1. Introduction
Welcome to the world of high-performance gaming with the MAMBASNAKE M5 Ultra Carbon Fiber Wireless Gaming Mouse. Engineered for competitive play, this ultra-lightweight mouse combines cutting-edge technology with ergonomic design to provide an unparalleled gaming experience. Featuring a PixArt PAW3950MAX sensor, an 8000Hz wireless polling rate, and versatile tri-mode connectivity, the M5 Ultra is designed for precision, speed, and durability.
2. Guide de configuration
2.1 Contenu du paquet
Avant de commencer, veuillez vous assurer que tous les articles sont présents dans votre colis :
- MAMBASNAKE M5 Ultra Gaming Mouse
- Câble USB-C
- Clé USB 8K
- Manuel de l'utilisateur (ce document)
- PTFE Skates (pre-installed or spare)
- Ruban adhésif pour souris
2.2 Connexion de votre souris
The M5 Ultra supports three connection modes: 2.4Ghz Wireless, USB-C Wired, and Bluetooth.
- Mode sans fil 2.4 GHz :
- Locate the 2.4Ghz/Wired/BT switch on the bottom of the mouse.
- Set the switch to '2.4G'.
- Plug the included 8K Dongle into an available USB port on your computer.
- La souris devrait se connecter automatiquement.
- Mode filaire USB-C :
- Connect one end of the USB-C cable to the mouse and the other end to a USB port on your computer.
- Set the switch on the bottom of the mouse to 'Wired'.
- La souris fonctionnera en mode filaire et se rechargera simultanément.
- Mode Bluetooth:
- Set the switch on the bottom of the mouse to 'BT'.
- Sur votre ordinateur ou appareil, accédez aux paramètres Bluetooth et recherchez de nouveaux appareils.
- Select 'MAMBASNAKE M5 Ultra' from the list to pair.
2.3 Charge initiale
For optimal performance, it is recommended to fully charge the mouse before first use. Connect the mouse via the USB-C cable to your computer or a USB power adapter. The mouse's LED indicator will show charging status (refer to the LED indicator section in Operating for details).
2.4 Driver Software
The M5 Ultra features an integrated web-based driver, eliminating the need for downloads. Access the customization software via the official Mambasnake website: bitl.to/4RbV. This allows for full customization of settings.
3. Mode d'emploi
3.1 Mouse Layout and Basic Functions
- Boutons gauche/droit : Standard click functions. Equipped with Omron Microswitches for 100 million clicks lifespan and 2x faster response.
- Bouton central/Molette de défilement : Scroll up/down, middle click. Features F-Switch E10 Premium Encoder for precise stepping.
- Bouton de réglage DPI : Located on the bottom of the mouse. Press to cycle through preset DPI levels.
- 2.4G/Wired/BT Switch: Located on the bottom of the mouse, used to select the desired connection mode.
3.2 Personnalisation avancée (Web Conducteur)
Utilisez le web-based driver software to personalize your M5 Ultra:
- Paramètres DPI : Adjust DPI levels from 50 to 42,000.
- Key Binding: Program buttons for specific functions or macros.
- Éditeur de macros : Create and manage complex macro sequences.
- Paramètres de performances : Fine-tune polling rate (125-8000Hz), debounce time, lift-off distance (LOD), and sleep time.
- Dongle LED: Control the LED indicator on the 8K dongle.
3.3 8000Hz Wireless Polling Rate
The M5 Ultra's 8000Hz wireless polling rate provides an ultra-low latency of 0.125ms, ensuring precise and responsive cursor movement. This significantly reduces input lag for a competitive edge in fast-paced games.
4. Entretien
4.1 Nettoyage de votre souris
- Utilisez un chiffon doux et non pelucheux légèrement dampened with water or a mild cleaning solution to wipe the mouse surface.
- Évitez d'utiliser des produits chimiques agressifs, des abrasifs ou des solvants.
- For the sensor, use a cotton swab lightly dampened with isopropyl alcohol to gently clean the optical lens.
- Veillez à ce qu'aucun liquide ne pénètre dans les composants internes de la souris.
