SNIXWOO Snxpl2026

SNIXWOO Side Steps Running Boards for Hyundai Palisade 2026 Instruction Manual

Model: Snxpl2026

1. Introduction

This instruction manual provides detailed guidance for the proper installation, safe operation, and routine maintenance of your SNIXWOO Side Steps Running Boards. These running boards are specifically designed for the Hyundai Palisade 2026 model, offering a stable and convenient stepping platform for vehicle entry and exit, while also providing side protection.

Please read this manual thoroughly before installation and use to ensure correct procedures and to prevent damage to the product or your vehicle.

Family using side steps to enter a Hyundai Palisade in a snowy environment.

Image 1.1: Side steps provide easier access to the vehicle.

2. Compatibilité

These SNIXWOO Side Steps Running Boards are custom designed for a vehicle-specific fit.

  • Compatible avec : Hyundai Palisade 2026 model.
  • Non compatible avec : Hyundai Palisade 2020-2025 models.
Compatibility graphic showing a 2026+ Hyundai Palisade as compatible and a 2020-2025 model as not compatible.

Image 2.1: Visual representation of vehicle compatibility.

3. Contenu du colis

Verify that all components listed below are present and undamaged before beginning installation. If any parts are missing or damaged, contact SNIXWOO customer support.

  • Driver Side Running Board (1)
  • Passenger Side Running Board (1)
  • Mounting Brackets (Specific to vehicle model)
  • All Necessary Mounting Hardware (Bolts, washers, nuts, etc.)
  • Detailed Installation Instructions (This manual)

4. Configuration et installation

Installation of these running boards does not require drilling, preserving your vehicle's original structure. It is recommended to have a second person assist with the installation due to the size and weight of the running boards. Typical installation time is less than 4 hours for both sides.

4.1 Outils nécessaires (non inclus)

  • Jeu de douilles Clé
  • Clé dynamométrique
  • Mètre à ruban
  • Lunettes de sécurité
  • Gants

4.2 Étapes de pré-installation

  1. Garez le véhicule sur une surface plane et serrez le frein de stationnement.
  2. Ensure the vehicle is cool to the touch before starting.
  3. Clean the installation areas on the vehicle's undercarriage where the brackets will attach.
  4. Identify the driver and passenger side running boards.

4.3 Procédure d'installation

  1. Locate the factory mounting points on the vehicle's frame or rocker panel. These are typically pre-drilled holes or existing bolts.
  2. Attach the mounting brackets to the vehicle's frame using the provided hardware. Hand-tighten all bolts initially.
  3. Carefully lift the running board into position and align it with the attached mounting brackets.
  4. Secure the running board to the brackets using the remaining hardware. Hand-tighten all bolts.
  5. Adjust the running board for optimal alignment and desired protrusion from the vehicle. Ensure it is level and evenly spaced.
  6. Once satisfied with the alignment, fully tighten all bolts to the manufacturer's specified torque settings (refer to your vehicle's service manual for general torque specifications for frame bolts, or consult a professional).
  7. Repeat the process for the opposite side of the vehicle.
  8. Remarque importante : Some users have reported needing to remove a small, temporary plastic clip or section on the front end of the vehicle's undercarriage for optimal front step alignment. This is a minor adjustment and does not affect the vehicle's integrity.
Diagram showing the dimensions of the running board, approximately 79.3 inches long and 4.7 inches wide.

Image 4.1: Product dimensions for reference during installation.

5. Mode d'emploi

The SNIXWOO Side Steps Running Boards are designed to provide a stable and secure platform for stepping into and out of your Hyundai Palisade 2026. They also offer a degree of protection to the lower sides of your vehicle from road debris.

  • Pas à pas : Use the running boards as a stable step when entering or exiting the vehicle. Ensure your footing is secure before applying full weight.
  • Capacité de poids : The running boards are designed to support up to 500 lbs (226 kg) per side. Do not exceed this weight limit.
  • Protection: The running boards act as a barrier against minor impacts from road debris, mud, and gravel, helping to protect your vehicle's paint and bodywork.

6. Entretien

Regular maintenance will ensure the longevity and optimal performance of your running boards.

  • Nettoyage: Clean the running boards regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Rinse thoroughly and dry to prevent water spots.
  • Inspection: Periodically inspect all mounting hardware (bolts, nuts, brackets) for tightness. Re-tighten any loose fasteners to prevent rattling or instability.
  • Vérification des dommages : Check for any signs of damage, such as cracks, bends, or excessive wear. Address any damage promptly to maintain safety and structural integrity.

7. Dépannage

If you encounter any issues with your running boards, refer to the following common problems and solutions.

ProblèmeCause possibleSolution
Running board feels loose or rattlesMatériel de montage lâcheInspect and re-tighten all bolts and nuts securing the running board to the brackets and the brackets to the vehicle frame.
Difficulty aligning the running boardBrackets not positioned correctly; temporary vehicle clips obstructing fitLoosen bracket bolts, adjust bracket position, and re-tighten. Ensure any temporary vehicle clips are removed if they interfere with the fit.
Unusual noise from running boardLoose components; debris trappedCheck all fasteners for tightness. Inspect for any trapped debris between the running board and the vehicle body and remove it.

If the problem persists after attempting these solutions, please contact SNIXWOO customer support for further assistance.

8. Spécifications

MarqueSNIXWOO
Numéro de modèleSnxpl2026
Numéro de pièce du fabricantSp-pal-2026
MatérielAcier allié d'aluminium
Finition extérieureAluminium
CouleurNoir et argent
Dimensions du produit (L x l x H)203.2 x 15.24 x 10.16 cm (79.3 x 6 x 4 pouces)
Poids de l'article20.4 kg (45 lb)
Capacité de poids500 livres (226 kg)
Type de service de véhiculeCompatible with Hyundai Palisade 2026, Passenger Car, Truck
Type d'ajustement automobileAjustement spécifique au véhicule

9. Garantie et assistance

For warranty information or technical support, please contact SNIXWOO directly through their official webConsultez le site web ou le détaillant où le produit a été acheté. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.

SNIXWOO is committed to providing quality products and customer satisfaction. Do not attempt to modify the product, as this may void the warranty and compromise safety.

© 2026 SNIXWOO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.