NEWPET NP892 Cat Water Fountain Pump Instruction Manual

Introduction

This manual provides essential instructions for the safe and efficient use, setup, operation, and maintenance of your NEWPET NP892 Cat Water Fountain Pump. Please read this manual thoroughly before using the product and retain it for future reference.

Instructions d'installation

The NEWPET NP892 pump is designed for universal compatibility with most automatic pet water fountains. Follow these steps for initial setup:

Déballer: Retirez délicatement la pompe de son emballage.
Inspecter: Check the pump for any visible damage. Do not use if damaged.
Placement: Position the pump securely at the bottom of your pet water fountain's reservoir. Ensure the suction cups on the pump base adhere firmly to the fountain surface.
Connecter la tubulure : Attach the fountain's water outlet tubing to the pump's nozzle.
Remplir la fontaine : Fill the pet water fountain with clean water to the recommended level, ensuring the pump is fully submerged.
Connexion électrique : Connect the USB power cable to a compatible DC 5V USB power adapter (not included).
Mise sous tension : Plug the power adapter into an electrical outlet. The pump should begin operating, and the LED indicator will light up blue.

NEWPET NP892 cat water fountain pump with USB cable and a stainless steel pet fountain. — This image displays the NEWPET NP892 water pump, featuring a white body with a black filter, connected to a black USB power cable. Next to it is a stainless steel pet water fountain, indicating the pump's intended use.

Mode d'emploi

The NEWPET NP892 pump is designed for continuous, quiet operation, providing fresh water for your pets.

Opération automatique: Once powered on and submerged, the pump will continuously circulate water.
Indicateur LED :
- Lumière bleue : Indique un fonctionnement normal.
- Feu rouge : Indicates a low water level. The pump will automatically shut off to prevent dry running and damage. Refill the fountain with water immediately.
Conception à faible bruit: The brushless motor operates at less than 40dB, ensuring a quiet environment that will not disturb your pet's sleep or your household.

Entretien et nettoyage

Regular cleaning is crucial for the longevity and optimal performance of your pump, as well as for your pet's health. It is recommended to clean the pump every 2 weeks.

Débrancher l'alimentation : Always unplug the fountain from the power outlet before performing any maintenance.
Démonter: Carefully remove the pump from the fountain. Disassemble the pump components, including the filter cover, impeller cover, and impeller.
Nettoyer les composants : Rinse all parts under running water. Use a small brush (not included) to remove any hair, debris, or mineral deposits from the impeller, impeller housing, and filter. Ensure the impeller spins freely.
Clean Fountain: Clean the entire water fountain according to its specific instructions.
Remonter: Reassemble the pump components in reverse order, ensuring all parts are securely in place.
Réinstallez: Place the cleaned pump back into the fountain, ensuring it is fully submerged before reconnecting power.

This video demonstrates the disassembly and cleaning process for the NEWPET NP892 water pump and its components, including the filter cover, impeller, and housing, ensuring proper maintenance for your pet's water fountain.

Dépannage

If you encounter issues with your NEWPET NP892 pump, refer to the following common problems and solutions:

Problème	Cause possible	Solution
Pump not working (no water flow, no light)	Pas d'alimentation électrique. Pump not properly connected. Low water level (Red LED).	Check if the power adapter is plugged in and the outlet is functional. Ensure the USB cable is securely connected to the pump and adapter. Refill the fountain with water until the pump is fully submerged and the LED turns blue.
Pump making unusual noise or weak flow	Debris or hair obstructing the impeller. Accumulation minérale. Pompe non entièrement immergée.	Disconnect power, disassemble, and thoroughly clean the pump, especially the impeller and its housing (refer to Maintenance section). Ensure the water level is adequate and the pump is completely submerged.
Red LED indicator is on	Le niveau d'eau est trop bas.	Immediately refill the water fountain to the appropriate level. The pump will resume normal operation (blue LED) once sufficient water is detected.

Caractéristiques

Fonctionnalité	Détail
Numéro de modèle	NEWPET NP892 (DR-DC160)
Matériel	Plastique
Vol de travailtage	5 V CC
Courant de charge	280 mA
Puissance de charge	1.5 W
Hauteur de levage maximale	50 cm
Débit max.	160 L/H
Diamètre de sortie	10.5 mm
Continuous Lifespan	> 10,000 heures
Niveau de bruit	≤ 40 dB
Indice d'étanchéité	IP68
Température de fonctionnement	0-60 ℃ / 0-100 ℃
Indicateur LED	Red (low water/shutdown warning), Blue (normal operation)
Longueur du câble	150 cm / 4.9 feet (with DC5.5 * 2.1 plug)
Taille du produit	4.3 * 4.3 * 2.8 cm / 1.6 * 1.6 * 1.1 inch
Poids du produit	120 g / 4.2 oz

Garantie et assistance

For warranty information or technical support, please refer to the documentation provided with your original purchase or contact NEWPET customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.

Vous pouvez également visiter le NEWPET store on Amazon pour plus d'informations et les options de contact.