4.2 PTFE Skates
The M5 Ultra comes with high-quality PTFE skates for smooth gliding. Over time, these may wear down. Replacement PTFE skates are included in the package. To replace:
- Gently peel off the old PTFE skates using a thin tool.
- Clean the surface where the skates were attached to remove any adhesive residue.
- Carefully apply the new PTFE skates, ensuring they are aligned correctly.
4.3 Entretien de la batterie
- Évitez de décharger complètement la batterie fréquemment.
- Rangez la souris à température ambiante lorsqu'elle n'est pas utilisée pendant une période prolongée.
- N’exposez pas la souris à des températures extrêmes.
5. Dépannage
5.1 Problèmes de connectivité
- Sans fil 2.4 GHz :
- Ensure the 8K Dongle is securely plugged into a working USB port.
- Verify the mouse switch is set to '2.4G'.
- Essayez un autre port USB ou redémarrez votre ordinateur.
- Assurez-vous qu'aucune source d'interférences importantes (par exemple, d'autres appareils sans fil) ne se trouve à proximité.
- Bluetooth :
- Ensure the mouse switch is set to 'BT'.
- Check your device's Bluetooth settings to ensure it's enabled and the mouse is paired.
- Si la souris est déjà appariée, essayez de la dissocier puis de l'appairer à nouveau.
- Câble USB-C :
- Ensure the USB-C cable is securely connected to both the mouse and your computer.
- Verify the mouse switch is set to 'Wired'.
- Essayez un autre port USB ou un autre câble.
5.2 Performance Issues (Lag, Tracking)
- Batterie faible : Chargez complètement la souris.
- Capteur sale : Nettoyez le capteur optique comme décrit dans la section Maintenance.
- Surface Issues: Utilisez la souris sur une surface propre et uniforme ou sur un tapis de souris de haute qualité.
- Paramètres du logiciel : Vérifiez le web-based driver for incorrect DPI, polling rate, or debounce time settings.
5.3 Web Driver Not Detecting Mouse
- Ensure the mouse is connected to your computer (preferably via wired mode or 2.4Ghz with the dongle).
- Rafraîchir le web page or try a different browser.
- Redémarrez votre ordinateur et réessayez.
6. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Nom de marque | MAMBASNAKE |
| Modèle | M5 |
| Taper | Sans fil 2.4 GHz |
| Matériau du boîtier | Carbon fiber composites |
| Poids | 39 (±3) grams |
| Capteur | PixArt PAW3950MAX |
| MCU | Nordic 52840 Chip |
| DPI | 50 42,000 à XNUMX XNUMX (réglable) |
| Vitesse accélérée | 50 G |
| Vitesse de déplacement | 750IPS |
| Taux de sondage | 125-8000 Hz (réglable) |
| Encodeur | F-Switch E10 Premium Encoder |
| Interrupteurs | Omron Microswitches (100 Million Clicks) |
| Connexion | 2.4G Wireless/Bluetooth/Wired |
| Taille | 119.5*61*36.3 mm |
| Batterie incluse | Oui |
| Produit chimique hautement préoccupant | Aucun |
| Logiciel pilote | Mambasnake Official Website: bitl.to/4RbV |
7. Conseils d'utilisation
- Optimiser le taux de sondage : While 8000Hz offers the lowest latency, some systems or games might perform better at lower polling rates (e.g., 1000Hz). Experiment with settings in the web driver to find your optimal balance.
- Customization for Games: Utilize the macro and key binding features in the web driver to create game-specific profiles for quick access to in-game commands.
- Gestion de la durée de vie de la batterie : Adjust the 'Sleep Time' setting in the web driver to conserve battery during periods of inactivity.
- Grip Tape Application: For enhanced grip and control, apply the included mouse grip tape to your preferred areas on the mouse.
8. Garantie et assistance
For warranty information, technical support, and further assistance, please refer to the official MAMBASNAKE website or contact their customer service directly. The web-based driver software is regularly updated, so ensure you visit the official website (bitl.to/4RbV) for the latest features and firmware updates.
Video 1: Official product showcase of the MAMBASNAKE M5 Ultra Carbon Fiber Lightweight Mouse, highlighting its features and design.





