Introduction
The 1Mii B06T3 Bluetooth 6.0 Receiver is designed to transform your traditional wired home stereo systems, wired speakers, or audio systems into wireless Bluetooth-enabled devices. This allows you to stream high-quality audio from any Bluetooth-enabled device, such as a smartphone or tablet, without needing to replace your existing audio equipment.
Caractéristiques principales :
- Connectivité Bluetooth 6.0 : Provides a stable and reliable wireless connection for uninterrupted audio streaming.
- Intuitive Rotary Knob Control: Easily adjust volume, play/pause music, and skip tracks directly on the receiver.
- Portée sans fil étendue : Enjoy streaming up to 98 feet (30 meters) for greater freedom of movement.
- Fonctionnalité Dual Link : Connects to two Bluetooth devices simultaneously, allowing seamless switching between audio sources.
- Compatibilité universelle: Equipped with both RCA and 3.5mm AUX outputs for broad compatibility with various audio systems.
- Non-Battery Design: Operates via a wired power connection for continuous use and long-term durability.
Qu'y a-t-il dans la boîte
Veuillez vérifier le contenu du colis pour vous assurer que tous les éléments sont présents :
- 1Mii Bluetooth Receiver (B06T3)
- Câble d'alimentation USB
- Adaptateur secteur
- Câble audio 3.5 mm vers RCA
- Manuel d'utilisation
Image: The 1Mii B06T3 Bluetooth Receiver and its included accessories.
Video: A demonstration of the contents included in the 1Mii B06T3 package.
Instructions d'installation
1. Connect the Receiver to Your Audio System
- Mise sous tension : Plug the included USB power cable into the 1Mii B06T3 receiver and connect the other end to the power adapter. Plug the power adapter into a wall outlet. The receiver will power on automatically.
- Connexion audio : Use the provided 3.5mm to RCA audio cable to connect the 1Mii B06T3 receiver to your home stereo system or wired speakers.
- For RCA input: Connect the red and white RCA plugs from the cable to the corresponding red and white audio input jacks on your stereo/speakers. Connect the 3.5mm end to the AUX OUT port on the B06T3.
- For 3.5mm AUX input: Connect a 3.5mm audio cable (not included, if not using RCA) from the AUX OUT port on the B06T3 to the 3.5mm AUX IN port on your speakers or stereo.
Image: Visual guide for connecting the 1Mii B06T3 to an audio system.
Video: Instructions on how to connect two wired speakers using the B06T3 receiver.
2. First-Time Bluetooth Pairing
- When powered on for the first time (no pairing history), the B06T3 will automatically enter pairing mode. The LED indicator will flash red and blue alternately.
- Sur votre appareil compatible Bluetooth (par exemple, smartphone, tablette), accédez aux paramètres Bluetooth.
- Rechercher available devices and select "B06T3" from the list.
- Once successfully connected, the LED indicator on the B06T3 will remain solid blue.
Image: Visual steps for pairing a Bluetooth device with the 1Mii B06T3.
Video: A guide on how to use the B06T3 Bluetooth receiver, including initial setup.
Mode d'emploi
Commandes de base
The 1Mii B06T3 features an intuitive multi-function knob for easy control:
- Réglage du volume : Rotate the multi-function knob clockwise to increase volume, counter-clockwise to decrease volume.
- Lecture/Pause : Press the multi-function button once while music is playing to pause, and press again to resume playback.
- Piste suivante : Double-press the multi-function button to skip to the next track.
- Piste précédente: Triple-press the multi-function button to go back to the previous track.
Image : détaillée view of the precise knob control for the 1Mii B06T3.
Connexion d'appareils doubles
The B06T3 can connect to two Bluetooth devices simultaneously, allowing for seamless switching between audio sources.
- Connect the first device as described in the "First-Time Bluetooth Pairing" section. The LED will be solid blue.
- To pair a second device, press and hold the multi-function button for 2 seconds to enter pairing mode again. The LED will flash red and blue alternately.
- On your second Bluetooth-enabled device, search for "B06T3" and select it to pair.
- Once the second device is successfully paired, the first device will disconnect automatically. The LED will flash purple.
- To reconnect the first device, go to its Bluetooth settings and tap "B06T3". The LED will then remain solid purple, indicating two devices are paired.
