1. Introduction
This manual provides instructions for the Mini BFT Mitto Series 433.92Mhz Garage Door Remote Control. This wireless handheld rolling code transmitter offers stable and reliable control for various automation systems, including garage doors, gates, and other access control systems. Its compact design and wall-mounted installation options provide convenient control for residential, commercial, and industrial applications.
Figure 1: BFT 433MHz remote controls (2-button and 4-button models). Key features highlighted: Security 2.0, Remote Dominance, Control One Garage Door, Lightweight.
2. Fonctionnalités principales
- 433MHz Strong Signal: Ensures stable penetration through walls and obstacles for reliable operation.
- 12V DC Powered: Low power consumption design for long-lasting and dependable performance.
- Conception murale : Offers flexible installation options for convenience.
- Compatibilité multi-appareils : Compatible with a variety of receiving systems.
- Construction solide : Built with durable materials for extended lifespan.
- Appariement facile : Simple and quick process to pair with compatible devices.
3. Compatibilité
The BFT Mitto Series remote control is compatible with the following BFT brand garage door and roller blind door remote control models:
- Mitto 2 / Mitto 4
- Mitto B RCB 02 / Mitto B RCB 04
- Kleio B RCA 02 / Kleio B RCA 04
- TRC1 / TRC2 / TRC4
- Mitto2M / Mitto4M
Figure 2: Compatibility diagram showing the BFT remote control with various compatible BFT remote models.
4. Installation et programmation
Follow these instructions carefully to program your new remote control with your receiver system. There are two common programming types:
Figure 3: Programming instructions for Type 1 (physical buttons) and Type 2 (digital display) receivers.
Type 1 Programming (Physical Buttons)
- Ouvrez le casing of your receiver. It is located next to your motor.
- On the receiver circuit board, press the programming button (SW1). The LED light of the receiver blinks. Let the button go.
- Press both buttons on your new remote control at the same time. Let them go. The LED light of the receiver remains lit fixedly.
- Press the left button on your new remote control. Let it go. The LED light of the receiver blinks.
- Wait 5 seconds. The LED light of the receiver turns off.
- Repeat this procedure for the right button of your new remote control. This time, use the programming button SW2.
- Attendez 10 secondes.
- Your new remote control is programmed.
Type 2 Programming (Digital Display)
- Press the "OK" button on your receiver twice. The screen displays "PARA."
- Press the "-" button on your receiver twice. The screen displays "RADIO."
- Press the "OK" button on your receiver once. The screen displays "ADJ STRT."
- Press the "OK" button on your receiver once. The screen displays "Hidden Button."
- Press both buttons on your new remote control at the same time. Keep them pressed down. The screen displays "Released".
- Let the buttons go. The screen displays "Desired Button".
- Press a button on your new remote control. The screen displays "OK".
- Attendez 10 secondes.
- Your new remote control is programmed.
Video 1: Demonstration of the remote control programming process with a receiver board.
5. Mode d'emploi
Once programmed, your BFT Mitto remote control is ready for use. Simply press the corresponding button on the remote to activate the linked function (e.g., open/close garage door, gate, etc.). Ensure you are within the transmission range for optimal performance.
6. Entretien
- Remplacement de la batterie : The remote control uses a 12V battery. If the remote's indicator light becomes dim or its range decreases, it's time to replace the battery. Open the remote's casing carefully to access and replace the battery, ensuring correct polarity.
- Nettoyage: Wipe the remote control with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Stockage: Rangez la télécommande dans un endroit sec, à l'abri des températures extrêmes et de la lumière directe du soleil.
7. Dépannage
- La télécommande ne répond pas :
- Vérifiez la batterie. Remplacez-la si nécessaire.
- Ensure you are within the effective transmission range.
- Verify that the remote is correctly programmed to the receiver. If unsure, repeat the programming steps.
- Portée réduite :
- Remplacez la batterie.
- Check for any new obstructions between the remote and the receiver.
- Ensure there is no interference from other 433MHz devices.
8. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Fréquence de travail | 433 MHz |
| Vol de travailtage | 12 V CC |
| Distance de transmission | Up to 100m (open environment) |
| Méthode d'installation | Conception murale |
| Type de batterie | 12V battery (commonly used) |
| Méthode d'encodage | Code tournant |
| Dimensions (L x l x H) | 64 mm (2.52 po) x 40 mm (1.57 po) x 16 mm (0.63 po) |
Figure 4: Dimensions of the BFT remote control.
9. Scénarios d'application
The BFT Mitto Series remote control is versatile and can be used in various applications:
- Systèmes de maison intelligente
- Access Control Barrier Gates
- Systèmes de contrôle d'éclairage
- Industrial Equipment Control
- Systèmes de sécurité
- Commande de porte de garage
- Machines agricoles
- Main Gates, Fences, Sliding Doors, Railings
Figure 5: Common applications for the remote control.
Figure 6: Additional application examples for the remote control.
10. Contenu du colis
Le forfait comprend:
- 1 x télécommande sans fil
Figure 7 : Example of the 4-key remote control with keychain.
11. Conseils d'utilisation
Aucun conseil spécifique aux utilisateurs n'était disponible auprès de reviewQuestions et réponses concernant ce produit.
12. Garantie et assistance
For any questions, technical support, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.