SHEHDS LED 120W RGBW Wash Moving Head Light User Manual

1. Produit terminéview

The SHEHDS LED 120W RGBW Wash Moving Head Light is a versatile stage lighting fixture designed for various events. It features a powerful 120W RGBW quad-color LED source, offering smooth color mixing and dynamic effects. The unit includes a linear CTO channel for precise color temperature adjustment and a Fresnel optical lens for soft, even light output. Multiple control modes, including DMX, sound-activated, and automatic, provide flexibility for lighting designers.

Figure 1.1 : Avant et arrière view of the SHEHDS 120W RGBW Wash Moving Head Light, illustrating its color capabilities.

Caractéristiques principales :

• 120W RGBW Quad-Color LED Source: Delivers clear, powerful light with smooth color mixing and rainbow effects.
• Dynamic Color Transitions & Music Sync: Supports gradual fades or rapid switches, with sound-activated control for music synchronization.
• Linear CTO Control with CRI >90: Allows precise color temperature adjustment (2800-6500K) and accurate rendering of natural tones.
• Soft Optical Output with Fresnel Lens: Equipped with a water-ripple Fresnel lens for clean, soft, and evenly blended light.
• High-Quality Copper-Base LED: Ensures stable performance, high heat resistance, and anti-oxidation properties.

2. Consignes de sécurité

Read all safety instructions carefully before installation, operation, or maintenance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• This device is for indoor use only. Do not expose to rain or moisture.
• Assurer l'alimentation voltage correspond à la note indiquée sur l'appareil.
• Always connect the device to a grounded circuit to avoid electrical shock.
• Disconnect from power before any service, cleaning, or maintenance.
• N’utilisez pas l’appareil si le cordon d’alimentation est endommagé.
• Ensure adequate ventilation around the unit to prevent overheating. Maintain a minimum distance of 0.5 meters from walls or other objects.
• Évitez l'exposition directe des yeux à la source lumineuse.
• Fixez l'appareil en toute sécurité à l'aide d'un collier de serrage approprié.amps et câbles de sécurité.
• N’essayez pas de réparer l’appareil vous-même. Confiez toute réparation à un personnel qualifié.

3. Contenu du colis

Veuillez vérifier que tous les articles énumérés ci-dessous sont inclus dans votre colis. Si un article est manquant ou endommagé, veuillez contacter immédiatement votre détaillant.

• SHEHDS LED 120W RGBW Wash Moving Head Light (Main Unit)
• 1.2M DMX Cable x 1
• Câble d'alimentation de 1.2 M x 1
• Manuel d'utilisation x 1
• Quick Lock Bracket x 1

Figure 3.1: Illustration of the items included in the product package.

4. Configuration et installation

4.1 Installation physique

The moving head light can be mounted in various positions (e.g., truss, floor) using the provided quick lock bracket. Ensure the mounting surface or truss is capable of supporting the weight of the fixture.

• Attach the quick lock bracket securely to the bottom of the fixture.
• Mount the fixture to a truss or place it on a stable, level surface.
• Always use a safety cable (not included) when mounting the fixture overhead.

4.2 Connexions

Connect the power and DMX cables as follows:

• Connexion électrique : Use the provided power cable to connect the fixture to a suitable power outlet.
• Connexion DMX : For DMX control, connect a DMX controller to the DMX IN port using a 3-pin DMX cable. If linking multiple fixtures, connect the DMX OUT of the first fixture to the DMX IN of the next.

4.3 Initial Power-On and DMX Address Setting

After connecting power, the unit will power on. Use the control panel to set the DMX address.

• Navigate the menu using the 'MENU', 'UP', 'DOWN', and 'ENTER' buttons.
• Locate the DMX address setting option.
• Set the desired DMX address.
• Press 'ENTER' or 'OK' to confirm the setting. The DMX address will be preserved even after power cycling.

Figure 4.1: The control panel displaying various functions and monitoring options.

5. Modes de fonctionnement

The SHEHDS 120W RGBW Wash Moving Head Light offers several operating modes to suit different applications.

5.1 Mode de contrôle DMX

This mode allows professional control over all functions using a DMX512 controller. Refer to the DMX channel chart (typically found in the full manual) for specific channel assignments and values.

5.2 Mode activé par le son

In this mode, the fixture reacts to ambient sound, synchronizing light changes and movements with music beats. This mode is ideal for dynamic performances without a dedicated DMX controller.

5.3 Mode automatique

The fixture runs through pre-programmed light shows and patterns automatically. This mode is suitable for quick setup and continuous operation without external input.

5.4 Commande manuelle

Basic functions can be controlled directly from the unit's display panel. This includes selecting modes, setting DMX addresses, and adjusting certain parameters.

Figure 5.1 : Plusview of the multiple control modes available for the fixture.

5.5 Color Mixing and CTO Effect

The RGBW LEDs allow for a wide spectrum of colors. The linear CTO channel provides color temperature adjustment from 2800K (warm white) to 6500K (cool white), enabling precise environmental lighting.

Figure 5.2 : Example of RGBW 4-in-1 color mixing capabilities.

Figure 5.3: Visual representation of the CTO effect, showing adjustable color temperature.

6. Entretien

Regular maintenance ensures optimal performance and extends the lifespan of your SHEHDS Moving Head Light. Always disconnect power before performing any maintenance.

6.1 Nettoyage

• Nettoyer l'extérieur casing avec un chiffon doux et sec.
• Periodically clean the optical lens with a soft, lint-free cloth and a mild glass cleaner to maintain light output clarity.
• Ensure ventilation openings are free from dust and debris. Use compressed air if necessary.

6.2 Stockage

Lorsqu'il n'est pas utilisé, rangez le dispositif dans un endroit sec et exempt de poussière, de préférence dans son emballage d'origine ou dans un étui de protection.

6.3 Remplacement du fusible

If the unit does not power on, check the fuse located near the power input. Replace it with a fuse of the same type and rating.

7. Dépannage

Cette section aborde les problèmes courants que vous pourriez rencontrer. Pour tout autre problème, veuillez contacter le service client.

8. Spécifications

Detailed technical specifications for the SHEHDS LED 120W RGBW Wash Moving Head Light.

Figure 8.1: Product dimensions for the SHEHDS 120W RGBW Wash Moving Head Light.

9. Garantie et assistance

9.1 Informations sur la garantie

Ce produit est livré avec un Garantie constructeur d'un an from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9.2 Assistance clientèle

For technical assistance, warranty claims, or any questions regarding your SHEHDS LED 120W RGBW Wash Moving Head Light, please contact the seller or manufacturer directly. Refer to your purchase documentation for contact details.