ECOSELF B0G4DDTP5B

ECOSELF Cold Press Juicer Machine Instruction Manual

Model: B0G4DDTP5B | Brand: ECOSELF

1. Mesures de sécurité importantes

Please read all instructions carefully before using your ECOSELF Cold Press Juicer Machine. Keep this manual for future reference.

  • Ensure the appliance is properly assembled before operation. The safety lock mechanism prevents operation if not correctly assembled.
  • Ne pas immerger le socle du moteur dans l'eau ou tout autre liquide. Nettoyer uniquement avec un produit nettoyant adapté.amp tissu.
  • Pendant le fonctionnement, veillez à ne pas introduire vos mains ni d'ustensiles dans la goulotte d'alimentation afin d'éviter toute blessure. Utilisez toujours le poussoir à aliments fourni.
  • Débranchez l'extracteur de jus de la prise de courant lorsqu'il n'est pas utilisé, avant d'assembler ou de démonter des pièces et avant de le nettoyer.
  • Do not use the appliance if the power cord or plug is damaged, or if the appliance malfunctions or is dropped.
  • Cet appareil est destiné à un usage domestique uniquement. Ne l'utilisez pas à l'extérieur.
  • Do not process frozen fruits, ice cubes, or hard seeds/pits as this may damage the auger and motor.

2. Produit terminéview

Familiarize yourself with the components of your ECOSELF Cold Press Juicer Machine for optimal use and maintenance.

Explosé view of ECOSELF Cold Press Juicer components

Figure 2.1 : Vue éclatée view showing all detachable parts of the juicer.

Assembled ECOSELF Cold Press Juicer Machine

Figure 2.2: Fully assembled ECOSELF Cold Press Juicer Machine.

Composants:

  • Base du moteur: L'unité principale contenant le moteur et le bouton de commande.
  • Juicing Chamber: The transparent upper section where fruits and vegetables are processed.
  • Tarière : The spiral-shaped component that crushes and presses produce.
  • Panier filtre : Sépare le jus de la pulpe.
  • Hopper Lid with Feed Chute: The top cover with a wide opening for feeding ingredients.
  • Poussoir à nourriture : Used to guide ingredients into the auger.
  • Sortie de jus avec bouchon anti-goutte : Distribue le jus extrait.
  • Point de vente de pâte à papier : Décharge de la pulpe sèche.
  • Tasse à jus : Recueille le jus extrait.
  • Coupe pulpaire : Récupère la pulpe rejetée.
  • Brosse de nettoyage: Pour faciliter le nettoyage du filtre et des autres pièces.

3. Installation

Suivez ces étapes pour assembler correctement votre extracteur de jus avant la première utilisation.

Visual guide for assembling the ECOSELF juicer in five steps

Figure 3.1: Step-by-step assembly of the juicer components onto the motor base.

  1. Placez le socle du moteur sur une surface stable et plane.
  2. Insert the filter basket into the juicing chamber.
  3. Place the auger into the center of the filter basket.
  4. Align the juicing chamber assembly with the motor base and rotate clockwise until it locks securely into place.
  5. Attach the hopper lid to the juicing chamber, ensuring it clicks into place. The juicer will not operate if the lid is not securely closed.
  6. Placez le gobelet à jus sous la sortie de jus et le gobelet à pulpe sous la sortie de pulpe.
Warning about aligning hopper lid with lock symbol before powering up

Figure 3.2: Important safety reminder for proper lid alignment.

Tip: Hopper can only be rotated when the cover is open

Figure 3.3: Operational tip regarding hopper rotation.

Automatic safety sensor ensures machine stops if cover is opened during operation

Figure 3.4: The juicer features an automatic safety sensor for user protection.

4. Mode d'emploi

Préparez vos ingrédients et commencez à extraire le jus en toute simplicité.

4.1 Préparation des ingrédients

  • Lavez soigneusement tous les fruits et légumes.
  • For most fruits and vegetables, pre-cutting is not necessary due to the wide feed chute. Simply drop whole items into the chute.
  • Remove hard pits from fruits like peaches, plums, or cherries.
  • For fibrous vegetables like celery, it is recommended to cut them into 1-2 inch pieces to prevent clogging.
Wide mouth feed chute accommodating whole fruits like oranges, celery, and apples

Figure 4.1: The wide feed chute allows for whole fruits and vegetables, minimizing prep time.

4.2 Procédé d'extraction du jus

  1. Ensure the juicer is properly assembled and the juice and pulp cups are in place.
  2. Branchez le cordon d’alimentation sur une prise électrique reliée à la terre.
  3. Turn the control knob to the 'ON' position. The motor will start operating quietly.
Close-up of the juicer's control knob with ON, OFF, and REV settings

Figure 4.2: The simple one-touch control knob for easy operation.

