60V 20A 1200W Buck Converter CC CV Step-Down Module User Manual

1. Introduction

This document provides comprehensive instructions for the installation, operation, and maintenance of the 60V 20A 1200W Buck Converter CC CV Step-Down Module (Model: XY6020L). This high-performance module is designed for durability and features CNC control for constant-voltage and constant-current regulation, a full-view dedicated power LCD for clear display, and support for serial communication via the standard MODBUS protocol. It offers precise control and stable performance for various power supply applications.

Figure 1: XY6020L Buck Converter with main board, display, and WiFi module.

2. Spécifications du produit

Figure 2 : Paramètres détaillés du produit et mécanismes de protection.

Mécanismes de protection :

• External Temperature Protection (ETP): 0-110°C (default: off)
• Survol d'entréetage-Protection (OVP) : Par défaut 71V
• Sous-volume d'entréetage Protection (LVP) : 4.8-71V (adjustable; default: 4.8V)
• Survol de sortietage-Protection (OVP) : 0-65V (default: 65V)
• Protection contre les surintensités de sortie (OCP) : 0-22.0A (adjustable; default: 22.0A)
• Output Over-Power Protection (OPP): 0-1250W (default: 1250W)
• Protection contre la surchauffe (OTP) : 60-110°C (default: 95°C)
• Protection contre le dépassement de délai (OHP) : 0-100h (adjustable; default: off)
• Protection contre les surcharges (OAH) : 0-9999Ah (adjustable; default: disabled)
• Super Energy Protection (OPH): 0-9999Wh (adjustable; default: disabled)

3. Produit terminéview et composants

Figure 3: Main board component layout.

The XY6020L Buck Converter consists of a main control board and a separate LCD display module. Key components and features include:

• Carte de commande principale : Features solid material input common mode inductor for low wave output, an intelligent temperature-controlled fan, and a large area heat sink for efficient cooling.
• Bornes d'entrée: Positive input terminal (VIN+) and Negative input terminal (VIN-).
• Bornes de sortie: Positive output pole (OUT+) and Negative output pole (OUT-).
• Commutateur d'alimentation : A hard switch (OFF/ON) to power the module on or off.
• Serial Port Communication Port: For connecting to external communication modules.
• Connexion d'affichage : Connects the main board to the LCD display module.
• Key Press Connection: For external control buttons.
• 10K NTC External Temperature Sensor Port: For external temperature monitoring.
• Commutateur DIP: Used to set a fixed output voltage when the base plate is used independently.
• LCD Display Module: Provides real-time display of voltage, current, power, capacity, energy, and time. Includes V/A, SW, and ON/OFF buttons, and an encoder knob for adjustments.

Figure 4: Product dimensions for the main board and display module.

Dimensions du produit :

• Conseil principal: 109 mm (longueur) x 72 mm (largeur) x 42 mm (hauteur)
• Module d'affichage : 79 mm (longueur) x 43 mm (largeur) x 27 mm (hauteur)
• Line Length (connecting display to board): 20cm
• Poids du produit : Base plate 183g + head module 43g + wire 2g x 2 = 230g in total

4. Installation

4.1. Installation physique

Ensure the module is installed in a well-ventilated area to allow for proper heat dissipation, especially when operating at higher power levels. Use the provided dimensions for creating an appropriate enclosure or mounting solution.

Figure 5: Suggested installation opening size for the display module.

Suggested Opening Size for Display Module:

• Overall Cutout: Environ 100 mm x 64 mm
• Profondeur: Approximately 39mm (with a 12mm lip)

4.2. Connexions de câblage

Connectez le volume d'entréetage source to the VIN+ and VIN- terminals. Connect your load to the OUT+ and OUT- terminals. Ensure correct polarity to prevent damage to the module and connected devices.

4.3. DIP Switch for Fixed Voltage Sortie

The base plate can be used independently for output current 0-20A. The DIP switch on the main board allows setting fixed output voltages. This is useful if you do not need the numerical control display for voltage réglage.

Figure 6: DIP switch truth table for fixed output voltaget.

Volume de sortie fixetage Settings via DIP Switch:

• NC (Numerical Control Gear): This gear must be set when using the dial head numerical control to adjust pressure.
• 5V, 9V, 12V, 24V, 36V, 48V, 60V: Specific combinations of DIP switch positions (1, 2, 3) correspond to these fixed voltages. Refer to Figure 6 for the exact settings.

Note: If other special voltages are required, please contact customer service for customization.

5. Fonctionnement

5.1. Réglage du volumetage et courant

Figure 7: Setting voltage (CV) and current (CC) on the display module.

