1. Introduction
The Jebao SCP-50 Sine Cross Flow Pump is designed to create natural wave-like currents in your reef tank, promoting a healthy environment for aquatic life. Its unique crossflow technology ensures a 360-degree return flow, effectively eliminating dead spots and distributing water evenly throughout the aquarium. This manual provides essential information for the safe and efficient operation of your wave maker.
The pump is capable of moving water at a rate of 396 to 1320 GPH (Gallons Per Hour).
2. Consignes de sécurité
WARNING: Please read all safety instructions before use to prevent injury or damage to the product.
- Ensure the pump is always submerged in water during operation. Running dry will cause damage.
- La température maximale de l'eau pour le fonctionnement est de 35°C (95°F).
- Débranchez toujours l'alimentation électrique avant d'effectuer toute opération de maintenance ou de manipulation de la pompe.
- N’essayez pas de démonter ou de réparer vous-même la pompe ou le contrôleur. Contactez un technicien qualifié pour toute intervention.
- Keep the magnetic mount away from children. Strong magnets can pinch fingers.
- Avoid placing the magnetic mount near sensitive electronic devices or magnetic media (e.g., credit cards) to prevent damage.
- Ensure the power cord is not damaged or pinched. Do not operate with a damaged cord.
3. Contenu du colis
Vérifiez que tous les composants sont présents dans le package :
- Jebao SCP-50 Cross Flow Pump
- Contrôleur
- AC Adapter (100V-240V, 50/60Hz input; DC 24V, 12W output)
Image: All components included in the Jebao SCP-50 package, including the pump, controller, and AC adapter.
4. Produit terminéview
Image : Côté view of the Jebao SCP-50 Sine Cross Flow Pump, showing its compact design.
Image : Haut view of the Jebao SCP-50 Sine Cross Flow Pump, highlighting the cross-flow outlet.
Image: The Jebao SCP-50 pump with its power cable and product label, showing specifications.
Image: Diagram illustrating the dimensions of the Jebao SCP-50 pump: approximately 4.8 inches long and 1.79 inches wide.
5. Installation
- Installation de la pompe : Position the pump inside your aquarium using the magnetic mount. Place the pump on the desired inner wall of the tank and align the external magnet on the outer wall directly opposite the pump. Ensure the pump is fully submerged and securely attached.
- Connexion du contrôleur : Raccordez le câble de la pompe au port prévu à cet effet sur le contrôleur.
- Connexion de l'alimentation : Plug the AC adapter into the controller, then plug the AC adapter into a standard electrical outlet.
- Mise sous tension initiale : The pump will start operating according to the default settings.
6. Operating Modes and Controller Functions
The controller allows you to select various operating modes and adjust settings. The controller features buttons for Vitesse, Lumière, Verrouillage, Pouvoir, et Pompe.
Modes de fonctionnement :
- H — Constant Flow Mode: Provides a steady, continuous flow at the speed you set. This mode is ideal for consistent water circulation.
- W1 — Wave Box (Pulse) Mode: Generates a pulsed output to create a standing wave effect. This mode is suitable for simulating natural ocean currents.
- W2 — Clockwise Circulation Mode: Operates with a normal flow that circulates clockwise. You can set a timer for this mode (4–99 minutes).
- W3 — Reef Mode: Offers a variable, randomized flow pattern designed to mimic natural reef currents, providing dynamic water movement.
Fonctions spéciales :
- Mode d'alimentation: Activates a 10-minute pause in pump operation to allow for feeding without food being immediately swept away. This protects your livestock and ensures proper feeding.
- Direction: By default, circulation is clockwise unless a specific mode dictates otherwise.
7. Entretien
Regular maintenance ensures optimal performance and longevity of your Jebao SCP-50 pump.
- Nettoyage de la turbine : Periodically remove the pump from the tank and carefully disassemble the front cover to access the impeller. Clean any algae, debris, or calcium buildup from the impeller and its housing using a soft brush and freshwater.
- Nettoyage des logements : Clean the pump's exterior and intake/output grates to ensure unrestricted water flow.
- Inspection des câbles : Inspectez régulièrement le câble d'alimentation et les connexions afin de détecter tout signe d'usure ou de dommage.
- Always ensure the pump is disconnected from power before performing any cleaning or maintenance.
8. Dépannage
If you encounter issues with your Jebao SCP-50 pump, refer to the following common troubleshooting steps:
- La pompe ne démarre pas :
- Vérifiez que l'adaptateur secteur est bien branché à la fois sur la manette et sur la prise électrique.
- Assurez-vous que le contrôleur est sous tension.
- Verify that the pump cable is firmly connected to the controller.
- Weak or No Flow:
- Disconnect power and inspect the pump's impeller for any obstructions (e.g., debris, algae, snails). Clean thoroughly.
- Check the pump's intake and output grates for blockages.
- Assurez-vous que la pompe est complètement immergée dans l’eau.
- Bruit inhabituel :
- Disconnect power and check the impeller for foreign objects or damage.
- Assurez-vous que la pompe est bien fixée et qu'elle ne vibre pas contre la vitre du réservoir.
- Verify that the pump is fully submerged and not drawing air.
If problems persist after following these steps, please contact Jebao customer support.
9. Spécifications
- Modèle: SCP-50
- Marque: Jebao
- Débit: 396 - 1320 GPH (Gallons Per Hour)
- Dimensions (Pompe) : Approximately 4.75" (L) x 1.75" (W) x 1.25" (H)
- Source d'alimentation : AC
- Voltage: 110-240V, 50/60Hz (via AC adapter)
- Sortir: 24 V CC, 12 W
- Composants inclus : Pump, Controller, AC Adapter
10. Garantie et assistance
For warranty information, product support, or service inquiries, please refer to the documentation provided with your purchase or contact Jebao customer service directly. Keep your purchase receipt as proof of purchase.