- To switch audio output, ensure playback is paused on the currently connected device before starting playback on the other.
Image: Steps for dual pairing with the 1Mii B06T3.
Video: A demonstration of how to connect two phones to the B06T3 simultaneously.
Reconnexion automatique
If there is a connection history, the device will automatically reconnect to the last paired device approximately 7 seconds after power on. If the previously connected device is not powered on, press the multi-function button to enter pairing mode.
Réinitialisation d'usine
To clear all pairing records and perform a factory reset, press and hold the multi-function button for 8 seconds. The LED will flash purple 3 times, then red and blue alternately.
Entretien
To ensure the longevity and optimal performance of your 1Mii B06T3 Bluetooth Receiver, follow these maintenance guidelines:
- Nettoyage: Use a soft, dry cloth to clean the device. Avoid using abrasive cleaners, solvents, or strong chemicals, as these can damage the surface or internal components.
- Stockage: Rangez l'appareil dans un endroit frais et sec, à l'abri de la lumière directe du soleil, des températures extrêmes et d'une forte humidité.
- Manutention: Manipulez l'appareil avec précaution. Évitez de le faire tomber ou de le soumettre à des chocs violents, qui pourraient l'endommager.
- Pouvoir: Always use the provided power adapter and cable. Using incompatible power sources may damage the device.
- Ventilation: Veillez à placer l'appareil dans un endroit bien ventilé afin d'éviter toute surchauffe.
Dépannage
If you encounter issues with your 1Mii B06T3, please refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| No power/LED indicator off | Câble d'alimentation mal connecté ou adaptateur secteur défectueux. | Ensure the power cable is securely connected to both the receiver and the power adapter, and the adapter is plugged into a working outlet. Try a different outlet. |
| Impossible de coupler avec un appareil Bluetooth | Receiver not in pairing mode; Bluetooth on source device is off or already connected to another device; too many devices in range. | Press and hold the multi-function button for 2 seconds until the LED flashes red and blue alternately. Ensure Bluetooth is enabled on your source device and disconnect it from other devices. Move closer to the receiver. |
| Aucun son après un appariement réussi. | Incorrect audio cable connection; volume too low on receiver or source device; incorrect input selected on stereo/speakers. | Verify audio cables are correctly connected to the AUX OUT of the B06T3 and the correct input on your stereo/speakers. Increase volume on both the B06T3 and your source device. Select the correct input source on your stereo/speakers. |
| Coupures audio ou mauvaise qualité | Distance from source device is too far; interference from other wireless devices; physical obstructions. | Move the source device closer to the B06T3. Reduce interference by moving other wireless devices away. Ensure there are no major obstructions between the devices. |
| Cannot connect a second device | First device not disconnected; pairing mode not re-entered. | Ensure the first device is paused or disconnected. Press and hold the multi-function button for 2 seconds to re-enter pairing mode for the second device. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | 1Mii |
| Numéro de modèle | B06T3 |
| Technologie de connectivité | Auxiliary, Bluetooth, RCA |
| Type de contrôleur | Bouton mécanique |
| Caractéristiques spéciales | Bluetooth 6.0, Dual Link, Volume Control |
| Appareils compatibles | Amplifier, Headphone, Smartphone, Speaker, Tablet |
| Type de connecteur | Prise jack 3.5 mm, RCA |
| Mode de sortie audio | Stéréo |
| Couleur | Noir |
| Dimensions du produit (P x L x H) | 2.28 po x 2.09 po x 1.26 po (5.8 cm x 5.3 cm x 3.2 cm) |
| Type de sortie audio | AUX, RCA |
| Technologie sans fil | Bluetooth |
Informations sur la garantie
The 1Mii B06T3 Bluetooth Receiver comes with a Garantie de 12 mois À compter de la date d'achat, cette garantie couvre les défauts de fabrication et les problèmes liés à une utilisation normale. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
La garantie ne couvre pas les dommages causés par une mauvaise utilisation, des accidents, des modifications non autorisées ou le non-respect des instructions de ce manuel.
Assistance clientèle
If you have any questions, require technical assistance, or need to make a warranty claim, please contact 1Mii customer support through the following channels:
- Fabricant: 1Mii
- Vendeur: ANKBIT INTERNATIONAL
- Refer to the contact information provided on the product packaging or the official 1Mii website pour les détails de support les plus récents.