1. Dans l'interface de commande, appuyez sur VIRGINIE button to enter the setting voltage and current interface.
2. The LCD downlink display ENSEMBLE, CV flashes, indicating voltagla sélection.
3. Appuyez sur le SW button or rotate the encoder to switch to current selection (CC clignote).
4. Ajustez le volume souhaitétage or current value by rotating the encoder knob.
5. Appuyez sur le VIRGINIE button again to exit and save the settings to the operating interface. Alternatively, long press the VIRGINIE button for 2 seconds or wait for 6 seconds without any key operation. The system will automatically exit and save the settings.

5.2. Quick Setting of Voltage ou Actuel

Figure 8: Quick setting options for voltage (CV) or current (CC).

In the parameter setting interface (see Section 5.4), set the parameter FET à CV or CC. Then, rotate the encoder in the operation interface to quickly set the voltage ou courant.

5.3. Input and Output VoltagAffichage

Figure 9: Displaying input voltage (IN) and output parameters.

Appuyez sur le SW button on the running interface to switch between the input voltage display and the output voltage/current/power display.

5.4. Parameter Setting Interface

Figure 10 : Plusview of the parameter setting interface.

1. Sur l'écran de course, maintenez la touche enfoncée. SW Appuyez sur le bouton pendant 2 secondes pour accéder à l'écran de paramétrage.
2. Presse SW to switch the parameters to be set. Rotate the encoder to adjust the parameters.
3. On the interface of Maximum Capacity (OAH)/Maximum Energy (OPH)/Maximum Running Time (OHP), press the MARCHE/ARRÊT button to enable or disable the corresponding function. If the function is disabled, "----" will be displayed.
4. On the Maximum Capacity (OAH)/Maximum Energy (OPH) screen, hold down the MARCHE/ARRÊT button to select the capacity range (e.g., 9.999Ah, 99.99Ah, 999.9Ah, 9999Ah, 9.999Wh, 99.99WH, 999.9WH, 9999Wh).
5. Une fois le paramétrage terminé, maintenez enfoncé le bouton SW Appuyez sur le bouton pendant 2 secondes pour quitter l'écran des paramètres. Les paramètres sont enregistrés automatiquement.

5.5. View Power (W)/Capacity (Ah)/Energy (Wh)/Time (h)

Figure 11: Switching between different display modes for output statistics.

Dans l'interface de fonctionnement, appuyez sur le bouton de l'encodeur pour basculer l'affichage entre la puissance (W), la capacité (Ah), l'énergie (Wh) et le temps (h).

5.6. Fonction de verrouillage

To prevent misoperation, you can lock the voltage et les paramètres actuels.

Figure 12: Display lock symbol indicating activated locking function.

Dans l'interface de fonctionnement, appuyez longuement sur le bouton de l'encodeur pendant 2 secondes pour verrouiller le vol.tage and current set. A lock symbol will appear on the display. After locking, long press the encoder button for 2 seconds to unlock.

5.7. Fonction de groupe de données

This product has 10 sets of data from Cd0 to Cd9. Data for Cd8=12V and Cd=24V cannot be adjusted. The data is saved in Cd0 by default.

Figure 13: Data group function interface showing setting voltage, current, and data group number.

1. Appuyez longuement sur le VIRGINIE Appuyez sur la touche pendant 2 secondes pour accéder à l'interface d'appel du groupe de données. Les deux lignes supérieures affichent le volume défini.tage value (CV) and set current value (CC) of the data group, and the number of the downstream display group is CD1-CD9.
2. Appuyez sur le VIRGINIE touche pour basculer entre les réglages de volumetage CV, réglage du courant CC et numéro de série de l'ensemble de données Cd. Modifiez la valeur du paramètre via l'encodeur.
3. After confirmation of the data group, long press VIRGINIE to pull out the data group and return to the operation interface.

5.8. Other Functions (Capacity/Energy/Running Time Statistics)

Figure 14: Explanation of capacity, energy, and running time statistics and settings.

8.1 Capacity/Energy/Running Time Statistics:

• After the power is turned ON, the statistics will be automatically started.
• After the power is turned OFF, the value of the previous state will be displayed.
• After the power is turned ON again, the record will be automatically restarted.
• On the corresponding screen, press and hold the MARCHE/ARRÊT key for 2 seconds to automatically clear the corresponding data.

8.2 Setting the Maximum Capacity (OAH), Maximum Energy (OPH), and Maximum Running Time (OHP):

• Setting OAH/OPH: When the OAH/OPH function is started and the statistical capacity/energy is higher than the set maximum capacity/energy, the power supply automatically shuts down the output and flashes "OAH" / "OPH". After the alarm is removed, the capacity/energy statistics will be cleared automatically.
• Setting OHP: After the OHP function is enabled, when the running time of the power supply is greater than the set maximum discharge time, the power output will be automatically turned off and "OHP" will blink. After the OHP alarm is lifted, the time statistics will be cleared automatically.

Cette fonction permet d'obtenir une bonne alimentation quantitative/synchronisée.

