Kitgody Cordless Engraving Pen User Manual

1. Introduction

Thank you for choosing the Kitgody Cordless Engraving Pen. This versatile rotary tool is designed for precision tasks such as engraving, carving, polishing, and drilling on various materials. Please read this manual thoroughly before use to ensure safe and optimal operation of your device. Keep this manual for future reference.

2. Consignes de sécurité

• Portez toujours un équipement de protection individuelle approprié, notamment des lunettes de sécurité, pour vous protéger contre les projections de débris.
• Assurez-vous que la pièce est solidement clampretenu ou maintenu pour empêcher tout mouvement pendant l'opération.
• Tenez vos mains et vos vêtements amples éloignés des pièces en rotation.
• N’utilisez pas cet outil à proximité de liquides ou de gaz inflammables.
• Avoid applying excessive pressure, which can cause the tool to stall or bits to break.
• Disconnect the tool from its power source (if charging) before changing accessories or performing maintenance.
• Rangez l'outil dans un endroit sec et sûr, hors de portée des enfants.
• Use only genuine Kitgody accessories or compatible bits designed for rotary tools.

3. Contenu du colis

This image shows the complete contents of the product package, including the main rotary tool unit, a protective tool case, two rotary tool collets, twelve grinding bits, a Type-C charging cable, two stainless steel saw blades, ten grinding discs, eight mini grinding wheels, an open-end wrench, and a storage box.

• Rotary Tool Main Unit
• outil de cas
• Rotary Tool Collets (x2)
• Grinding Bits (x12)
• Câble de charge de type C
• Stainless Steel Saw Blades (x2)
• Grinding Discs (x10)
• Mini Grinding Wheels (x8)
• Open-End Wrench (x1)
• Boîte de rangement

4. Caractéristiques et composants du produit

Cette image fournit un aperçu détaillé view of the engraving pen with labels for each major component, including the LED display, function button, charging port, heat vent, spindle lock, collet nut, and grinding bit.

• Affichage LED: Shows current speed setting and battery charge level.
• Bouton de fonction : Controls power on/off and speed adjustment.
• Port de charge de type C : Pour une recharge pratique et rapide.
• Évacuation de chaleur : Dissipates heat during operation to prevent overheating.
• Bouton de verrouillage de la broche : Engages to hold the spindle stationary for easy bit changes.
• Écrou à collet : Secures the grinding bit in place.
• Grinding Bit: Interchangeable accessory for various tasks.

Caractéristiques principales :

This image displays the internal components of the engraving pen, emphasizing its powerful 16,000 RPM motor. Key features like overheat protection, low noise, and low vibration are also indicated.

• Moteur puissant : Equipped with a motor capable of up to 16,000 RPM for efficient performance.
• Protection contre la surchauffe : Integrated safety mechanism to prevent damage from prolonged use.
• Faible bruit et vibrations : Designed for comfortable and quiet operation.

This diagram explains the importance of high concentricity for precise engraving. It shows how a stable shaft prevents wobble during operation, ensuring accurate results, compared to an unstable, wobbling bit.

• High Concentricity: Ensures accurate rotation and minimal runout for precise and consistent results.

This image demonstrates the pen's 6-speed adjustment feature, with examples of the digital display showing different RPM settings from F06 to F16, allowing for precise control over engraving tasks.

• Réglage à 6 vitesses : Offers six precision speed settings for optimal control across different materials and tasks.

5. Installation

5.1 Chargement de l'appareil

Before first use, fully charge the engraving pen. Connect the provided Type-C charging cable to the charging port on the device and plug the other end into a compatible USB power adapter (not included). The LED display will indicate the charging status. A full charge typically takes approximately 2-3 hours.

5.2 Grinding Head Installation

This step-by-step visual guide illustrates how to properly install a grinding bit. It shows pressing the spindle lock, loosening the collet nut, inserting the desired bit, and then tightening the collet nut before releasing the spindle lock.

1. Press the Spindle Lock: Locate the spindle lock button and press it firmly to prevent the spindle from rotating.
2. Loosen the Collet Nut: While holding the spindle lock, use the provided wrench or your fingers to loosen the collet nut counter-clockwise.
3. Insert the Grinding Bit: Carefully insert the shank of the desired grinding bit into the collet. Ensure the bit is inserted as far as possible for maximum stability.
4. Tighten the Collet Nut: While still holding the spindle lock, tighten the collet nut clockwise until the bit is securely held. Release the spindle lock.

6. Mode d'emploi

6.1 Mise sous/hors tension

• To turn on the device, press and hold the Function Button (power button) for approximately 2 seconds. The LED display will illuminate.
• To turn off the device, press and hold the Function Button again for approximately 2 seconds.

Réglage 6.2 vitesses

• Once the device is powered on, short press the Function Button to cycle through the 6 available speed settings. The current speed (e.g., F06, F08, F16) will be displayed on the LED screen.
• Select a lower speed for delicate tasks and softer materials, and a higher speed for more aggressive material removal or harder surfaces.

6.3 Changement du sens de rotation

• While the tool is ON, quickly double-press the Function Button to change the rotation direction of the spindle. The LED display may indicate the change (e.g., 'R' for reverse).
• This feature can be useful for specific applications or to prevent material from being thrown in a particular direction.

6.4 Conseils généraux d'utilisation

• Toujours faire un essai sur un morceau de tissu de rebut avant de travailler sur votre projet final.
• Use light, consistent pressure. Let the tool do the work.
• Keep the tool moving to avoid creating grooves or overheating the material.
• For optimal results, match the bit type and speed to the material you are working with.

This image showcases the versatility of the engraving pen across different crafting activities, including polishing nails, intricate jade engraving, detailed wood chiseling, and delicate crystal carving.

7. Entretien

• Nettoyage: After each use, wipe down the tool with a clean, dry cloth. Use a small brush to remove dust and debris from the collet area and heat vents. Do not use harsh chemicals or abrasive cleaners.
• Stockage des bits : Store grinding bits and other accessories in the provided storage box to prevent damage and loss.
• Entretien de la batterie: For optimal battery life, avoid fully discharging the battery frequently. Recharge the tool when the battery indicator is low. If storing for extended periods, charge the battery to about 50% every few months.
• Inspection: Regularly inspect the tool and bits for any signs of wear or damage. Replace worn or damaged bits immediately.

8. Dépannage

9. Spécifications

10. Garantie et assistance

Specific warranty information for the Kitgody Cordless Engraving Pen is not provided in the product details. For warranty claims, technical support, or inquiries regarding your product, please refer to the contact information provided with your purchase or visit the official Kitgody website.