  1. Slowly feed ingredients into the wide feed chute. Use the food pusher to gently guide them down. Do not force ingredients.
  2. Observe the juice flowing into the juice cup and pulp being expelled into the pulp cup.
  3. Once all ingredients are processed, turn the control knob to the 'OFF' position.

4.3 Fonction inverse

If ingredients become jammed or the juicer stops during operation, use the reverse function to clear the blockage.

  • Turn the control knob to the 'REV' (Reverse) position and hold for a few seconds. This will rotate the auger in the opposite direction to dislodge any stuck ingredients.
  • Release the knob to return to the 'OFF' position, then switch back to 'ON' to resume juicing. Repeat if necessary.
Diagram showing clockwise rotation for ON and counter-clockwise rotation for REV to prevent clogging

Figure 4.3: Utilizing the reverse function to clear blockages and ensure continuous juicing.

4.4 High Juice Yield & Low Noise

The ECOSELF juicer is designed for maximum juice extraction and quiet operation.

Graphic illustrating 99% juice yield and reduced oxidation

Figure 4.4: The juicer extracts up to 99% of juice, minimizing waste and preserving nutrients.

Diagram showing the juicer's 45 rpm cold press, 60 dB lower noise, and 200W high power motor

Figure 4.5: The powerful yet quiet motor ensures efficient and pleasant juicing.

4.5 Vidéos pédagogiques

Video 4.1: Demonstrates the wide mouth feed chute and hands-free juicing capabilities.

Video 4.2: Guide on easy installation and assembly of the ECOSELF Cold Press Juicer.

Video 4.3: Detailed instructions on how to set up and use the juicer effectively.

5. Nettoyage et entretien

Un nettoyage régulier garantit la longévité et le fonctionnement hygiénique de votre extracteur de jus.

5.1 Démontage pour le nettoyage

Visual guide for disassembling the juicer for cleaning

Figure 5.1: Steps to disassemble the juicer for thorough cleaning.

  1. Éteignez l'extracteur de jus et débranchez-le de la prise électrique.
  2. Ouvrez le couvercle de la trémie.
  3. Rotate the juicing chamber counter-clockwise to unlock it from the motor base, then lift it off.
  4. Remove the auger, filter basket, and juicing chamber from the motor base.

5.2 Consignes de nettoyage

Woman rinsing juicer parts under running water

Figure 5.2: Rinsing juicer components under running water for quick cleaning.

  • Rinse all detachable parts (juicing chamber, auger, filter basket, hopper lid, juice cup, pulp cup) under running water immediately after use.
  • Use the provided cleaning brush to remove any stubborn pulp residue from the filter basket and other crevices.
  • Essuyez la base du moteur avec de l'annonceamp tissu. Ne jamais immerger le socle du moteur dans l'eau.
  • All detachable parts are dishwasher-safe for convenience.
  • Laisser sécher complètement toutes les pièces à l'air libre avant de les réassembler ou de les ranger.
Image showing dry pulp expelled from the juicer, indicating efficient extraction

Figure 5.3: The juicer produces drier pulp, making cleanup easier and reducing waste.

6. Dépannage

If you encounter any issues with your juicer, refer to the following common problems and solutions.

ProblèmeCause possibleSolution
L'extracteur de jus ne s'allume pas.Not properly assembled; power cord not plugged in; safety lock not engaged.Ensure all parts are correctly assembled and locked. Check power cord connection.
Ingredients are stuck/clogged.Overfeeding; hard ingredients; fibrous ingredients not cut.Use the 'REV' function to clear. If persistent, disassemble and clean. Cut fibrous ingredients into smaller pieces.
Faible rendement en jus / Pulpe humide.Ingredients processed too quickly; certain types of produce.Feed ingredients slowly. Some soft fruits naturally produce wetter pulp.
Vibrations ou bruits excessifs.Assemblage incorrect ; ingrédients difficiles à travailler.Check assembly. Ensure no hard objects like pits are being processed.

7. Spécifications

  • Marque: ECOSELF
  • Modèle: B0G4DDTP5B
  • Couleur: Noir Premium
  • Dimensions du produit : 7.68"P x 13.66"L x 14.96"H
  • Utilisations recommandées : Fruits, Vegetables, Leafy Greens
  • Capacité: 1.2 litres
  • Matériau de la lame : PMMA
  • Voltage: 120 volts
  • Poids de l'article : 7.81 livres
  • Caractéristiques spéciales : Easy to Clean & Assemble, High Juice Yield, High Power & Low Noise Motor, Large Feed Chute, Reverse Function & Safety Design, Self Feeding & Hands-Free Design.

8. Garantie et assistance

ECOSELF is committed to providing excellent customer service and support.

  • Garantie: We provide 24 months (after activation) of Repair and Replacement Service.
  • Assistance clientèle : For any inquiries or assistance, please contact us. We aim to reply within 24 hours.
  • Please refer to your purchase documentation for specific contact details or visit the official ECOSELF website.

© 2026 ECOSELF. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.