Note: When OAP/OPH and OHP functions are not enabled, the power supply will automatically record the capacity/energy and running time. After OAH/OPH and OHP functions are enabled, the power supply will automatically shut down the output after reaching the set value. After OHP function is enabled, the running time of power supply is countdown mode.

6. WiFi Module and APP Control

The XY6020L supports an optional WiFi module for remote control and monitoring via a mobile app or web interface. This allows for multi-machine communication and integration with smart home systems.

Figure 15: WiFi module and its features.

6.1. WiFi Module Features:

• Contrôle de l'application mobile
• PC upper computer control
• LAN real-time communication
• External network control and viewing
• Support multi-machine communication
• Support Tmall Genie, Baidu Voice, Xiao Ai voice control switch
• Open source design

6.2. Sinilink Power System Communication Diagram:

Figure 16: Communication diagram showing Extranet (cloud) and Local Area Network (LAN) control options.

6.3. Mobile APP and PC Client Interface:

Figure 17 : Examples of the mobile app and PC client interfaces for control and monitoring.

6.4. How to Connect WiFi:

Download the Sinilink app from your app store (search "Sinilink"). For PC software, download from http://www.sinilink.com/download/tools/Sinilink-Setup.exe.

WiFi Connection Steps (AP Mode):

1. Power off the equipment and then turn on the power.
2. Press and hold the pairing button on the WiFi module for 5 seconds. The indicator light should flash four times with an interval of 1 second.
3. Press and hold the pairing button for 5 seconds again to confirm the flash of the indication point.
4. Verify that the indicator flashes correctly.
5. On your mobile phone, connect to the WiFi network named "Sinilinkproduct". The password is usually "12345678".
6. Return to the Sinilink app, enter the device name and choose its classification.
7. Start the connection process within the app.
8. Once connected, you can control and monitor the device via the app.

7. Entretien

• Nettoyage: Keep the module clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquids or abrasive cleaners.
• Ventilation: Ensure the cooling fan and heat sink are not obstructed to maintain proper airflow and prevent overheating.
• Relations: Vérifiez régulièrement tous les branchements électriques pour vous assurer qu'ils sont bien fixés et exempts de corrosion.
• Stockage: When not in use for extended periods, store the module in a dry, cool environment.

8. Dépannage

• Pas de volume de sortietage/Actuel :
  • Check input power supply. Ensure it is within the 6.0-70V DC range. This device is a buck converter and requires a DC input, not AC.
  • Verify that the output is enabled (ON/OFF button on the display).
  • Check for active protection mechanisms (OVP, OCP, OPP, OTP, LVP). If a protection is triggered, the output may be shut off. Refer to Section 5.4 for parameter settings and protection thresholds.
  • Assurer le volume de sortietage and current are set correctly (refer to Section 5.1).
• Vol incorrecttage/Lecture en cours :
  • Check wiring for loose connections or incorrect polarity.
  • Ensure the measurement accuracy specifications (Table 1) are considered.
• Surchauffe du module :
  • Verify that the cooling fan is operating when conditions (current > 2A, power > 50W, temperature > 50°C) are met.
  • Ensure the heat sink is clear of obstructions and there is adequate ventilation.
  • Reduce the load or input voltage if operating continuously at high power.
• Difficulty Adjusting Voltage/Actuel :
  • Assurez-vous que l'écran n'est pas verrouillé (reportez-vous à la section 5.6).
  • Follow the steps in Section 5.1 carefully for setting parameters.
• Problèmes de connexion WiFi :
  • Vérifiez que le module WiFi est correctement installé et alimenté.
  • Follow the AP mode connection guidance in Section 6.4 precisely.
  • Verify your router supports 2.4GHz WiFi, as the module typically uses this frequency.
  • Check that local network permissions are enabled on your mobile device.

9. Conseils d'utilisation

• Verify Input Power: Always double-check your input voltage and current capabilities before connecting to the buck converter. This device is a step-down converter, meaning the output voltage will always be lower than the input voltage. It cannot boost voltage.
• Câblage approprié : Ensure all wiring is secure and correctly polarized. Loose connections can lead to unstable operation or damage.
• Le refroidissement est essentiel : For applications requiring high current or power output, ensure the module has sufficient cooling. The integrated fan helps, but additional ventilation might be necessary in enclosed spaces.
• Utilize Data Groups: The 10 data groups (Cd0-Cd9) are very useful for quickly switching between frequently used voltage and current settings. Configure them for your common tasks.
• Paramètres de verrouillage : Use the locking function (Section 5.6) to prevent accidental changes to your voltage and current settings, especially in critical applications.
• Surveillance à distance : If using the WiFi module, take advantage of the mobile app or PC client for remote monitoring and control, which can be very convenient for testing or long-term projects.

10. Garantie et assistance

For warranty information, technical support, or inquiries regarding replacement parts (such as the display module), please contact your seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.