Introduction
The Jackery Explorer 240D is a compact and powerful portable power station designed to provide reliable energy for your devices during outdoor activities, travel, and emergencies. Featuring an 80,000mAh (256Wh) LiFePO4 battery, it offers a 200W pure DC output across 4 versatile ports (3 USB-C and 1 USB-A). Its lightweight and portable design, combined with multiple charging options, makes it an essential companion for staying connected wherever you go.
Image: Jackery Explorer 240D Portable Power Station, showcasing son design compact et ses multiples ports.
Installation
Déballage et charge initiale
- Remove the Jackery Explorer 240D from its packaging.
- Locate the included USB-C to USB-C cable.
- For optimal performance, fully charge the power station before first use. Connect the USB-C cable to a compatible power adapter (not included) and plug it into one of the USB-C input/output ports on the Explorer 240D. The display will indicate charging status.
Connexion des appareils
The Explorer 240D features various output ports to connect your devices:
- Ports USB-C (3x) : For high-speed charging of compatible devices. One port supports up to 140W, another up to 100W, and the third up to 15W.
- Port USB-A (1x) : For standard USB device charging (up to 15W).
Simply plug your device's charging cable into the appropriate port on the power station.
Image : Gros plan view of the Jackery Explorer 240D's front panel, highlighting the USB-C and USB-A output ports.
Mode d'emploi
Mise sous/hors tension
Press the 'Power' button located on the front panel to turn the unit on or off. The display will illuminate, showing battery level, input wattage, et wat de sortietage.
Utilisation des ports de sortie
Once powered on, simply plug your devices into the desired USB-C or USB-A ports. The power station will automatically begin charging. The display will show the total output wattage.
Charger la centrale électrique
The Jackery Explorer 240D offers flexible charging options:
- Chargement USB-C: Use the included USB-C cable with a compatible power adapter.
- Charge solaire: Connect a compatible solar panel (up to 100W) to the designated input port.
- Recharge de voiture : Use a car charger adapter (not included) to charge from your vehicle's 12V outlet.
- AC-DC Dual Input: Achieve 0% to 80% charge in approximately one hour using both AC and DC inputs simultaneously.
Image: Illustration of the Jackery Explorer 240D being charged via AC, solar panel, and car adapter.
Smart Energy-Saving Mode
The unit features a smart energy-saving mode to efficiently extend power supply duration. This mode is activated by default. To activate the maximum 200W output, press the power button three times.
Vidéo : Plusview of Jackery 240D with a Solar Panel
Vidéo : Un aperçu détailléview of the Jackery Explorer 240D, demonstrating its features and how to connect it with a solar panel for charging.
Entretien
Entretien de la batterie
The Explorer 240D features an upgraded LiFePO4 lithium battery designed for a 10-year lifespan, maintaining at least 70% of its original energy capacity after 6,000 charge cycles. To prolong battery life, avoid extreme temperatures and store the unit in a cool, dry place when not in use.
Image: Visual representation of the Jackery Explorer 240D's long-lasting LiFePO4 battery with 10+ years lifespan and 6000 charge cycles.
Environnement d'exploitation
The power station is designed to operate seamlessly in temperatures ranging from -4°F to 113°F (-20°C to 45°C). Ensure proper ventilation during use to prevent overheating.
Dépannage
L'unité ne s'allume pas
- Ensure the battery has sufficient charge. Recharge if necessary.
- Press and hold the 'Power' button for a few seconds to ensure it's properly activated.
Les appareils ne chargent pas
- Verify that the power station is turned on and has adequate battery life.
- Check if the device's charging cable is securely connected to both the power station and the device.
- Ensure the device's power requirements do not exceed the port's maximum output (e.g., 140W for C1, 100W for C2, 15W for C3/A).
- If using the energy-saving mode, ensure the output is sufficient for your device. Triple-press the power button to activate maximum 200W output if needed.
Chargement lent
- Check the input wattage displayed on the screen. Ensure your charging source (wall adapter, solar panel, car charger) is providing sufficient power.
- For solar charging, ensure the solar panel is positioned to receive maximum sunlight.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | Jackie |
| Nom du modèle | JE-240B |
| Type de batterie | Lithium LiFePO4 |
| Capacité | 256 Wh (80,000 mAh) |
| Puissance de sortietage | 200W (DC Output) |
| Sortie USB-C | C1: 140W, C2: 100W, C3: 15W |
| Sortie USB-A | 15 W |
| Vol d'entréetage | 11-28V (DC Input) |
| Max Solar Charging | 100 W |
| Température de fonctionnement | -4°F à 113°F (-20°C à 45°C) |
| Durée de vie | 10 years (≥70% capacity after 6,000 cycles) |
| Poids | 4.85 livres |
| Dimensions | Compact design, 70% smaller and 46% lighter than comparable AC portable power stations. |
Garantie
The Jackery Explorer 240D comes with a 5-year warranty. For detailed terms and conditions, please refer to the official Jackery website ou la carte de garantie incluse dans l'emballage de votre produit.
Soutien
For further assistance, product registration, or to access additional resources, please visit the official Jackery website. You can also refer to the 'E240D User Manual' included in the box for comprehensive information.
Inclus dans la boîte :
- 1x Jackery Explorer 240D Portable Power Station
- 1x USB-C to USB-C Cable (doubles as a carrying strap)
- 1x E240D User Manual