Huepar SW-T100 3-in-1 Laser Measurement Tool User Manual

1. Introduction

The Huepar SW-T100 is a versatile 3-in-1 measurement tool designed for various applications in construction, home improvement, and DIY projects. It integrates a laser distance meter, a green cross line laser level, and a traditional tape measure into a single compact device. This manual provides detailed instructions for safe and effective operation of your device.

Image 1.1: The Huepar SW-T100 demonstrating its three core measurement functions.

2. Consignes de sécurité

This device uses a Class 2 laser (490-560nm, <1mW). Observe the following safety precautions:

• Ne regardez pas directement le faisceau laser.
• Avoid directing the laser beam at other people or reflective surfaces.
• Do not disassemble the device; laser radiation exposure may occur.
• Gardez l’appareil hors de portée des enfants.
• Use only the specified Type-C charging cable.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans votre colis :

• 1x Huepar SW-T100 3-in-1 Laser Measurement Tool
• 1x Câble de chargement Type-C
• 1x Portable Carry Bag
• 1 dragonne
• 1x Auxiliary Measuring Target Plate
• 1x Manuel d'utilisation (ce document)

Image 3.1: All components included in the Huepar SW-T100 product box.

4. Installation

4.1. Chargement de l'appareil

The device is equipped with a built-in 3.7V / 600mAh Lithium-Ion rechargeable battery. Before first use, fully charge the device.

1. Connectez le câble de charge de type C fourni au port de charge de l'appareil.
2. Connectez l'autre extrémité du câble à un adaptateur secteur USB standard (non fourni).
3. L'indicateur de charge à l'écran affichera l'état de la charge.
4. Une charge complète prend généralement quelques heures.

Image 4.1: The device being charged via its Type-C port.

4.2. Mise sous tension initiale

Appuyez sur le Power ON/Measure button to turn on the device. The display will illuminate, and the device will be ready for use.

5. Mode d'emploi

5.1. Commandes générales

L'appareil comporte plusieurs boutons pour différentes fonctions :

• Power ON/Measure Button: Turns the device on/off and initiates measurements.
• Laser Level Mode Button: Activates the green cross line laser.
• Unit Switch/Sound Button: Changes measurement units and controls voice broadcast.
• Benchmark/Mode Switch Button: Selects measurement reference points and different measurement modes.
• Addition/Subtraction Buttons: Ajoute ou soustrait des mesures.
• Data Saving Button: Enregistre les données de mesure actuelles.
• Turn off/Clear Button: Clears the last measurement or turns off the device with a long press.

5.2. Laser Distance Measurement Mode

This mode provides precise distance measurements up to 330ft/100M with an accuracy of ±1/16 inch.

1. Appuyez sur le Power ON/Measure bouton pour activer le laser.
2. Dirigez le laser vers le point cible.
3. Appuyez sur le Power ON/Measure Appuyez de nouveau sur le bouton pour effectuer la mesure. Le résultat s'affichera à l'écran.

Types de mesure :

L'appareil prend en charge diverses fonctions de mesure :

• Mesure de distance : Single point-to-point distance.
• Mesure de surface : Calcule l'aire d'une surface.
• Mesure des volumes : Calcule le volume d'un espace.
• Indirect Height (Pythagoras): Calculates height using two or three measurements.
• Zone murale : Calcule la surface totale de plusieurs murs.
• Mesure continue : Fournit des mises à jour de distance en temps réel lorsque vous déplacez l'appareil.

Image 5.1: Visual representation of the 9 available measurement modes.

Points de référence :

You can select the measurement reference point:

• Front-based: Measures from the front edge of the device.
• Rear-based: Measures from the rear edge of the device.
• Screw-hole based: Measures from the tripod screw hole.

Diffusion vocale :

The device features real-time voice feedback for measurements, enhancing readability and efficiency, especially in challenging conditions or for users with limited vision.

• Appuyez longuement sur le Unit Switch/Sound button to switch between Chinese voice, English voice, or to turn off the sound.
• Note: The device does not broadcast voice while charging.

Image 5.2: The voice broadcast feature in action, providing audible measurement readings.

Mémoire de données:

The device can store up to 100 readings, allowing you to recall past measurements without manual notes.

5.3. Green Cross Line Laser Level Mode

This mode projects bright green horizontal and vertical cross lines, ideal for tasks like picture hanging, shelf installation, and tile alignment. Accuracy is ±1/9 inch.

1. Appuyez sur le Laser Level Mode button to activate the green cross lines.
2. Place the device on a stable surface or mount it on a tripod using the 1/4"-20 threaded mount.
3. The screen displays angles from -90° to +90° horizontally.
4. If the angle is > ±4°, the 'Out' indicator will flash on the screen, and the laser line will flash rapidly, indicating the device is not level.

Image 5.3: Using the green cross line laser for leveling tasks.

5.4. Tape Measure Function

The integrated digital tape measure extends up to 6.5ft/2M for traditional short-distance measurements.

• Pull out the tape measure from the side of the device.
• The tape measure features both imperial and metric markings.

5.5. Commutation d'unité

Appuyez sur le Unit Switch/Sound button to cycle through available measurement units (m, cm, mm, ft, ft+inches, ft+fractions).

5.6. Arrêt automatique

To conserve battery life, the device will automatically shut off after 150 seconds of inactivity. This setting cannot be changed.

6. Maintenance et entretien

• Nettoyage: Essuyez l'appareil avec un chiffon doux, damp tissu. N'utilisez pas de produits chimiques agressifs ou de nettoyants abrasifs.
• Stockage: Store the device in its portable carry bag in a cool, dry place when not in use.
• Conception robuste : The device features a tough TPE housing, providing resistance against drops, dust, and light water spray (IP54 rated). While durable, avoid intentional exposure to harsh conditions.

Image 6.1: The device's robust construction and tripod mounting option.

7. Dépannage

• L'appareil ne s'allume pas : Ensure the battery is charged. Connect to the Type-C charger and try again.
• Mesures laser inexactes : Ensure the laser lens is clean. Verify the correct reference point is selected. Ensure the target surface is flat and reflective enough. Use the auxiliary target plate if needed.
• Laser line flashing in level mode: This indicates the device is outside its self-leveling range (> ±4°). Adjust the device's position until the flashing stops.
• La diffusion vocale ne fonctionne pas : Check if the voice broadcast is turned off by long-pressing the Unit Switch/Sound button. Voice broadcast is also disabled during charging.
• Auto shut-off too fast: The device is designed to shut off after 150 seconds of inactivity to save battery. This duration is fixed and cannot be adjusted.

8. Spécifications

9. Garantie et assistance

9.1. Garantie

This Huepar laser measurement tool comes with a 2-year quality assurance. In the event of a product fault, free repair or replacement will be provided.

9.2. Assistance technique

Huepar is committed to providing best-in-class service to our customers. We offer:

• 24/7 Service Team (response within 24 hours & solution within 48 hours).
• Support technique à vie.
• Worldwide Maintenance Center for faster repair or replacement.

For support, please visit the official Huepar webconsultez notre site ou contactez directement notre service client.

10. Vidéo produitview

Regardez cette vidéo pour un aperçu rapide.view of the Huepar 3-in-1 Laser Measurement Tool's features and functions.

Video 10.1: An official product video demonstrating the key features and usage scenarios of the Huepar SW-T100 3-in-1 Laser Measurement Tool. This video highlights the voice broadcast, distance measurement, laser leveling, and tape measure functions.