Veken Stainless Steel Pet Water Fountain

Introduction

Thank you for choosing the Veken Stainless Steel Pet Water Fountain. This automatic pet fountain is designed to provide your beloved pets with a continuous supply of fresh, filtered water, promoting better hydration and overall health. Crafted from high-quality 304 stainless steel, it offers durability, easy maintenance, and quiet operation. This manual provides essential information for setup, operation, and care to ensure optimal performance and longevity of your pet fountain.

Image: The Veken Stainless Steel Pet Water Fountain in operation, showcasing son design élégant et son débit d'eau continu.

Consignes de sécurité

• For indoor use only. Do not expose the fountain to outdoor elements.
• Use only the original Veken adapter with a wall outlet in good condition.
• Do not clean the filter; replace it regularly as instructed in the maintenance section.
• Ensure the power cord is not damaged or frayed. Discontinue use if any damage is observed.
• Keep the fountain on a stable, level surface to prevent tipping and spills.
• Débranchez toujours la fontaine avant de la nettoyer ou d'effectuer toute opération d'entretien.

Contenu du colis

Veuillez vérifier que tous les articles sont présents dans votre colis :

• 1x Stainless Steel Pet Water Fountain (108oz/3.2L capacity)
• 1x DC Pump with 6ft power cord
• 1x AC Adapter (AC 100-120V)
• 6x Replacement Filters
• 6x Pre-filter Sponges
• 1x Flower Spout
• 1x Silicone Mat (11.8in x 11.8in)
• 1x Brosse de nettoyage
• 1x Manuel d'instructions

Image: All components included in the Veken Stainless Steel Pet Water Fountain package.

Guide d'installation

Follow these steps to assemble your Veken Pet Water Fountain:

1. Composants de rinçage : Thoroughly rinse all parts of the fountain (stainless steel basin, lid, pump, filters, spout) with water before first use.
2. Installer la pompe : Place the ultra-quiet DC pump into the designated slot at the bottom of the stainless steel basin. Ensure the power cord is routed through the groove to prevent pinching.
3. Insert Pre-filter Sponge: Attach a pre-filter sponge to the pump intake to catch larger debris.
4. Filtre de placement : Soak a new filter in water for 5 minutes. Then, place the multi-stage filter into the filter tray on the underside of the lid.
5. Remplir d'eau : Remplissez le récipient en acier inoxydable basin with water up to the 'MAX' fill line. It is recommended to use softened or filtered water for best results.
6. Fixez le couvercle et le bec verseur : Place the lid onto the basin, ensuring it is securely seated. Insert the flower spout into the pump's outlet on the lid. You can choose between the flower waterfall mode or remove the spout for a gentle bubbling surface.
7. Connecter l'alimentation : Plug the AC adapter into a wall outlet. The fountain will begin operating.

Image: The assembled Veken Pet Water Fountain, highlighting its quiet design and LED indicator.

Mode d'emploi

Modes d'écoulement de l'eau

The fountain offers two distinct water flow modes to cater to your pet's preferences:

• Cascade de fleurs : Use the included flower spout for a gentle, flowing stream that encourages pets to drink. This mode is often preferred by picky pets.
• Gentle Bubbling Surface: Remove the flower spout for a calm, bubbling water surface. This mode is suitable for pets who prefer a quieter drinking experience or need more space.

Image: Visual representation of the two available water flow modes.

Surveillance du niveau d'eau

The fountain features a large viewing window, enhanced by an optional blue LED light, allowing you to easily monitor the water level without disassembling the unit. Ensure the water level remains above the minimum fill line to prevent pump damage and maintain quiet operation.

Image: The large capacity fountain with a visible water level window, suitable for multiple pets.

Entretien

Nettoyage de la fontaine

The Veken Pet Water Fountain is designed for easy cleaning. All water-contact parts are made from 304 stainless steel and are top-rack dishwasher safe. For manual cleaning:

• Débranchez la fontaine de la prise électrique.
• Disassemble the fountain by removing the lid, spout, and pump.
• Lavez l'acier inoxydable basin and lid with mild soap and water. Rinse thoroughly.
• Use the provided cleaning brush to clean the pump and spout.
• Rincez soigneusement tous les composants pour éliminer tout résidu de savon.
• Séchez complètement toutes les pièces avant le remontage.

Image : Les composants en acier inoxydable passent au lave-vaisselle pour un nettoyage facile.

Remplacement du filtre

The high-efficiency filter should be replaced regularly to ensure optimal water quality. Do not clean and reuse filters.

• Replace the filter every 2-4 weeks, depending on the number of pets and water quality.
• Soak new filters in water for 5 minutes before installation.

Image : Les 5-stage filtration system ensures clean and fresh drinking water.

Nettoyage de la pompe

The pump should be cleaned periodically to prevent mineral buildup and maintain quiet operation.

• Disassemble the pump and clean all parts with the provided brush.
• Rincer abondamment.

Dépannage

Caractéristiques

Garantie et assistance

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Veken webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat.