Introduction
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your BWT ES800 Robotic Pool Cleaner. Please read this manual thoroughly before using the appliance and retain it for future reference.
Consignes de sécurité
Respectez toujours les consignes de sécurité suivantes :
- Assurez-vous que l'alimentation électrique est débranchée avant d'effectuer toute opération de maintenance ou de nettoyage.
- Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repairs.
- Tenez les enfants et les animaux domestiques éloignés de la piscine pendant le fonctionnement du nettoyeur.
- Only use the cleaner in pools with appropriate water chemistry levels.
- Do not use the cleaner to remove large debris such as leaves, twigs, or rocks, as this may damage the unit.
- Always remove the cleaner from the pool after each cleaning cycle.
Contenu du colis
Vérifiez que tous les composants sont présents dans le package :
- BWT ES800 Robotic Pool Cleaner Unit
- Bloc d'alimentation
- Floating Cable (59ft)
- Panier de filtre
- Manuel d'instructions (ce document)
Installation
1. Déballage et inspection initiale
Carefully remove all components from the packaging. Inspect the cleaner and its accessories for any signs of damage. If any damage is found, do not operate the unit and contact customer support.
2. Connexion de l'alimentation
- Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool. Ensure it is in a shaded area and protected from direct sunlight and splashing water.
- Raccordez le câble flottant de l'aspirateur au bloc d'alimentation. Assurez-vous que la connexion est bien fixée.
- Branchez le bloc d'alimentation sur une prise électrique mise à la terre.
3. Placer le nettoyeur dans la piscine
Gently lower the BWT ES800 into the pool. Allow it to sink to the bottom. Ensure that all air trapped inside the cleaner is released by gently rocking it from side to side until no more bubbles emerge. Spread the floating cable evenly across the pool surface to prevent tangling.
Image: The BWT ES800 Robotic Pool Cleaner submerged in a pool, ready for operation.
4. App Control Setup (BWT Best Water App)
The BWT ES800 features Bluetooth connectivity for app control. Download the "BWT Best Water App" from the Apple App Store or Google Play Store. Follow the in-app instructions to pair your device with the cleaner. This allows for remote control, cycle selection, and software updates.
Image: The BWT ES800 cleaner next to a smartphone displaying the BWT Best Water App interface for remote control.
Opération
1. Démarrage d'un cycle de nettoyage
Once the cleaner is submerged and powered on, you can initiate a cleaning cycle using the button on the unit or through the BWT Best Water App.
2. Cleaning Modes and Cycles
The BWT ES800 offers multiple cleaning modes and cycles to suit your pool's needs:
- Modes de nettoyage:
- Floor: Focuses cleaning on the pool floor.
- Wall & Waterline: Cleans the pool walls and waterline.
- Overall: Provides comprehensive cleaning of the entire pool (floor, walls, and waterline).
- Cycles de nettoyage : Selectable durations of 1.5 hours, 2 hours, or 2.5 hours.
The cleaner utilizes a smart navigation system with an integrated gyroscope to adapt its driving pattern to your pool's shape, ensuring complete coverage and avoiding cable tangles.
Image: The BWT ES800 cleaner ascending a pool wall, demonstrating its smart cable control and anti-entanglement system.
Image: The BWT ES800 efficiently cleaning the bottom, walls, and waterline of a pool.
Vidéo : Un overview of the BWT ES800 Robotic Pool Cleaner's features, including its compact design, PVC brush, powerful suction, high-performance filter, and smart cable control with multiple cleaning modes and cycles.
Entretien
1. Nettoyage du panier filtrant
After each cleaning cycle, it is essential to clean the filter basket to maintain optimal performance. The ES800 features an easy-to-access filter basket.
- Retirez le nettoyeur de la piscine à l'aide de la poignée.
- Ouvrez le couvercle supérieur de l'appareil de nettoyage.
- Retirez le panier-filtre.
- Rincez soigneusement le panier-filtre avec un tuyau d'arrosage pour éliminer tous les débris.
- Réinsérez le panier-filtre propre et refermez bien le couvercle.
Image: A hand lifting the filter basket from the BWT ES800, illustrating the "Lift & Rinse" ease of use.
2. Entretien des brosses
Periodically inspect the PVC brushes for wear or damage. If the brushes are worn, they may need replacement to ensure effective cleaning. Contact customer support for replacement parts.
Image : Une image détaillée view of the BWT ES800's PVC brush, designed for effective scrubbing.
3. Gestion des câbles
After each use, coil the floating cable neatly to prevent kinks and tangles, which can affect the cleaner's movement and longevity.
4. Stockage
When not in use, store the BWT ES800 in a cool, dry, and shaded area, away from direct sunlight and extreme temperatures. Ensure the cleaner and its power supply are completely dry before storage.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'appareil de nettoyage ne démarre pas. | No power, loose connection, power supply fault. | Check power outlet, ensure all cables are securely connected. Verify power supply unit is functioning. |
| Cleaner moves slowly or erratically. | Clogged filter, tangled cable, debris in brushes/tracks. | Clean filter basket. Untangle cable. Remove debris from brushes and tracks. |
| Cleaner does not clean walls effectively. | Worn brushes, air trapped in unit, incorrect cleaning mode. | Inspect and replace brushes if worn. Ensure all air is expelled from the unit. Select "Wall & Waterline" or "Overall" cleaning mode. |
| Problèmes de connexion à l'application. | Bluetooth range, app not updated, pairing issue. | Ensure device is within Bluetooth range. Update the BWT Best Water App. Re-pair the device with the cleaner. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Modèle | ES800 |
| Dimensions du produit (L x l x H) | 15" x 14.6" x 9" (38.1 cm x 37.1 cm x 22.9 cm) |
| Poids | Moins de 13 lbs (5.9 kg) |
| Longueur du câble | 59 pieds (18 m) |
| Cycles de nettoyage | 1.5 heures, 2 heures, 2.5 heures |
| Puissance d'aspiration | 4,000 GPH (15 m³/h) |
| Finesse du filtre | 100 µm |
| Type de piscine | In-ground pools up to 49 ft (15 m) in length |
| Zones de nettoyage | Sol, murs, ligne de flottaison |
| Contrôle | On-unit button, BWT Best Water App (Bluetooth) |
| Système de navigation | Smart Navigation with integrated gyroscope, Gen Core 7 |
| Type de brosse | PVC |
| Source d'énergie | AC |
| Code UPC | 810045773032 |
Image: The BWT ES800 Robotic Pool Cleaner highlighting its key features and specifications.
Image: Internal components of the BWT ES800, showing the propeller motor, left motor, and right motor, emphasizing their efficiency and durability.
Garantie
The BWT ES800 Robotic Pool Cleaner is backed by a Garantie de 3 ans. This warranty covers manufacturing defects and ensures high-quality build and long-lasting performance. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official BWT website ou contacter le support client.
Assistance clientèle
For further assistance, technical support, or to inquire about replacement parts, please contact BWT customer service. You can find contact information on the official BWT website or through the BWT Best Water App.
Ressources en ligne : Visitez le BWT Store on Amazon pour obtenir des informations et une assistance sur les produits.