LASFIT 7440 7443 Red LED Bulb Instruction Manual

1. Introduction

Thank you for choosing LASFIT 7440 7443 Red LED Bulbs. These bulbs are designed to provide enhanced brightness and reliability for your vehicle's tail and brake lights. Featuring an upgraded built-in resistor, they are engineered to be CANBUS error-free, preventing common issues like hyper flash. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance.

2. caractéristiques du produit

• CANBUS Error-Free Design: Integrated resistor eliminates hyper flash and error warnings in most vehicles.
• Luminosité améliorée : Up to 500% brighter than standard halogen bulbs, providing 4800LM per brake light for improved visibility.
• Puces LED avancées : Equipped with 15pcs 1860 and 3570 top-grade LED chips for 360-degree full lighting effect.
• Remplacement direct : Designed for a perfect fit, replacing OEM 7444na, 7441, 7444, 7440NA, W21W, WY21W bulbs.
• Longue durée de vie : Constructed with a full aviation aluminum body and a 12,000RPM turbo cooling fan, ensuring a lifespan of over 30,000 hours.
• Installation Plug-and-Play : Non-polarity design allows for quick and easy installation without modifications.

Image: LASFIT LED Bulb with integrated CANBUS chip, illustrating error-free operation on a vehicle dashboard.

Image: Visual comparison demonstrating the significantly brighter output of the LASFIT LED bulb compared to a traditional halogen bulb.

3. Instructions d'installation

The LASFIT 7440 7443 LED bulbs are designed for a straightforward plug-and-play installation. No modifications are typically required. Please follow these steps:

1. Locate the Bulb: Identify the tail or brake light housing on your vehicle. Consult your vehicle's owner's manual for specific access instructions.
2. Remove Halogen Bulb: Carefully twist and pull out the existing halogen bulb from its socket.
3. Insérer une ampoule LED : Insert the new LASFIT LED bulb into the socket. The non-polarity design means it can be inserted in either direction.
4. Fonctionnalité de test : Before fully reassembling, test the light function (tail light and brake light) to ensure proper operation.
5. Fixer l'ampoule : Once confirmed working, twist the bulb and socket back into the light housing until secure.

Remarque importante : If the LED does not light up after inserting, simply remove it, flip the direction, and reinstall. This addresses the polarity sensitivity mentioned in some cases.

Image: Step-by-step visual guide for replacing a halogen bulb with a LASFIT LED bulb.

Image: Methods for verifying correct bulb size and compatibility for your vehicle.

4. Mode d'emploi

Once installed, the LASFIT 7440 7443 Red LED Bulbs operate automatically with your vehicle's existing lighting system. They will function as your tail lights (dimmer illumination) and brake lights (brighter illumination) when activated by your vehicle's controls.

• Tail Light Function: Activates when your vehicle's headlights or parking lights are turned on.
• Fonction feu stop : Activates when the brake pedal is pressed, providing a significantly brighter red light for increased safety.

Image: Demonstration of LASFIT LED bulbs functioning as both tail and brake lights on a vehicle.

5. Entretien

LASFIT LED bulbs are designed for long-term, maintenance-free operation. Due to their durable construction and efficient cooling system, regular maintenance is not typically required. Keep the light housing clean to ensure maximum light output.

Image : Intérieure view of the LASFIT LED bulb highlighting its advanced cooling system for extended lifespan.

Image: Lifespan comparison between LASFIT LED bulbs and standard halogen bulbs.

6. Dépannage

If you encounter any issues with your LASFIT LED bulbs, please refer to the following common solutions:

• L'ampoule ne s'allume pas :
  • Assurez-vous que l’ampoule est bien insérée dans la douille.
  • Due to polarity sensitivity, if the LED does not light up, remove it, rotate it 180 degrees, and reinsert.
  • Check the vehicle's fuse box for any blown fuses related to the lighting circuit.
• Hyper Flash or Error Warning on Dashboard:
  • While LASFIT bulbs are designed to be CANBUS error-free, some highly sensitive vehicle systems may still trigger a warning. Ensure the bulb is correctly installed.
  • If hyper flash persists, verify that the bulb type is correct for your vehicle's specific application (e.g., 7443 for brake/tail, not 7440 for turn signal if it requires a different resistance).
• Éclairage faible ou irrégulier :
  • Ensure the bulb is clean and free from debris.
  • Verify the bulb is fully seated and making proper electrical contact.

If these steps do not resolve the issue, please contact LASFIT Customer Support.

7. Spécifications

8. Garantie et support client

LASFIT provides a Garantie de remplacement d'un an for these LED bulbs. If you experience any issues or have questions regarding your product, please do not hesitate to contact our customer support team.

Our customer support is available 7 jours sur 24, XNUMX heures sur XNUMX pour vous aider.

For support, please visit the official LASFIT webConsultez notre site ou contactez-nous via votre plateforme d'achat.

9. Vidéo produit