Voyager Trainer Skates

Voyager Barney Kids Trainer Skates

Manuel d'instructions

Introduction

Thank you for choosing Voyager Barney Kids Trainer Skates. These skates are designed for active fun and adventures, featuring light-up wheels, ABEC 5 bearings for smooth rolling, and durable PVC construction. This manual provides essential information for setup, operation, maintenance, and safety to ensure a positive experience.

Consignes de sécurité

Always prioritize safety when using these trainer skates. Adult supervision is recommended at all times. Ensure the user wears appropriate safety gear, including a helmet, knee pads, and elbow pads, to prevent injuries. Skate in safe, open areas away from traffic, pedestrians, and uneven surfaces. Regularly inspect skates for wear and tear before each use.

Qu'y a-t-il dans la boîte

  • 1 Pair of Barney Trainer Skates

Configuration et réglage

These trainer skates are designed with adjustable sizing to accommodate growing feet, specifically US sizes 9-12. The secure strap system ensures a comfortable and safe fit.

Voyager Barney Kids Trainer Skates with light-up wheels and ABEC 5 bearings

Image: Voyager Barney Kids Trainer Skates, highlighting light-up wheels, ABEC 5 bearings, and secure fit.

Ajuster la taille

  1. Locate the adjustment mechanism, typically on the side or bottom of the skate.
  2. Unlock the mechanism (refer to specific markings on the skate for guidance, usually an arrow pointing to the desired size).
  3. Slide the front part of the skate forward or backward to select the desired size (9, 10, 11, or 12).
  4. Assurez-vous que le mécanisme se verrouille correctement après réglage.
Côté view of Barney Kids Trainer Skates showing adjustable sizing from 9 to 12

Image : Côté view of the Barney Trainer Skates, illustrating the adjustable sizing feature for US sizes 9-12.

Securing the Skates

The skates feature easy-to-use straps for a secure fit. Place the foot firmly into the skate. Fasten the straps, ensuring they are snug but not overly tight, to provide ankle support and prevent movement within the skate.

Mode d'emploi

These trainer skates are designed for beginners, offering stability and ease of use.

Basic Skating Stance

  • Tenez-vous debout, les pieds écartés à la largeur des épaules, les genoux légèrement fléchis.
  • Lean slightly forward to maintain balance.

Aller de l'avant

  • Prenez appui sur un pied, en glissant vers l'avant sur l'autre.
  • Alternate pushing with each foot to gain momentum.

Arrêt

The skates are equipped with a rear stopper for controlled braking. To stop, gently shift your weight onto your heels and press the rear stopper firmly onto the ground. Practice this motion in a safe, open area until comfortable.

Côté view of Barney Kids Trainer Skates showing the rear stopper

Image : Côté view of the Barney Trainer Skates, illustrating the position of the rear stopper for braking.

Light-Up Wheels

The 54x32mm PU wheels feature an internal mechanism that illuminates as the wheels spin, adding a fun visual element to skating. No batteries are required for the wheel lights.

Close-up of a light-up wheel on Barney Kids Trainer Skates

Image: Close-up of a light-up wheel on the Barney Trainer Skates, demonstrating the illumination feature.

Entretien

  • Nettoyage: Wipe down the skates with a damp cloth after each use to remove dirt and debris. Avoid harsh chemicals.
  • Inspection des roues : Periodically check the wheels for excessive wear or damage. Ensure they spin freely.
  • Entretien des roulements : The ABEC 5 bearings are designed for durability. Keep them clean and dry. Avoid skating through water or sand, which can damage bearings.
  • Vérification de la sangle : Ensure all straps and buckles are in good working condition and securely fastened.
  • Stockage: Store skates in a cool, dry place away from direct sunlight.

Dépannage

  • Wheels not lighting up: Ensure the wheels are spinning with sufficient speed. The lights are motion-activated and do not require batteries. If still not lighting, check for debris obstructing wheel rotation.
  • Difficulté à lancer les dés : Check for debris in the wheels or bearings. Ensure the wheels are not overtightened.
  • Les patins semblent lâches : Re-adjust the sizing mechanism and tighten all straps and buckles for a secure fit.

Caractéristiques

MarqueVoyageur
ModèleTrainer Skates
CouleurBarney
TailleUS 9-12 (Adjustable)
Matériau de la rouePolyuréthane (PU)
Type de roueArtistic Skate Wheel, Light-Up
Taille de la roue54 millimètres
Type de roulementABEC 5
Matériau de la semellePolyuréthane
Type de fermetureLace-Up (Strap System)
MatérielPVC
Poids de l'article1.77 kilogrammes
FabricantSakar International
Code UPC021331151803

Garantie et assistance

These skates are covered by a manufacturer's warranty from Sakar International. For warranty claims or product support, please refer to the contact information provided with your purchase or visit the official Voyager website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.