Faucet with Digital Display
  • 1 x Universal Faucet (Flexible Spout)
  • 1 x English & Russian Instruction Manual
Components of the Electric Faucet, including the main unit, flexible spout, and EU power plug.
Figure 2: Included components of the Electric Faucet.

5. Installation

5.1 Vérifications préalables à l'installation

  • Verify that your water pressure meets the requirement of 0.04Mpa.
  • Ensure your electrical system provides 220V 50Hz and has a wire section of at least 1.5 square millimeter.
  • Confirm the water inlet mode suitable for your setup: Lower Water Inlet (for deck mount on sink) or Side Water Inlet (for wall or water pipe mount).

5.2 étapes d'installation

  1. Monter le corps du robinet : Depending on your chosen water intake mode, securely mount the faucet body to your sink (deck mount) or wall/water pipe. Ensure it is installed vertically upwards.
  2. Raccorder l'alimentation en eau : Connect the G1/2 (22mm/0.87in) inlet pipe to your cold water supply. Ensure all connections are tight to prevent leaks.
  3. Attach Flexible Spout: Connect the universal flexible spout to the faucet body. Ensure the sealing rings are properly seated for a secure fit.
  4. Testez le débit d’eau : Before connecting power, turn on the water supply to the faucet and check for any leaks. Allow water to flow through the faucet for a few seconds to purge air from the system.
  5. Connecter l'alimentation : Once water connections are secure and leak-free, plug the EU standard power cord into a suitable 220V 50Hz outlet.
Faucet body with EU plug and mounting hardware, illustrating components for installation.
Figure 3: Faucet components and mounting hardware.
Detail of the flexible spout connection with sealing rings for secure installation.
Figure 4: Flexible spout connection detail.

6. Fonctionnement

6.1 Réglage de la température de l'eau

The faucet features a single handle for controlling both water flow and temperature. Rotate the handle to the left for hot water and to the right for cold water. The digital display will show the real-time water temperature as it flows.

Close-up of the faucet handle showing Hot, Cold, and Stop positions.
Figure 5: Faucet handle with hot/cold/stop indicators.
Faucet with hot/cold indicator on handle and digital display showing 20°C.
Figure 6: Digital temperature display and handle position for cold water.
Faucet in use, showing water flow and digital temperature display at 45°C.
Figure 7: Faucet in use, showing hot water flow and digital temperature display.

6.2 Spout Rotation

The universal faucet spout can be rotated 360° to provide flexibility for various tasks and sink configurations.

6.3 Soft Frother

The spout is equipped with a soft frother that ensures a fine and even water flow, minimizing splashing.

7. Entretien

7.1 Nettoyage

  • Wipe the exterior of the faucet with a soft, damp chiffon et savon doux.
  • Évitez d'utiliser des nettoyants abrasifs, des solvants ou des produits chimiques agressifs, car ils peuvent endommager la finition et les matériaux.
  • Regularly clean the spout's frother to prevent mineral buildup and maintain optimal water flow.

7.2 Détartrage

In areas with hard water, mineral deposits (limescale) may accumulate over time. To descale, you can use a commercial descaling solution suitable for faucets or a mixture of white vinegar and water. Apply the solution to affected areas, let it sit for a short period, and then rinse thoroughly. For internal descaling, it is recommended to consult a professional.

8. Dépannage

Problème Cause possible Solution
No hot water or insufficient heating
  • Faible pression d'eau
  • Incorrect installation (not vertical)
  • Problème d'alimentation
  • Ensure water pressure meets 0.04Mpa.
  • Verify faucet is installed vertically upwards.
  • Vérifiez la prise électrique et le disjoncteur.
Fuite d'eau
  • Connexions desserrées
  • Joints endommagés
  • Resserrer tous les raccords d'eau.
  • Inspectez les joints et remplacez-les s'ils sont endommagés.
L'affichage numérique ne fonctionne pas
  • Pas d'alimentation électrique
  • Défaut interne
  • Vérifiez la prise électrique et le disjoncteur.
  • Contactez le service client si l'alimentation est confirmée.
Water frozen (in cold weather)
  • Ambient temperature below 0°C (32°F)
  • Unplug the unit and disconnect water supply immediately.
  • Allow to thaw naturally before reconnecting.

9. Conseils d'utilisation

  • For optimal performance and safety, ensure the faucet is always installed vertically.
  • Always connect the water supply before plugging in the power cord.
  • In extremely cold conditions, take precautions to prevent water from freezing inside the unit.
  • The digital display provides instant temperature feedback, allowing precise control over water warmth.
  • Utilize the 360° rotatable spout for maximum convenience in various kitchen or bathroom tasks.

10. Garantie et assistance

Pour toute information relative à la garantie, à l'assistance technique ou au service après-vente, veuillez consulter les coordonnées fournies par votre revendeur ou le fabricant. Conservez votre ticket de caisse comme preuve d'achat.

Documents connexes - RY-013

Préview Product Manual: Storage Rack RY-00001
Comprehensive product manual for the RY-00001 storage rack, detailing document information, manufacturer details, compliance, safety warnings, instructions for use, maintenance, disposal, and technical specifications. Provided by Yiwu ruyi e-commerce co., ltd.
Préview Product Manual: Storage Box RY-00001 - Yiwu ruyi e-commerce co., ltd
Official product manual for the Storage Box Model RY-00001, manufactured by Yiwu ruyi e-commerce co., ltd. Includes document information, product details, manufacturer and representative info, compliance, safety warnings, instructions for use, troubleshooting, maintenance, disposal, and technical specifications.
Préview Guide d'installation du robinet de cuisine à douchette extractible MACKSJÖN
Instructions d'installation étape par étape pour le robinet de cuisine à douchette extractible IKEA MACKSJÖN, y compris les outils, les pièces et les étapes d'assemblage nécessaires.
Préview Product Manual: Home Decor Ornaments (RY-00001)
Product manual for home decor ornaments (Model RY-00001) by Yiwu ruyi e-commerce co., ltd, covering safety instructions, usage, maintenance, disposal, and technical specifications.
Préview Karat EWB-02-013-03-67 Bathroom Vanity Installation Manual
Comprehensive installation guide for the Karat EWB-02-013-03-67 bathroom vanity by ESTHER, covering tools, step-by-step instructions, care, and warranty details.
Préview Manuel d'utilisation de l'enceinte Bluetooth portable Rythflo RY-BS010
Manuel d'utilisation complet pour l'enceinte Bluetooth portable Rythflo RY-BS010, couvrant la configuration, les fonctionnalités, les spécifications, le dépannage et les informations de garantie.